Fix up custimzer.scad

also add git post-commit hook to generate it, so I don't have to do this again

customizer_base.scad

@@ -11,6 +11,8 @@ row = 1; // [5,1,2,3,4,0]
 // What does the top of your key say?
 legend = "";
 
+$using_customizer = true;
+
 include <src/settings.scad>
 
 include <src/key_sizes.scad>
@@ -18,8 +20,7 @@ include <src/key_profiles.scad>
 include <src/key_types.scad>
 include <src/key_transformations.scad>
 include <src/key_helpers.scad>
-
+include <src/key.scad>
-use <src/key.scad>
 
 key_profile(key_profile, row) legend(legend) {
   key();

openscad.rb

@@ -5,12 +5,10 @@ module OpenSCAD
 
     Dir.chdir File.dirname(filename)
     lines = lines.flat_map do |line|
+      # please note we do not implement `use` at all
       if line =~ /(include|use)\s*<(.*)>/
         # File.readlines("./#{$2}")
         expand("./#{$2}")
-      # in lieu of actually implementing `use`, we can just cull this final line from key.scad
-      elsif line =~ /example\_key\(\);/
-        ""
       else
         line
       end

src/key.scad

@@ -430,4 +430,6 @@ module example_key(){
   key();
 }
 
-example_key();
+if (!$using_customizer) {
+  example_key();
+}

src/libraries/skin.scad

@@ -72,66 +72,3 @@ function profile_segment_length(profile,i) = norm(profile[(i+1)%len(profile)] -
 
 // Generates an array with n copies of value (default 0)
 function dup(value=0,n) = [for (i = [1:n]) value];
-
-
-
-
-
-
-
-use <scad-utils/transformations.scad>
-use <scad-utils/trajectory_path.scad>
-use <scad-utils/trajectory.scad>
-use <scad-utils/shapes.scad>
-
-module fakeISOEnter(thickness_difference = 0){
-    // 1u is the space taken upy by a 1u keycap.
-    // unit is the space taken up by a unit space for a keycap.
-    // formula is 1u + unit *(length - 1)
-
-    // t is all modifications to the polygon array
-    t = thickness_difference/2 - (19.02 - 18.16);
-
-    function unit(length) = 19.02 * length;
-
-    pointArray = [
-        [19.05 * (-.5)  + t,      19.05 * (-1)  + t],
-        [19.05 * (0.5)  - t,      19.05 * (-1)  + t],
-        [19.05 * (0.5)  - t,      19.05 * (1)  - t],
-        [19.05 * (-0.75) + t,      19.05 * (1)  - t],
-        [19.05 * (-0.75) + t,      19.05 * (0)  + t],
-        [19.05 * (-0.5) + t,      19.05 * (0)  + t]
-    ];
-
-
-  /*translate([unit(-.5), unit(-1) + 0.86]){*/
-    minkowski() {
-            circle($corner_radius, $fn=20);
-            offset(r=-$corner_radius * 2, $fn=20) polygon(points=pointArray);
-          }
-  /*}*/
-}
-
-function isoEnter() = [
-        [19.05 * (-.5)  + (19.02 - 18.16),      19.05 * (-1)  + (19.02 - 18.16)],
-        [19.05 * (0.5)  - (19.02 - 18.16),      19.05 * (-1)  + (19.02 - 18.16)],
-        [19.05 * (0.5)  - (19.02 - 18.16),      19.05 * (1)  - (19.02 - 18.16)],
-        [19.05 * (-0.75) + (19.02 - 18.16),      19.05 * (1)  - (19.02 - 18.16)],
-        [19.05 * (-0.75) + (19.02 - 18.16),      19.05 * (0)  + (19.02 - 18.16)],
-        [19.05 * (-0.5) + (19.02 - 18.16),      19.05 * (0)  + (19.02 - 18.16)]
-    ];
-
-
-path_definition = [
-trajectory(forward = 10, roll  =  0),
-];
-
-// sweep
-path = quantize_trajectories(path_definition, steps=100);
-
-// skin
-myLen = len(path)-1;
-trans = [ for (i=[0:len(path)-1]) transform(path[i], isoEnter()) ];
-
-translate([0,10,0])
-  skin(trans);

src/settings.scad

@@ -18,8 +18,6 @@ $font_size = 6;
 // Set this to true if you're making a spacebar!
 $inverted_dish = false;
 
-// set this to true if you are making double sculpted keycaps
-$double_sculpted = false;
 // change aggressiveness of double sculpting
 // this is the radius of the cylinder the keytops are placed on
 $double_sculpt_radius = 200;
@@ -31,13 +29,11 @@ $support_type = "flared"; // [flared, bars, flat, disable]
 // Supports for the stem, as it often comes off during printing. Reccommended for most machines
 $stem_support_type = "tines"; // [tines, brim, disabled]
 
-// enable to have stem support extend past the keycap bottom, to (hopefully) the next
+// make legends outset instead of inset.
-// keycap. only works on tines right now
+// broken off from artisan support since who wants outset legends?
-$extra_long_stem_support = false;
+$outset_legends = false;
 
-/* [Advanced] */
+/* [Key] */
-
-/* Key */
 // Height in units of key. should remain 1 for most uses
 $key_height = 1.0;
 // Keytop thickness, aka how many millimeters between the inside and outside of the top surface of the key
@@ -68,7 +64,7 @@ $top_skew = 1.7;
 // for double axis sculpted keycaps and probably not much else
 $top_skew_x = 0;
 
-/* Stem */
+/* [Stem] */
 
 // How far the throw distance of the switch is. determines how far the 'cross' in the cherry switch digs into the stem, and how long the keystem needs to be before supports can start. luckily, alps and cherries have a pretty similar throw. can modify to have stouter keycaps for low profile switches, etc
 $stem_throw = 4;
@@ -82,7 +78,11 @@ $stem_inset = 0;
 // How many degrees to rotate the stems. useful for sideways keycaps, maybe
 $stem_rotation = 0;
 
-/* Shape */
+// enable to have stem support extend past the keycap bottom, to (hopefully) the next
+// keycap. only works on tines right now
+$extra_long_stem_support = false;
+
+/* [Shape] */
 
 // Key shape type, determines the shape of the key. default is 'rounded square'
 $key_shape_type = "rounded_square";
@@ -92,7 +92,7 @@ $linear_extrude_height_adjustment = 0;
 // If you're doing fancy bowed keycap sides, this controls how many slices you take
 $height_slices = 1;
 
-/* Dish */
+/* [Dish] */
 
 // What type of dish the key has. note that unlike stems and supports a dish ALWAYS gets rendered.
 $dish_type = "cylindrical"; // [cylindrical, spherical, sideways cylindrical, old spherical, disable]
@@ -107,7 +107,7 @@ $dish_overdraw_width = 0;
 // Same as width but for height
 $dish_overdraw_height = 0;
 
-/* Misc */
+/* [Misc] */
 // There's a bevel on the cherry stems to aid insertion / guard against first layer squishing making a hard-to-fit stem.
 $cherry_bevel = true;
 
@@ -117,19 +117,19 @@ $stem_support_height = .8;
 $font="DejaVu Sans Mono:style=Book";
 // Whether or not to render fake keyswitches to check clearances
 $clearance_check = false;
-// Use linear_extrude instead of hull slices to make the shape of the key
 // Should be faster, also required for concave shapes
+// Use linear_extrude instead of hull slices to make the shape of the key
 $linear_extrude_shape = false;
 
-// brand new, more correct, hopefully faster, lots more work
 // warns in trajectory.scad but it looks benign
+// brand new, more correct, hopefully faster, lots more work
 $skin_extrude_shape = false;
-//should the key be rounded? unnecessary for most printers, and very slow
+// This doesn't work very well, but you can try
 $rounded_key = false;
 //minkowski radius. radius of sphere used in minkowski sum for minkowski_key function. 1.75 for G20
 $minkowski_radius = .33;
 
-/* Features */
+/* [Features] */
 
 //insert locating bump
 $key_bump = false;
@@ -140,6 +140,9 @@ $key_bump_edge = 0.4;
 
 /* [Hidden] */
 
+// set this to true if you are making double sculpted keycaps
+$double_sculpted = false;
+
 //list of legends to place on a key format: [text, halign, valign, size]
 //halign = "left" or "center" or "right"
 //valign = "top" or "center" or "bottom"
@@ -152,10 +155,6 @@ $legends = [];
 // Currently does not work with thingiverse customizer, and actually breaks it
 $front_legends = [];
 
-// make legends outset instead of inset.
-// broken off from artisan support since who wants outset legends?
-$outset_legends = false;
-
 // print legends on the front of the key instead of the top
 $front_print_legends = false;