From 0b9ecf38242bb4847d15e3c341114d6f25101a27 Mon Sep 17 00:00:00 2001
From: Martin Lukasik <martin.lukasik@productmadness.com>
Date: Wed, 12 Feb 2014 13:21:26 +0000
Subject: [PATCH] Language cleanup, part 1.
---
Marlin/language.h | 391 ++++++++++++++++++++++++----------------------
1 file changed, 205 insertions(+), 186 deletions(-)
diff --git a/Marlin/language.h b/Marlin/language.h
index 26fd1a26e5..ab3bf63558 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -19,7 +19,7 @@
// 10 Aragonese
#ifndef LANGUAGE_CHOICE
-#define LANGUAGE_CHOICE 1 // Pick your language from the list above
+ #define LANGUAGE_CHOICE 1 // Pick your language from the list above
#endif
#define PROTOCOL_VERSION "1.0"
@@ -54,27 +54,37 @@
#define STRINGIFY(n) STRINGIFY_(n)
+// Common LCD messages
+/* nothing here as of yet */
+
+// Common serial messages
+#define MSG_MARLIN "Marlin"
+
+
+
#if LANGUAGE_CHOICE == 1
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Ready."
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Disable Steppers"
- #define MSG_AUTO_HOME "Auto Home"
- #define MSG_SET_ORIGIN "Set Origin"
+ #define MSG_DISABLE_STEPPERS "Disable steppers"
+ #define MSG_AUTO_HOME "Auto home"
+ #define MSG_SET_ORIGIN "Set origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
+ #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
#define MSG_PREHEAT_ABS "Preheat ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
+ #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
#define MSG_COOLDOWN "Cooldown"
- #define MSG_SWITCH_PS_ON "Switch Power On"
- #define MSG_SWITCH_PS_OFF "Switch Power Off"
+ #define MSG_SWITCH_PS_ON "Switch power on"
+ #define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
- #define MSG_MOVE_AXIS "Move Axis"
+ #define MSG_MOVE_AXIS "Move axis"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
@@ -123,16 +133,16 @@
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
- #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
+ #define MSG_RESTORE_FAILSAFE "Restore failsafe"
#define MSG_REFRESH "Refresh"
#define MSG_WATCH "Info screen"
#define MSG_PREPARE "Prepare"
#define MSG_TUNE "Tune"
- #define MSG_PAUSE_PRINT "Pause Print"
- #define MSG_RESUME_PRINT "Resume Print"
- #define MSG_STOP_PRINT "Stop Print"
+ #define MSG_PAUSE_PRINT "Pause print"
+ #define MSG_RESUME_PRINT "Resume print"
+ #define MSG_STOP_PRINT "Stop print"
#define MSG_CARD_MENU "Print from SD"
- #define MSG_NO_CARD "No Card"
+ #define MSG_NO_CARD "No SD card"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_RESUMING "Resuming print"
@@ -146,9 +156,9 @@
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament"
- #define MSG_INIT_SDCARD "Init. SD-Card"
- #define MSG_CNG_SDCARD "Change SD-Card"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_INIT_SDCARD "Init. SD card"
+ #define MSG_CNG_SDCARD "Change SD card"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -165,7 +175,6 @@
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
@@ -231,13 +240,17 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
#if LANGUAGE_CHOICE == 2
+
// LCD Menu Messages
+// Please note these are limited to 17 characters!
+
#define WELCOME_MSG MACHINE_NAME " gotowy."
#define MSG_SD_INSERTED "Karta wlozona"
#define MSG_SD_REMOVED "Karta usunieta"
@@ -245,11 +258,11 @@
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_AUTO_HOME "Auto. poz. zerowa"
- #define MSG_SET_ORIGIN "Ustaw punkt zerowy"
+ #define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
#define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
@@ -260,7 +273,7 @@
#define MSG_MOVE_Y "Przesun w Y"
#define MSG_MOVE_Z "Przesun w Z"
#define MSG_MOVE_E "Ekstruzja (os E)"
- #define MSG_MOVE_01MM "Przesuwaj co 0.1mm"
+ #define MSG_MOVE_01MM "Przesuwaj co .1mm"
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
#define MSG_SPEED "Predkosc"
@@ -304,7 +317,7 @@
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
- #define MSG_RESTORE_FAILSAFE "Ustawienia fabryczne"
+ #define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
#define MSG_REFRESH "\004Odswiez"
#define MSG_WATCH "Ekran glowny"
#define MSG_PREPARE "Przygotuj"
@@ -316,10 +329,9 @@
#define MSG_CARD_MENU "Menu karty SD"
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
- #define MSG_USERWAIT "Czekam na uzytkownika..."
- #define MSG_RESUMING "Wznawiam drukowanie"
- #define MSG_NO_MOVE "Brak ruchu."
- #define MSG_PART_RELEASE "Czesciowe zwolnienie"
+ #define MSG_USERWAIT "Oczekiwanie..."
+ #define MSG_RESUMING "Wznawianie druku"
+ #define MSG_NO_MOVE "Brak ruchu"
#define MSG_KILLED "Ubity. "
#define MSG_STOPPED "Zatrzymany. "
#define MSG_STEPPER_RELEASED "Zwolniony."
@@ -330,15 +342,15 @@
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Zmien filament"
- #define MSG_INIT_SDCARD "Inicjalizacja karty"
+ #define MSG_INIT_SDCARD "Inicjal. karty SD"
#define MSG_CNG_SDCARD "Zmiana karty SD"
- #define MSG_ZPROBE_OUT "Probkuj Z poza lozem"
- #define MSG_POSITION_UNKNOWN "Powrot w X/Y przed Z"
+ #define MSG_ZPROBE_OUT "Sonda Z za lozem"
+ #define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
#define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
- #define MSG_ENDSTOP_ABORT "Blad wyl. krancowego"
+ #define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
#define MSG_CONTRAST "Kontrast"
// Serial Console Messages
@@ -349,7 +361,6 @@
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
#define MSG_WATCHDOG_RESET " Reset (watchdog)"
#define MSG_SOFTWARE_RESET " Reset (programowy)"
- #define MSG_MARLIN "Marlin"
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
#define MSG_FREE_MEMORY " Wolna pamiec: "
@@ -415,12 +426,16 @@
#define MSG_BABYSTEPPING_X "Babystepping w osi X"
#define MSG_BABYSTEPPING_Y "Babystepping w osi Y"
#define MSG_BABYSTEPPING_Z "Babystepping w osi Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
#if LANGUAGE_CHOICE == 3
+// LCD Menu Messages
+// Please note these are limited to 17 characters!
+
#define WELCOME_MSG MACHINE_NAME " prete."
#define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree"
@@ -430,9 +445,9 @@
#define MSG_AUTO_HOME "Home auto."
#define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA " Prechauffage PLA"
- #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS " Regl. prech. PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Regl. prechauffe ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
#define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim."
#define MSG_SWITCH_PS_OFF "Eteindre alim."
@@ -453,7 +468,7 @@
#define MSG_NOZZLE1 "Buse2"
#define MSG_NOZZLE2 "Buse3"
#define MSG_BED "Plateau"
- #define MSG_FAN_SPEED "Vitesse ventilateur"
+ #define MSG_FAN_SPEED "Vite. ventilateur"
#define MSG_FLOW "Flux"
#define MSG_CONTROL "Controler"
#define MSG_MIN " \002 Min"
@@ -499,10 +514,9 @@
#define MSG_CARD_MENU "Impr. depuis SD"
#define MSG_NO_CARD "Pas de carte"
#define MSG_DWELL "Repos..."
- #define MSG_USERWAIT "Attente de l'utilisateur..."
- #define MSG_RESUMING "Reprise de l'impression"
+ #define MSG_USERWAIT "Atten. de l'util."
+ #define MSG_RESUMING "Repri. de l'impr."
#define MSG_NO_MOVE "Aucun mouvement."
- #define MSG_PART_RELEASE "Relache partielle"
#define MSG_KILLED "MORT."
#define MSG_STOPPED "STOPPE."
#define MSG_STEPPER_RELEASED "RELACHE."
@@ -514,14 +528,14 @@
#define MSG_AUTORETRACT "Retract. Auto."
#define MSG_FILAMENTCHANGE "Changer filament"
#define MSG_INIT_SDCARD "Init. la carte SD"
- #define MSG_CNG_SDCARD "Changer de carte SD"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
- #define MSG_POSITION_UNKNOWN "Home X/Y before Z"
- #define MSG_ZPROBE_ZOFFSET "Z Offset"
+ #define MSG_CNG_SDCARD "Changer de carte"
+ #define MSG_ZPROBE_OUT "Z sonde exte. lit"
+ #define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
+ #define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
- #define MSG_ENDSTOP_ABORT "Endstop abort"
+ #define MSG_ENDSTOP_ABORT "Butee abandon"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages
@@ -532,7 +546,6 @@
#define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_WATCHDOG_RESET " RAZ Watchdog"
#define MSG_SOFTWARE_RESET " RAZ logicielle"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Auteur: "
#define MSG_CONFIGURATION_VER " Derniere MaJ: "
#define MSG_FREE_MEMORY " Memoire libre: "
@@ -598,6 +611,7 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
@@ -605,6 +619,7 @@
#if LANGUAGE_CHOICE == 4
// LCD Menu Messages
+// Please note these are limited to 17 characters!
#define WELCOME_MSG MACHINE_NAME " Bereit."
@@ -612,13 +627,13 @@
#define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN "Hauptmenü"
#define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Stepper abschalten"
+ #define MSG_DISABLE_STEPPERS "Stepper abschalt."
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
+ #define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
+ #define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
@@ -685,10 +700,9 @@
#define MSG_CARD_MENU "SDKarten Menü"
#define MSG_NO_CARD "Keine SDKarte"
#define MSG_DWELL "Warten..."
- #define MSG_USERWAIT "Warte auf Nutzer..."
+ #define MSG_USERWAIT "Warte auf Nutzer"
#define MSG_RESUMING "Druck fortsetzung"
#define MSG_NO_MOVE "Kein Zug."
- #define MSG_PART_RELEASE "Stepper tlw frei"
#define MSG_KILLED "KILLED"
#define MSG_STOPPED "GESTOPPT"
#define MSG_STEPPER_RELEASED "Stepper frei"
@@ -701,7 +715,7 @@
#define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -718,7 +732,6 @@
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin: "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
@@ -784,6 +797,7 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
@@ -791,14 +805,16 @@
#if LANGUAGE_CHOICE == 5
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME "Lista."
- #define MSG_SD_INSERTED "Tarjeta SD Colocada"
- #define MSG_SD_REMOVED "Tarjeta SD Retirada"
- #define MSG_MAIN "Menu Principal"
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " lista."
+ #define MSG_SD_INSERTED "Tarjeta colocada"
+ #define MSG_SD_REMOVED "Tarjeta retirada"
+ #define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS "Apagar Motores"
- #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"
- #define MSG_SET_ORIGIN "Establecer Cero"
+ #define MSG_DISABLE_STEPPERS "Apagar motores"
+ #define MSG_AUTO_HOME "Llevar al origen"
+ #define MSG_SET_ORIGIN "Establecer cero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
@@ -808,7 +824,7 @@
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer"
- #define MSG_MOVE_AXIS "Mover Ejes"
+ #define MSG_MOVE_AXIS "Mover ejes"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
@@ -854,24 +870,24 @@
#define MSG_RECTRACT "Retraer"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
- #define MSG_STORE_EPROM "Guardar Memoria"
- #define MSG_LOAD_EPROM "Cargar Memoria"
- #define MSG_RESTORE_FAILSAFE "Rest. de emergencia"
+ #define MSG_STORE_EPROM "Guardar memoria"
+ #define MSG_LOAD_EPROM "Cargar memoria"
+ #define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "Volver a cargar"
#define MSG_WATCH "Monitorizar"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Ajustar"
- #define MSG_PAUSE_PRINT "Pausar Impresion"
- #define MSG_RESUME_PRINT "Reanudar Impresion"
- #define MSG_STOP_PRINT "Detener Impresion"
+ #define MSG_PAUSE_PRINT "Pausar impresion"
+ #define MSG_RESUME_PRINT "Reanudar impres."
+ #define MSG_STOP_PRINT "Detener impresion"
#define MSG_CARD_MENU "Menu de SD"
- #define MSG_NO_CARD "No hay Tarjeta SD"
+ #define MSG_NO_CARD "No hay tarjeta SD"
#define MSG_DWELL "Reposo..."
- #define MSG_USERWAIT "Esperando Ordenes..."
- #define MSG_RESUMING "Resumiendo Impresion"
+ #define MSG_USERWAIT "Esperando ordenes"
+ #define MSG_RESUMING "Resumiendo impre."
#define MSG_NO_MOVE "Sin movimiento"
- #define MSG_KILLED "PARADA DE EMERGENCIA. "
- #define MSG_STOPPED "PARADA."
+ #define MSG_KILLED "PARADA DE EMERG."
+ #define MSG_STOPPED "PARADA"
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
@@ -879,19 +895,18 @@
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament"
- #define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"
- #define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"
+ #define MSG_INIT_SDCARD "Iniciando tarjeta"
+ #define MSG_CNG_SDCARD "Cambiar tarjeta"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
- #define MSG_MAIN_WIDE "Menu Principal"
+ #define MSG_MAIN_WIDE "Menu principal"
#define MSG_MOTION_WIDE "Movimiento"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control"
#define MSG_RETRACT_ARROW "Retraer"
- #define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_STEPPER_RELEASED "Desacoplada."
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -908,7 +923,6 @@
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_SOFTWARE_RESET " Reset por Software"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
#define MSG_FREE_MEMORY " Memoria libre: "
@@ -973,13 +987,17 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
#if LANGUAGE_CHOICE == 6
- // LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Готов"
+
+// LCD Menu Messages
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MAIN " Меню \003"
@@ -1042,7 +1060,7 @@
#define MSG_RECTRACT " Откат подачи \x7E"
#define MSG_TEMPERATURE " Температура \x7E"
#define MSG_MOTION " Скорости \x7E"
- #define MSG_CONTRAST "LCD contrast"
+ #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_RESTORE_FAILSAFE " Сброс настроек "
@@ -1059,7 +1077,6 @@
#define MSG_USERWAIT "Нажмите для продолж."
#define MSG_RESUMING "Resuming print"
#define MSG_NO_MOVE "Нет движения. "
- #define MSG_PART_RELEASE " Извлечение принта "
#define MSG_KILLED "УБИТО. "
#define MSG_STOPPED "ОСТАНОВЛЕНО. "
#define MSG_CONTROL_RETRACT " Откат mm:"
@@ -1071,7 +1088,7 @@
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -1088,7 +1105,6 @@
#define MSG_BROWNOUT_RESET " Brown out сброс"
#define MSG_WATCHDOG_RESET " Watchdog сброс"
#define MSG_SOFTWARE_RESET " программный сброс"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Автор: "
#define MSG_CONFIGURATION_VER " Последнее обновление: "
#define MSG_FREE_MEMORY " Памяти свободно: "
@@ -1152,14 +1168,17 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
#if LANGUAGE_CHOICE == 7
- // LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Pronta"
+// LCD Menu Messages
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_MAIN "Menu principale"
@@ -1247,11 +1266,10 @@
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoArretramento"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
#define MSG_FILAMENTCHANGE "Cambia filamento"
#define MSG_INIT_SDCARD "Iniz. SD-Card"
#define MSG_CNG_SDCARD "Cambia SD-Card"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -1260,7 +1278,7 @@
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
- // Serial Console Messages
+// Serial Console Messages
#define MSG_Enqueing "accodamento \""
#define MSG_POWERUP "Accensione"
@@ -1268,7 +1286,6 @@
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autore: "
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
#define MSG_FREE_MEMORY " Memoria Libera: "
@@ -1334,6 +1351,7 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
#endif
@@ -1341,26 +1359,28 @@
#if LANGUAGE_CHOICE == 8
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Pronta."
- #define MSG_SD_INSERTED "Cartao SD inserido"
- #define MSG_SD_REMOVED "Cartao SD removido"
- #define MSG_MAIN " Menu Principal \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Apagar Motores"
- #define MSG_AUTO_HOME " Ir para Origen"
- #define MSG_SET_ORIGIN " Estabelecer Origen"
- #define MSG_PREHEAT_PLA " pre-aquecer PLA"
- #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
- #define MSG_PREHEAT_ABS " pre-aquecer ABS"
- #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
- #define MSG_COOLDOWN " Esfriar"
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " pronto."
+ #define MSG_SD_INSERTED "Cartao inserido"
+ #define MSG_SD_REMOVED "Cartao removido"
+ #define MSG_MAIN " Menu principal \003"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS " Apagar motores"
+ #define MSG_AUTO_HOME "Ir para origen"
+ #define MSG_SET_ORIGIN "Estabelecer orig."
+ #define MSG_PREHEAT_PLA "Pre-aquecer PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
+ #define MSG_PREHEAT_ABS "Pre-aquecer ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
+ #define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
- #define MSG_EXTRUDE " Extrudar"
- #define MSG_RETRACT " Retrair"
- #define MSG_PREHEAT_PLA " pre-aquecer PLA"
- #define MSG_PREHEAT_ABS " pre-aquecer ABS"
- #define MSG_MOVE_AXIS " Mover eixo \x7E"
+ #define MSG_EXTRUDE "Extrudar"
+ #define MSG_RETRACT "Retrair"
+ #define MSG_PREHEAT_PLA "Pre-aquecer PLA"
+ #define MSG_PREHEAT_ABS "Pre-aquecer ABS"
+ #define MSG_MOVE_AXIS "Mover eixo \x7E"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
@@ -1368,26 +1388,26 @@
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
- #define MSG_SPEED " Velocidade:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_NOZZLE1 " \002Nozzle2:"
- #define MSG_NOZZLE2 " \002Nozzle3:"
- #define MSG_BED " \002Base:"
- #define MSG_FAN_SPEED " Velocidade Ventoinha:"
- #define MSG_FLOW " Fluxo:"
- #define MSG_CONTROL " Controle \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
+ #define MSG_SPEED "Velocidade:"
+ #define MSG_NOZZLE "\002Nozzle:"
+ #define MSG_NOZZLE1 "\002Nozzle2:"
+ #define MSG_NOZZLE2 "\002Nozzle3:"
+ #define MSG_BED "\002Base:"
+ #define MSG_FAN_SPEED "Velocidade vento."
+ #define MSG_FLOW "Fluxo:"
+ #define MSG_CONTROL "Controle \003"
+ #define MSG_MIN "\002 Min:"
+ #define MSG_MAX "\002 Max:"
+ #define MSG_FACTOR "\002 Fact:"
+ #define MSG_AUTOTEMP "Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
+ #define MSG_PID_P "PID-P: "
+ #define MSG_PID_I "PID-I: "
+ #define MSG_PID_D "PID-D: "
+ #define MSG_PID_C "PID-C: "
+ #define MSG_ACC "Acc:"
+ #define MSG_VXY_JERK "Vxy-jerk: "
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX " Vmax "
@@ -1395,39 +1415,38 @@
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xpasso/mm:"
- #define MSG_YSTEPS " Ypasso/mm:"
- #define MSG_ZSTEPS " Zpasso/mm:"
- #define MSG_ESTEPS " Epasso/mm:"
- #define MSG_MAIN_WIDE " Menu Principal \003"
+ #define MSG_VMIN "Vmin:"
+ #define MSG_VTRAV_MIN "VTrav min:"
+ #define MSG_AMAX "Amax "
+ #define MSG_A_RETRACT "A-retract:"
+ #define MSG_XSTEPS "Xpasso/mm:"
+ #define MSG_YSTEPS "Ypasso/mm:"
+ #define MSG_ZSTEPS "Zpasso/mm:"
+ #define MSG_ESTEPS "Epasso/mm:"
+ #define MSG_MAIN_WIDE "Menu Principal \003"
#define MSG_RECTRACT "Retrair"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
- #define MSG_STORE_EPROM " Guardar memoria"
- #define MSG_LOAD_EPROM " Carregar memoria"
- #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+ #define MSG_STORE_EPROM "Guardar memoria"
+ #define MSG_LOAD_EPROM "Carregar memoria"
+ #define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "\004Recarregar"
- #define MSG_WATCH " Monitorar \003"
- #define MSG_PREPARE " Preparar \x7E"
- #define MSG_PREPARE_ALT " Preparar \003"
- #define MSG_CONTROL_ARROW " Controle \x7E"
- #define MSG_RETRACT_ARROW " Retrair \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
- #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
- #define MSG_STOP_PRINT " Parar Impressao \x7E"
- #define MSG_CARD_MENU " Menu cartao SD \x7E"
- #define MSG_NO_CARD " Sem cartao SD"
+ #define MSG_WATCH "Monitorar \003"
+ #define MSG_PREPARE "Preparar \x7E"
+ #define MSG_PREPARE_ALT "Preparar \003"
+ #define MSG_CONTROL_ARROW "Controle \x7E"
+ #define MSG_RETRACT_ARROW "Retrair \x7E"
+ #define MSG_TUNE "Tune \x7E"
+ #define MSG_PAUSE_PRINT "Pausar impressao"
+ #define MSG_RESUME_PRINT "Resumir impressao"
+ #define MSG_STOP_PRINT "Parar impressao"
+ #define MSG_CARD_MENU "Menu cartao SD"
+ #define MSG_NO_CARD "Sem cartao SD"
#define MSG_DWELL "Repouso..."
- #define MSG_USERWAIT "Esperando Ordem..."
+ #define MSG_USERWAIT "Esperando ordem"
#define MSG_RESUMING "Resuming print"
- #define MSG_NO_MOVE "Sem movimento."
- #define MSG_PART_RELEASE "Lancamento Parcial"
- #define MSG_KILLED "PARADA DE EMERGENCIA. "
+ #define MSG_NO_MOVE "Sem movimento"
+ #define MSG_KILLED "PARADA DE EMERG."
#define MSG_STOPPED "PARADA. "
#define MSG_STEPPER_RELEASED "Lancado."
#define MSG_CONTROL_RETRACT " Retrair mm:"
@@ -1436,12 +1455,11 @@
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_AUTORETRACT " AutoRetr.:"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
- #define MSG_ZPROBE_OUT "Sonda fora da mesa"
- #define MSG_POSITION_UNKNOWN "Home X/Y antes de Z"
+ #define MSG_ZPROBE_OUT "Son. fora da mesa"
+ #define MSG_POSITION_UNKNOWN "XY antes de Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
@@ -1457,7 +1475,6 @@
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
#define MSG_SOFTWARE_RESET " Reset por Software"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
#define MSG_FREE_MEMORY " memoria Livre: "
@@ -1523,6 +1540,7 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
#endif
@@ -1530,10 +1548,10 @@
#if LANGUAGE_CHOICE == 9
-// Finnish
-
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " valmis"
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " valmis."
#define MSG_SD_INSERTED "Kortti asetettu"
#define MSG_SD_REMOVED "Kortti poistettu"
#define MSG_MAIN "Palaa"
@@ -1542,9 +1560,9 @@
#define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilammita PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
+ #define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
#define MSG_PREHEAT_ABS "Esilammita ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
+ #define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
#define MSG_COOLDOWN "Jaahdyta"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
@@ -1610,8 +1628,8 @@
#define MSG_CARD_MENU "Korttivalikko"
#define MSG_NO_CARD "Ei korttia"
#define MSG_DWELL "Nukkumassa..."
- #define MSG_USERWAIT "Odotetaan valintaa..."
- #define MSG_RESUMING "Jatketaan tulostusta"
+ #define MSG_USERWAIT "Odotet. valintaa"
+ #define MSG_RESUMING "Jatke. tulostusta"
#define MSG_NO_MOVE "Ei liiketta."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
@@ -1624,7 +1642,7 @@
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -1641,7 +1659,6 @@
#define MSG_BROWNOUT_RESET " Alajannite Reset"
#define MSG_WATCHDOG_RESET " Vahtikoira Reset"
#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
#define MSG_FREE_MEMORY " Vapaata muistia: "
@@ -1709,24 +1726,27 @@
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif
#if LANGUAGE_CHOICE == 10
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Parada."
- #define MSG_SD_INSERTED "Tarcheta SD Colocada"
- #define MSG_SD_REMOVED "Tarcheta SD Retirada"
- #define MSG_MAIN "Menu Prencipal"
+// Please note these are limited to 17 characters!
+
+ #define WELCOME_MSG MACHINE_NAME " parada."
+ #define MSG_SD_INSERTED "Tarcheta colocada"
+ #define MSG_SD_REMOVED "Tarcheta retirada"
+ #define MSG_MAIN "Menu prencipal"
#define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS "Amortar Motors"
- #define MSG_AUTO_HOME "Levar a l'Orichen" // "Levar Eixes a o Zero"
- #define MSG_SET_ORIGIN "Establir Zero"
+ #define MSG_DISABLE_STEPPERS "Amortar motors"
+ #define MSG_AUTO_HOME "Levar a l'orichen"
+ #define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Achustar temp. PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Achustar temp. ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
@@ -1780,21 +1800,21 @@
#define MSG_MOTION "Movimiento"
#define MSG_STORE_EPROM "Alzar Memoria"
#define MSG_LOAD_EPROM "Cargar Memoria"
- #define MSG_RESTORE_FAILSAFE "Rest. d'emerchencia"
+ #define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."
#define MSG_REFRESH "Tornar a cargar"
#define MSG_WATCH "Monitorizar"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Achustar"
- #define MSG_PAUSE_PRINT "Pausar Impresion"
- #define MSG_RESUME_PRINT "Continar Impresion"
+ #define MSG_PAUSE_PRINT "Pausar impresion"
+ #define MSG_RESUME_PRINT "Contin. impresion"
#define MSG_STOP_PRINT "Detener Impresion"
#define MSG_CARD_MENU "Menu de SD"
- #define MSG_NO_CARD "No i hai Tarcheta SD"
+ #define MSG_NO_CARD "No i hai tarcheta"
#define MSG_DWELL "Reposo..."
- #define MSG_USERWAIT "Asperando Ordines..."
- #define MSG_RESUMING "Continando Impresion"
+ #define MSG_USERWAIT "Asperan. ordines"
+ #define MSG_RESUMING "Contin. impresion"
#define MSG_NO_MOVE "Sin movimiento"
- #define MSG_KILLED "ATURADA D'EMERCHENCIA. "
+ #define MSG_KILLED "ATURADA D'EMERCH."
#define MSG_STOPPED "ATURADA."
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer F"
@@ -1803,8 +1823,8 @@
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Cambear"
- #define MSG_INIT_SDCARD "Encetando. Tarcheta-SD"
- #define MSG_CNG_SDCARD "Cambiar Tarcheta-SD"
+ #define MSG_INIT_SDCARD "Encetan. tarcheta"
+ #define MSG_CNG_SDCARD "Cambiar tarcheta"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
@@ -1813,9 +1833,8 @@
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control"
#define MSG_RETRACT_ARROW "Retraer"
- #define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_STEPPER_RELEASED "Desacoplada."
- #define MSG_ZPROBE_OUT "ZProbe Outside Bed"
+ #define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
@@ -1832,7 +1851,6 @@
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_SOFTWARE_RESET " Reset por Software"
- #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Zaguer esvielle: "
#define MSG_FREE_MEMORY " Memoria libre: "
@@ -1897,6 +1915,7 @@
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#endif