mirror of
https://github.com/rsheldiii/KeyV2.git
synced 2024-11-26 23:04:23 +00:00
531 lines
13 KiB
OpenSCAD
531 lines
13 KiB
OpenSCAD
// Row 5? Cherry MX key
|
|
//change to round things better
|
|
$fn = 64;
|
|
|
|
//scale of inner to outer shape
|
|
key_wall_thickness_width = .8;
|
|
key_wall_thickness_height = .8;
|
|
key_wall_thickness_depth = .8;
|
|
//length in units of key
|
|
key_length = 1;
|
|
|
|
|
|
//connector brim
|
|
//enable brim for connector
|
|
has_brim = 0;
|
|
//brim radius. 11 ensconces normal keycap stem in normal keycap
|
|
brim_radius = 11;
|
|
//brim depth
|
|
brim_depth = .3;
|
|
|
|
|
|
|
|
//whether stabilizer connectors are enabled
|
|
stabilizers = 0;
|
|
|
|
//stabilizer distance
|
|
stabilizer_distance = 50;
|
|
|
|
inverted_dish = 0;
|
|
|
|
//keycap type, [0..11]
|
|
key_profile = 1;
|
|
|
|
//profile specific stuff
|
|
|
|
/*god, I would love a class right here
|
|
here we have, for lack of a better implementation, an array
|
|
that defines the more intimate aspects of a key.
|
|
order is thus:
|
|
1. Bottom Key Width: width of the immediate bottom of the key
|
|
2. Bottom Key Height: height of the immediate bottom of the key
|
|
3. Top Key Width Difference: mm to subtract from bottom key width to create top key width
|
|
4. Top Key Height Difference: mm to subtract from bottom key height to create top key height
|
|
5. total Depth: how tall the total in the switch is before dishing
|
|
6. Top Tilt: X rotation of the top. Top and dish obj are rotated
|
|
7. Top Skew: Y skew of the top of the key relative to the bottom. DCS has some, DSA has none (its centered)
|
|
8. Dish Type: type of dishing. currently sphere and cylinder
|
|
9. Dish Depth: how many mm to cut into the key with
|
|
10. Dish Radius: radius of dish obj, the Sphere or Cylinder that cuts into the keycap
|
|
*/
|
|
|
|
key_profiles = [
|
|
|
|
//DCS Profile
|
|
|
|
[ //DCS ROW 5...erm...ish
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
11.5, // total Depth
|
|
-6, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
0, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 1
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
8.5, // total Depth
|
|
-1, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
0, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 2
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6.2, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
7.5, // total Depth
|
|
3, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
0, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 3
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
6.2, // total Depth
|
|
7, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
0, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 4
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
6.2, // total Depth
|
|
16, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
0, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
|
|
//DSA Profile
|
|
|
|
[ //DSA ROW 3
|
|
18.4, // Bottom Key Width
|
|
18.4, // Bottom Key Height
|
|
5.7, // Top Key Width Difference
|
|
5.7, // Top Key Height Difference
|
|
7.4, // total Depth
|
|
0, // Top Tilt
|
|
0, // Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
1, // Dish Type
|
|
1.2, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
|
|
//SA Proile
|
|
|
|
[ //SA ROW 1
|
|
18.4, // Bottom Key Width
|
|
18.4, // Bottom Key Height
|
|
5.7, // Top Key Width Difference
|
|
5.7, // Top Key Height Difference
|
|
13.73, // total Depth, fudged
|
|
0, // Top Tilt
|
|
0, // Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
1, // Dish Type
|
|
2, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //SA ROW 2
|
|
18.4, // Bottom Key Width
|
|
18.4, // Bottom Key Height
|
|
5.7, // Top Key Width Difference
|
|
5.7, // Top Key Height Difference
|
|
11.73, // total Depth
|
|
0, // Top Tilt
|
|
0, // Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
1, // Dish Type
|
|
2, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //SA ROW 3
|
|
18.4, // Bottom Key Width
|
|
18.4, // Bottom Key Height
|
|
5.7, // Top Key Width Difference
|
|
5.7, // Top Key Height Difference
|
|
11.73, // total Depth
|
|
0, // Top Tilt
|
|
0, // Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
1, // Dish Type
|
|
1.6, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //SA ROW 4
|
|
18.4, // Bottom Key Width
|
|
18.4, // Bottom Key Height
|
|
5.7, // Top Key Width Difference
|
|
5.7, // Top Key Height Difference
|
|
11.73, // total Depth
|
|
0, // Top Tilt
|
|
0, // Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
1, // Dish Type
|
|
2, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 2 SPACEBAR
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6.2, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
7.5, // total Depth
|
|
3, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
2, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
[ //DCS ROW 4 SPACEBAR (ORIGINAL)
|
|
18.16, // Bottom Key Width
|
|
18.16, // Bottom Key Height
|
|
6, // Top Key Width Difference
|
|
4, // Top Key Height Difference
|
|
6.2, // total Depth
|
|
16, // Top Tilt
|
|
1.75,// Top Skew
|
|
|
|
//Dish Profile
|
|
|
|
2, // Dish Type
|
|
1, // Dish Depth
|
|
0, // Dish Skew X
|
|
0 // DIsh Skew Y
|
|
],
|
|
];
|
|
|
|
stem_profile=1;
|
|
|
|
//libraries. they generate geometry
|
|
//that is used by other things to generate features
|
|
|
|
//centered
|
|
module roundedRect(size, radius) {
|
|
x = size[0];
|
|
y = size[1];
|
|
z = size[2];
|
|
|
|
translate([-x/2,-y/2,0])
|
|
linear_extrude(height=z)
|
|
hull() {
|
|
translate([radius, radius, 0])
|
|
circle(r=radius);
|
|
|
|
translate([x - radius, radius, 0])
|
|
circle(r=radius);
|
|
|
|
translate([x - radius, y - radius, 0])
|
|
circle(r=radius);
|
|
|
|
translate([radius, y - radius, 0])
|
|
circle(r=radius);
|
|
}
|
|
}
|
|
|
|
|
|
//bottom we can use to anchor things
|
|
module inside(key_profile)
|
|
{
|
|
difference(){
|
|
translate([0,0,50])
|
|
cube([100,100,100],center=true);
|
|
|
|
translate([0,0,-.1])
|
|
shape(key_profile, 3);
|
|
}
|
|
}
|
|
|
|
module cherry_stem(){
|
|
// cross length
|
|
cross_length = 4.4;
|
|
//dimensions of connector
|
|
// outer cross extra length in x
|
|
extra_outer_cross_width = 2.11;
|
|
// outer cross extra length in y
|
|
extra_outer_cross_height = 1.1;
|
|
// dimensions of cross
|
|
// horizontal cross bar width
|
|
horizontal_cross_width = 1.4;
|
|
// vertical cross bar width
|
|
vertical_cross_width = 1.3;
|
|
//extra vertical cross length - the extra length of the up/down bar of the cross
|
|
extra_vertical_cross_length = 1.1;
|
|
// cross depth, stem height is 3.4mm
|
|
cross_depth = 4;
|
|
|
|
difference(){
|
|
union(){
|
|
translate(
|
|
[
|
|
-(cross_length+extra_outer_cross_width)/2,
|
|
-(cross_length+extra_outer_cross_height)/2,
|
|
0
|
|
]
|
|
)
|
|
cube( // the base of the stem, the part the cruciform digs into
|
|
[
|
|
cross_length+extra_outer_cross_width,
|
|
cross_length+extra_outer_cross_height,
|
|
50
|
|
]
|
|
);
|
|
if (has_brim == 1){ cylinder(r=brim_radius,h=brim_depth); }
|
|
}
|
|
//the cross part of the steam
|
|
translate([0,0,(cross_depth)/2]){
|
|
cube([vertical_cross_width,cross_length+extra_vertical_cross_length,cross_depth], center=true );//remove +2 to print with cross
|
|
cube([cross_length,horizontal_cross_width,cross_depth], center=true );
|
|
}
|
|
}
|
|
}
|
|
|
|
module alps_stem(){
|
|
cross_depth = 40;
|
|
width = 4.45;
|
|
height = 2.25;
|
|
|
|
base_width = 12;
|
|
base_height = 15;
|
|
|
|
//translate([0,0,cross_depth + 50/2]) cube([base_width, base_height, 50], center=true);
|
|
translate([0,0,(cross_depth/2)]){
|
|
cube([width,height,cross_depth], center = true);
|
|
}
|
|
|
|
|
|
}
|
|
|
|
//whole connector
|
|
module connector(key_profile,has_brim){
|
|
difference(){
|
|
//TODO can I really not do an array index here?
|
|
if(stem_profile==0) cherry_stem();
|
|
if(stem_profile==1) alps_stem();
|
|
inside(key_profile);
|
|
}
|
|
}
|
|
|
|
//stabilizer connectors
|
|
module stabilizer_connectors(key_profile,has_brim){
|
|
translate([stabilizer_distance,0,0]) connector(key_profile, has_brim);
|
|
translate([-stabilizer_distance,0,0]) connector(key_profile, has_brim);
|
|
}
|
|
|
|
//i h8 u scad
|
|
module shape(key_profile, thickness){
|
|
|
|
bottom_key_width = key_profile[0] ;
|
|
bottom_key_height = key_profile[1];
|
|
top_key_width_difference = key_profile[2];
|
|
top_key_height_difference = key_profile[3];
|
|
total_depth = key_profile[4] - thickness;
|
|
top_tilt = key_profile[5];
|
|
top_skew = key_profile[6];
|
|
|
|
if (inverted_dish == 1){
|
|
difference(){
|
|
union(){
|
|
shape_hull(key_profile, thickness, 1);
|
|
dish(key_profile, thickness);
|
|
}
|
|
outside(key_profile, thickness);
|
|
}
|
|
}
|
|
else{
|
|
difference(){
|
|
shape_hull(key_profile, thickness, 1);
|
|
dish(key_profile, thickness);
|
|
}
|
|
}
|
|
}
|
|
|
|
//conicalish clipping shape to trim things off the outside of the keycap
|
|
module outside(key_profile, thickness){
|
|
difference(){
|
|
cube([100000,100000,100000],center = true);
|
|
shape_hull(key_profile, thickness, 2);
|
|
}
|
|
}
|
|
|
|
//super basic hull shape without dish
|
|
module shape_hull(key_profile, thickness, modifier){
|
|
bottom_key_width = key_profile[0] ;
|
|
bottom_key_height = key_profile[1];
|
|
top_key_width_difference = key_profile[2];
|
|
top_key_height_difference = key_profile[3];
|
|
total_depth = key_profile[4] - thickness;
|
|
top_tilt = key_profile[5];
|
|
top_skew = key_profile[6];
|
|
|
|
hull(){
|
|
roundedRect([bottom_key_width*key_length - thickness,bottom_key_height - thickness,.001],1.5);
|
|
|
|
translate([0,top_skew,total_depth * modifier])
|
|
rotate([-top_tilt,0,0])
|
|
roundedRect([bottom_key_width*key_length - thickness -top_key_width_difference * modifier,bottom_key_height - thickness -top_key_height_difference * modifier,.001],1.5);
|
|
}
|
|
}
|
|
//end libraries
|
|
|
|
//dish selector
|
|
module dish(key_profile){ //this thing is a monster
|
|
// names, so I don't go crazy
|
|
total_key_width = key_profile[0];
|
|
total_key_height = key_profile[1];
|
|
width_difference = key_profile[2];
|
|
height_difference = key_profile[3];
|
|
total_depth = key_profile[4];
|
|
top_tilt = key_profile[5];
|
|
top_skew = key_profile[6];
|
|
dish_type = key_profile[7];
|
|
dish_depth = key_profile[8];
|
|
dish_skew_x = key_profile[9];
|
|
dish_skew_y = key_profile[10];
|
|
|
|
//dependant variables
|
|
key_width = total_key_width * key_length - width_difference;
|
|
key_height = total_key_height - height_difference;
|
|
|
|
if(dish_type == 0){ // cylindrical dish
|
|
/* we do some funky math here
|
|
* basically you want to have the dish "dig in" to the keycap x millimeters
|
|
* in order to do that you have to solve a small (2d) system of equations
|
|
* where the chord of the spherical cross section of the dish is
|
|
* the width of the keycap.
|
|
*/
|
|
// the distance you have to move the dish up so it digs in dish_depth millimeters
|
|
chord_length = (pow(key_width, 2) - 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
//the radius of the dish
|
|
rad = (pow(key_width, 2) + 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
|
|
if (inverted_dish == 1){
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
rotate([90-top_tilt,0,0])
|
|
translate([0,-chord_length,0])
|
|
cylinder(h=100,r=rad, $fn=1024, center=true);
|
|
}
|
|
else{
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
rotate([90-top_tilt,0,0])
|
|
translate([0,chord_length,0])
|
|
cylinder(h=100,r=rad, $fn=1024, center=true);
|
|
}
|
|
}
|
|
else if (dish_type == 1) { // spherical dish
|
|
//same thing here, but we need the corners to just touch - so we have to find the hypotenuse of the top
|
|
chord = pow((pow(key_width,2) + pow(key_height, 2)),0.5); //getting diagonal of the top
|
|
|
|
// the distance you have to move the dish up so it digs in dish_depth millimeters
|
|
chord_length = (pow(chord, 2) - 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
//the radius of the dish
|
|
rad = (pow(chord, 2) + 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
|
|
if (inverted_dish == 1){
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
translate([0,0,-chord_length])
|
|
sphere(r=rad, $fn=256);
|
|
}
|
|
else{
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
translate([0,0,chord_length])
|
|
sphere(r=rad, $fn=256);
|
|
}
|
|
}
|
|
else if (dish_type == 2){// SIDEWAYS cylindrical dish - used for spacebar
|
|
|
|
chord_length = (pow(key_height, 2) - 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
rad = (pow(key_height, 2) + 4 * pow(dish_depth, 2)) / (8 * dish_depth);
|
|
|
|
if (inverted_dish == 1){
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
rotate([90,top_tilt,90])
|
|
translate([0,-chord_length,0])
|
|
cylinder(h=key_width + 20,r=rad, $fn=1024, center=true); // +20 just cuz
|
|
}
|
|
else{
|
|
translate([dish_skew_x, top_skew + dish_skew_y, total_depth])
|
|
rotate([90,top_tilt,90])
|
|
translate([0,chord_length,0])
|
|
cylinder(h=key_width + 20,r=rad, $fn=1024, center=true);
|
|
}
|
|
}
|
|
}
|
|
|
|
//actual full key with space carved out and keystem/stabilizer connectors
|
|
module key(key_profile){
|
|
union(){
|
|
difference(){
|
|
shape(key_profile, 0);
|
|
|
|
translate([0,0,-.1])
|
|
shape(key_profile, 3);
|
|
}
|
|
connector(key_profile,has_brim);
|
|
if (stabilizers == 1){
|
|
stabilizer_connectors(key_profile,has_brim);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
key(key_profiles[key_profile]);
|