From f2440452459c7f3aefbdd66dbb84cb30ff86cf63 Mon Sep 17 00:00:00 2001 From: bonm014 <mkdebont@zonnet.nl> Date: Thu, 3 Jul 2014 21:01:41 +0200 Subject: [PATCH 1/3] Update pins.h Leapfrog board added to the pin list --- Marlin/pins.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/Marlin/pins.h b/Marlin/pins.h index c3644a086a..19432aaeee 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -94,6 +94,72 @@ #endif /* 88 */ +/**************************************************************************************** +* Leapfrog Driver board +* +****************************************************************************************/ +#if MOTHERBOARD == 999 // Leapfrog board +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 28 +#define X_DIR_PIN 63 +#define X_ENABLE_PIN 29 +#define X_MIN_PIN 47 +#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable. + +#define Y_STEP_PIN 14 // A6 +#define Y_DIR_PIN 15 // A0 +#define Y_ENABLE_PIN 39 +#define Y_MIN_PIN 48 +#define Y_MAX_PIN -1 //15 + +#define Z_STEP_PIN 31 // A2 +#define Z_DIR_PIN 32 // A6 +#define Z_ENABLE_PIN 30 // A1 +#define Z_MIN_PIN 49 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 34 //34 +#define E0_DIR_PIN 35 //35 +#define E0_ENABLE_PIN 33 //33 + +#define E1_STEP_PIN 37 //37 +#define E1_DIR_PIN 40 //40 +#define E1_ENABLE_PIN 36 //36 + +#define Y2_STEP_PIN 37 +#define Y2_DIR_PIN 40 +#define Y2_ENABLE_PIN 36 + +#define SDPOWER -1 +#define SDSS 11 +#define SDCARDDETECT -1 // 10 optional also used as mode pin +#define LED_PIN 13 +#define FAN_PIN 7 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define SOL1_PIN 16 +#define SOL2_PIN 17 + +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 // 12 +#define HEATER_2_PIN 11 //-1 // 13 +#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN 15 // 1 +#define TEMP_2_PIN -1 // 2 +#define HEATER_BED_PIN 10 // 14/15 +#define TEMP_BED_PIN 14 // 1,2 or I2C +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ + + +#endif + /**************************************************************************************** * * From b5417be1096feca9af4f8564bca8b81ceb06c21f Mon Sep 17 00:00:00 2001 From: bonm014 <mkdebont@zonnet.nl> Date: Thu, 3 Jul 2014 21:03:22 +0200 Subject: [PATCH 2/3] Update Configuration.h Leapfrog added to the board list --- Marlin/Configuration.h | 1 + 1 file changed, 1 insertion(+) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 46d6b96dd1..7f228b55c2 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -72,6 +72,7 @@ // 301= Rambo // 21 = Elefu Ra Board (v3) // 88 = 5DPrint D8 Driver Board +// 999 = Leapfrog #ifndef MOTHERBOARD #define MOTHERBOARD 7 From 32a6451ad8b9fe5c7d7f963b9883ef0584843c39 Mon Sep 17 00:00:00 2001 From: bonm014 <mkdebont@zonnet.nl> Date: Thu, 3 Jul 2014 21:15:03 +0200 Subject: [PATCH 3/3] Add leapfrog and dual Y/Z I have added the pin set for the leapfrog and the support of dual Y and Z --- Marlin/pins.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Marlin/pins.h b/Marlin/pins.h index 19432aaeee..3216380006 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -137,6 +137,10 @@ #define Y2_DIR_PIN 40 #define Y2_ENABLE_PIN 36 +#define Z2_STEP_PIN 37 +#define Z2_DIR_PIN 40 +#define Z2_ENABLE_PIN 36 + #define SDPOWER -1 #define SDSS 11 #define SDCARDDETECT -1 // 10 optional also used as mode pin