diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 36caf2ecb1..9dbb9c90d9 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
index e8e57f0452..b0a8da6630 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
@@ -975,9 +975,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index b23d20b82f..ad4eb4e840 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
index 3a8f593097..73d32ed38b 100644
--- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
+++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h
index 5f5779900a..cc93e57c55 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration.h
@@ -1098,9 +1098,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 56cb9a0033..0e2cb1fab2 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h
index 52ba39a191..ef5df17bb4 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration.h
@@ -961,9 +961,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index aa91f62e95..b59a33568d 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
index 3ef608475a..ab4cdea971 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
@@ -946,9 +946,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index c4976d6ab0..bb5dd1f2ee 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
index d5cdb474bf..76efbb46b9 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 882756de35..73fc480407 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
index 43211e2953..7360921122 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
@@ -946,9 +946,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index c4976d6ab0..bb5dd1f2ee 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 28f03e386b..a992c98848 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -954,9 +954,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 2c298b0c4e..2218f740cd 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h
index 101f0058f1..91be43ca38 100644
--- a/Marlin/example_configurations/Creality/CR-10/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h
@@ -965,9 +965,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 12cb35a956..bc712c070a 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -937,9 +937,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 5c1a7f93a2..485b31960c 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index deb7f11c11..f6fe145731 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -937,9 +937,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h
index ba5fa0ccc3..08bf0c4b24 100644
--- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h	
+++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h	
@@ -960,9 +960,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h
index 29752019f5..ad45a96ae3 100644
--- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h	
+++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h	
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
index cb1db46109..83f57200bb 100644
--- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
@@ -970,9 +970,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 7a70c9f035..281b0a9328 100644
--- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
index 006c73f999..9d99e329ba 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
@@ -959,9 +959,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index fb70c99390..8e702a6aa3 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h
index 82a3c5e345..3a1ce6a279 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration.h
@@ -983,9 +983,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 05ea230b74..65bf34eefb 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 3de04088b7..0a6ee31263 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 89fb1bd08c..e272546349 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -953,9 +953,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 4dbad638f2..9fd3002471 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 0f26a111e4..d9f63f98cf 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -967,9 +967,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 4fa0a83d57..e5ac525ace 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h
index 44077d74ae..bfa1010ab5 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration.h
@@ -986,9 +986,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index b854242c54..f750cddf8f 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -1011,9 +1011,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index a08e44d3a9..ad88380a32 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h
index 0289aaf277..11af55ea21 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h
@@ -984,9 +984,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index a02d1bd555..a4273af4c2 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -235,7 +235,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h
index 68ac58e8f5..d9544cec20 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index cd51ab39f8..6241d4a405 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
index cb3fc4fe74..982cad6124 100644
--- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 0352d24608..1aa2b55cd0 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index 32d865f576..e11590430d 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1083,9 +1083,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 2f40f63296..2896a84114 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 5953fb8693..e80e488031 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -1077,9 +1077,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 4ff8d44edb..f5ae3f5af1 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 4c6d330990..d976cef284 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -1072,9 +1072,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 4ff8d44edb..f5ae3f5af1 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 62d7f2f0db..8c34c35d83 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -1075,9 +1075,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 4ff8d44edb..f5ae3f5af1 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 8cd192b6f8..9bb6c35aa0 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -1075,9 +1075,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 368725a2c2..7295cf7bdb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -227,7 +227,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index d7531f779b..85634696fc 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -1084,9 +1084,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 6b08ea67f2..13083f8dcd 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index 34569c6e62..61b114fe57 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -969,9 +969,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index fb38dc48a3..55c222013e 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 5648fe07c2..e892431a4a 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -958,9 +958,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index feebca86b5..b2c5b637c0 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 7a43a8e84a..19803e30b1 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -950,9 +950,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 89b08e939f..8da53664d8 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index 82018feb31..057d714abd 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -960,9 +960,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 94e2afe11d..d50c8937cf 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -222,7 +222,7 @@
 
 /**
  * Part-Cooling Fan Multiplexer
- * 
+ *
  * This feature allows you to digitally multiplex the fan output.
  * The multiplexer is automatically switched at tool-change.
  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.