3DPrinting/KeyV2
1
0
Fork 0
mirror of https://github.com/rsheldiii/KeyV2.git synced 2024-11-22 21:23:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
getting ready for release! I hope
This commit is contained in:
Bob 2018-07-26 01:12:04 -04:00 committed by GitHub
parent c39ce01318
commit 05a34068a4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
README.md
View File

@ -5,7 +5,7 @@
This library is a keycap and keyset construction library for mechanical keyboards, written in openSCAD.
Relevant links:
* Thingiverse: https://www.thingiverse.com/thing:468651
* Thingiverse: https://www.thingiverse.com/thing:2783650
* Shapeways: https://www.shapeways.com/designer/rsheldiii/creations
## How to run
@ -20,13 +20,13 @@ If you find that the Thingiverse Customizer is timing out, but you're not techni
#### OpenSCAD Proper
To run this project, you will need openSCAD. you can download it here: http://www.openscad.org/downloads.html. I highly recommend installing the development snapshot, as they are much further along than the current stable release (as of writing, 2015.03-3). However, this library has been tested down to 2015.03-3 and works well.
First, you'll need OpenSCAD: http://www.openscad.org/downloads.html. I highly recommend installing the development snapshot, as they are much further along than the current stable release (as of writing, 2015.03-3).
After you have openSCAD installed, you need to download the code and run it. running `git clone https://github.com/rsheldiii/openSCAD-projects.git` or downloading [this zip](https://github.com/rsheldiii/openSCAD-projects/archive/master.zip) and extracting the code should do it. Then all you need to do is open `keys.scad` with openSCAD and you are set!
After you have openSCAD installed, you need to download the code and run it. running `git clone https://github.com/rsheldiii/openSCAD-projects.git` if you have git, or downloading [this zip](https://github.com/rsheldiii/openSCAD-projects/archive/master.zip) and extracting the code should do it. Then all you need to do is open `keys.scad` with openSCAD and you are set! It is possible to edit this project with an external editor by checking off Design => Automatic Reload and Preview in OpenSCAD.
All examples below assume you are running the library this way.
All examples below assume you are running the library on your computer with OpenSCAD.
## Let's Go! I wanna make a keycap!
## Let's Go! I wanna make a custom keycap!
At the highest level this library supports Cherry and Alps switches, and has pre-defined key profiles for SA, DSA, DCS, G20 and (some form of) OEM keycaps. `keys.scad` is meant as an entry point for everything but the most technical use. Pre-programmed key profiles can be found at the `key_profiles` directory.