From a5212bf277a4b880a3f90974ff79ff4351cc42c0 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sun, 24 Jul 2016 13:36:00 -0700
Subject: [PATCH 1/2] Sanity check for too many temp sensors
---
Marlin/SanityCheck.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index 5eea066a6f..299a7cc761 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -564,8 +564,20 @@
#elif !PIN_EXISTS(TEMP_3)
#error "TEMP_3_PIN not defined for this board."
#endif
+ #elif TEMP_SENSOR_3 != 0
+ #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders."
#endif
+ #elif TEMP_SENSOR_2 != 0
+ #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders."
+ #elif TEMP_SENSOR_3 != 0
+ #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders."
#endif
+#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+ #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder."
+#elif TEMP_SENSOR_2 != 0
+ #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder."
+#elif TEMP_SENSOR_3 != 0
+ #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder."
#endif
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
From bedda3be61c2033dab7a055c154ca281f0815120 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sun, 24 Jul 2016 15:24:40 -0700
Subject: [PATCH 2/2] Patch generic delta error caught by sanity check
---
Marlin/example_configurations/delta/generic/Configuration.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index cb84cb96c6..e257309522 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -239,7 +239,7 @@
//#define DUMMY_THERMISTOR_999_VALUE 100
// :{ '0': "Not used",'1':"100k / 4.7k - EPCOS",'2':"200k / 4.7k - ATC Semitec 204GT-2",'3':"Mendel-parts / 4.7k",'4':"10k !! do not use for a hotend. Bad resolution at high temp. !!",'5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)",'6':"100k / 4.7k EPCOS - Not as accurate as Table 1",'7':"100k / 4.7k Honeywell 135-104LAG-J01",'8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT",'9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1",'10':"100k / 4.7k RS 198-961",'11':"100k / 4.7k beta 3950 1%",'12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)",'13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'",'20':"PT100 (Ultimainboard V2.x)",'51':"100k / 1k - EPCOS",'52':"200k / 1k - ATC Semitec 204GT-2",'55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)",'60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950",'66':"Dyze Design 4.7M High Temperature thermistor",'70':"the 100K thermistor found in the bq Hephestos 2",'71':"100k / 4.7k Honeywell 135-104LAF-J01",'147':"Pt100 / 4.7k",'1047':"Pt1000 / 4.7k",'110':"Pt100 / 1k (non-standard)",'1010':"Pt1000 / 1k (non standard)",'-3':"Thermocouple + MAX31855 (only for sensor 0)",'-2':"Thermocouple + MAX6675 (only for sensor 0)",'-1':"Thermocouple + AD595",'998':"Dummy 1",'999':"Dummy 2" }
#define TEMP_SENSOR_0 -1
-#define TEMP_SENSOR_1 -1
+#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0