From 0b429461d58f1c0a032eae3015ca868eed507047 Mon Sep 17 00:00:00 2001
From: Richard Wackerbarth <rkw@dataplex.net>
Date: Thu, 10 Dec 2015 06:18:34 -0600
Subject: [PATCH] Back port Cosmetic changes
---
.../Felix/Configuration.h | 24 +++++------
.../Felix/Configuration_DUAL.h | 32 +++++++-------
.../Hephestos/Configuration.h | 24 +++++------
.../K8200/Configuration.h | 24 +++++------
.../RepRapWorld/Megatronics/Configuration.h | 24 +++++------
.../RigidBot/Configuration.h | 24 +++++------
.../SCARA/Configuration.h | 42 +++++++++----------
.../TAZ4/Configuration.h | 24 +++++------
.../WITBOX/Configuration.h | 24 +++++------
.../adafruit/ST7565/Configuration.h | 24 +++++------
.../delta/biv2.5/Configuration.h | 24 +++++------
.../delta/generic/Configuration.h | 24 +++++------
.../delta/kossel_mini/Configuration.h | 24 +++++------
.../delta/kossel_pro/Configuration.h | 24 +++++------
.../makibox/Configuration.h | 24 +++++------
.../tvrrug/Round2/Configuration.h | 24 +++++------
16 files changed, 205 insertions(+), 205 deletions(-)
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index c06bfa0517..f946d35c0a 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -460,14 +460,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -486,14 +486,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index a0368c40e9..bd7b8eed4e 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -228,10 +228,10 @@ Here are some standard links for getting your machine calibrated:
//#define PID_BED_DEBUG // Sends debug data to the serial port.
#if ENABLED(PIDTEMPBED)
-// Felix Foil Heater
- #define DEFAULT_bedKp 103.37
- #define DEFAULT_bedKi 2.79
- #define DEFAULT_bedKd 956.94
+ // Felix Foil Heater
+ #define DEFAULT_bedKp 103.37
+ #define DEFAULT_bedKi 2.79
+ #define DEFAULT_bedKd 956.94
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@@ -431,14 +431,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -457,14 +457,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index cd71535488..9fe3715f7f 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -471,14 +471,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -497,14 +497,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 3287924dc5..426d8e9b68 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -466,14 +466,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -492,14 +492,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 115baee3cd..e03debc8fc 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -479,14 +479,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -505,14 +505,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 154a5da778..987fc36d33 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -464,14 +464,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -490,14 +490,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index da24a5b214..05c315917f 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -331,9 +331,9 @@ Here are some standard links for getting your machine calibrated:
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
//#define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX
- #define ENDSTOPPULLUP_ZMAX // open pin, inverted
- #define ENDSTOPPULLUP_XMIN // open pin, inverted
- #define ENDSTOPPULLUP_YMIN // open pin, inverted
+ #define ENDSTOPPULLUP_ZMAX // open pin, inverted
+ #define ENDSTOPPULLUP_XMIN // open pin, inverted
+ #define ENDSTOPPULLUP_YMIN // open pin, inverted
//#define ENDSTOPPULLUP_ZMIN
//#define ENDSTOPPULLUP_ZMIN_PROBE
#endif
@@ -486,14 +486,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -512,21 +512,21 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
- //#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
- // When defined, it will:
- // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
- // - If stepper drivers timeout, it will need X and Y homing again before Z homing.
- // - Position the Z probe in a defined XY point before Z Homing when homing all axis (G28).
- // - Block Z homing only when the Z probe is outside bed area.
+ //#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
+ // When defined, it will:
+ // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
+ // - If stepper drivers timeout, it will need X and Y homing again before Z homing.
+ // - Position the Z probe in a defined XY point before Z Homing when homing all axis (G28).
+ // - Block Z homing only when the Z probe is outside bed area.
#if ENABLED(Z_SAFE_HOMING)
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index d7f312a4fc..484d32da14 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -497,14 +497,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -523,14 +523,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 19fc03403f..2d235e59e7 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -470,14 +470,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -496,14 +496,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 90935308de..442ee1d7b4 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -479,14 +479,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -505,14 +505,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index bbb15ffa8f..ec78143c63 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -517,14 +517,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -543,8 +543,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 50 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@@ -630,8 +630,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
#endif
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 7b8afbef08..78284a928d 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -518,14 +518,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -544,8 +544,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points
#define Z_RAISE_AFTER_PROBING 50 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@@ -631,8 +631,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
#endif
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index ba37cff436..75e4d11ba4 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -518,14 +518,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -544,8 +544,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points
#define Z_RAISE_AFTER_PROBING 50 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@@ -635,8 +635,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
#endif
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index ed798c4e49..43fc9ae738 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -505,14 +505,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -533,8 +533,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@@ -620,8 +620,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
#endif
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index db943ee528..2f8fd73ba8 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -481,14 +481,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -507,14 +507,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will:
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 50b9a28801..9a6aac98d3 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -469,14 +469,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#else // !AUTO_BED_LEVELING_GRID
- // Arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define ABL_PROBE_PT_1_X 15
- #define ABL_PROBE_PT_1_Y 180
- #define ABL_PROBE_PT_2_X 15
- #define ABL_PROBE_PT_2_Y 20
- #define ABL_PROBE_PT_3_X 170
- #define ABL_PROBE_PT_3_Y 20
+ // Arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
#endif // AUTO_BED_LEVELING_GRID
@@ -495,14 +495,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
#define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
- // Useful to retract a deployable Z probe.
+ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
+ // Useful to retract a deployable Z probe.
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
-// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
-// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
+ // If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
+ // it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will: