diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 950b58a172..62ab3c68da 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -41,11 +41,16 @@ #define MSG_SD_INSERTED _UxGT("Karta vlozena") #define MSG_SD_REMOVED _UxGT("Karta vyjmuta") #define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy") #define MSG_MAIN _UxGT("Hlavni nabidka") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") #define MSG_DEBUG_MENU _UxGT("Nabidka ladeni") -#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk.prubehu") +#if LCD_WIDTH >= 20 + #define MSG_PROGRESS_BAR_TEST _UxGT("Test ukaz. prubehu") +#else + #define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. prubehu") +#endif #define MSG_AUTO_HOME _UxGT("Domovska pozice") #define MSG_AUTO_HOME_X _UxGT("Domu osa X") #define MSG_AUTO_HOME_Y _UxGT("Domu osa Y") @@ -91,7 +96,7 @@ #define MSG_UBL_BC_INSERT _UxGT("Vlozte kartu, zmerte") #define MSG_UBL_BC_INSERT2 _UxGT("Zmerte") #define MSG_UBL_BC_REMOVE _UxGT("Odstrante a zmerte") -#define MSG_UBL_MOVING_TO_NEXT _UxGT("Presoun na dalsi") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Presun na dalsi") #define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovat UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovat UBL") #define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podlozky") @@ -125,7 +130,7 @@ #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Exportovat do CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Zaloha do PC") #define MSG_UBL_INFO_UBL _UxGT("Info o UBL do PC") -#define MSG_UBL_EDIT_MESH_MENU _UxGT("Upravit sit dobu") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Upravit sit bodu") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Hustota mrizky") #define MSG_UBL_MANUAL_FILLIN _UxGT("Rucni hustota") #define MSG_UBL_SMART_FILLIN _UxGT("Chytra hustota") @@ -139,14 +144,14 @@ #define MSG_UBL_LOAD_MESH _UxGT("Nacist sit bodu") #define MSG_UBL_SAVE_MESH _UxGT("Ulozit sit bodu") #define MSG_MESH_LOADED _UxGT("Sit %i nactena") -#define MSG_NO_STORAGE _UxGT("Nedostatek mista") #define MSG_MESH_SAVED _UxGT("Sit %i ulozena") -#define MSG_UBL_SAVE_ERROR _UxGT("Err: Ulozit UBL") -#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") +#define MSG_NO_STORAGE _UxGT("Nedostatek mista") +#define MSG_UBL_SAVE_ERROR _UxGT("Ch.: Ulozit UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Ch.: Obnovit UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupne") -#define MSG_LED_CONTROL _UxGT("LED Nastaveni") +#define MSG_LED_CONTROL _UxGT("Nastaveni LED") #define MSG_LEDS _UxGT("Svetla") #define MSG_LED_PRESETS _UxGT("Svetla Predvolby") #define MSG_SET_LEDS_RED _UxGT("Cervena") @@ -206,6 +211,7 @@ #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_JUNCTION_DEVIATION _UxGT("Odchylka spoje") #define MSG_VELOCITY _UxGT("Rychlost") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") @@ -250,11 +256,13 @@ #define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") #define MSG_RESUME_PRINT _UxGT("Obnovit tisk") #define MSG_STOP_PRINT _UxGT("Zastavit tisk") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova vypadku") #define MSG_CARD_MENU _UxGT("Tisknout z SD") #define MSG_NO_CARD _UxGT("Zadna SD karta") #define MSG_DWELL _UxGT("Uspano...") #define MSG_USERWAIT _UxGT("Cekani na uziv...") #define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven") +#define MSG_PRINTING _UxGT("Tisknu...") #define MSG_PRINT_ABORTED _UxGT("Tisk zrusen") #define MSG_NO_MOVE _UxGT("Zadny pohyb.") #define MSG_KILLED _UxGT("PRERUSENO. ") @@ -290,8 +298,10 @@ #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahrivani") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahr.podl.") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") -#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNI SKOK") +#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNI UNIK") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("TEPL. UNIK PODL.") #define MSG_ERR_MAXTEMP _UxGT("VYSOKA TEPLOTA") #define MSG_ERR_MINTEMP _UxGT("NIZKA TEPLOTA") #define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") @@ -303,7 +313,17 @@ #define MSG_SHORT_HOUR _UxGT("h") #define MSG_SHORT_MINUTE _UxGT("m") #define MSG_HEATING _UxGT("Zahrivani...") -#define MSG_BED_HEATING _UxGT("Zahrivani podl...") +#define MSG_COOLING _UxGT("Chlazeni...") +#if LCD_WIDTH >= 20 + #define MSG_BED_HEATING _UxGT("Zahrivani podlozky") +#else + #define MSG_BED_HEATING _UxGT("Zahrivani podl.") +#endif +#if LCD_WIDTH >= 20 + #define MSG_BED_COOLING _UxGT("Chlazeni podlozky") +#else + #define MSG_BED_COOLING _UxGT("Chlazeni podl.") +#endif #define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") @@ -312,6 +332,7 @@ #define MSG_DELTA_SETTINGS _UxGT("Delta nastaveni") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.vysku delty") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Nast. Z-ofset") #define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") #define MSG_DELTA_HEIGHT _UxGT("Vyska") #define MSG_DELTA_RADIUS _UxGT("Polomer") @@ -364,36 +385,36 @@ #if LCD_HEIGHT >= 4 // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte prosim") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahajeni") - #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("vymeny filamentu") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Cekejte prosim") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") - #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stisknete") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlacitko...") - #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Kliknete pro") - #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahrati trysky") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Cekejte prosim") - #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahrati tr.") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni") - #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") - #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyckejte na") - #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlaceni") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani") - #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahajeni") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("vymeny filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stisknete") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlacitko...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Kliknete pro") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahrati trysky") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahrati tr.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyckejte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlaceni") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvani...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...") - #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlacovani...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvani...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlacovani...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_CZ_H diff --git a/Marlin/language_cz_utf8.h b/Marlin/language_cz_utf8.h index e76c947e48..e40a50aad3 100644 --- a/Marlin/language_cz_utf8.h +++ b/Marlin/language_cz_utf8.h @@ -49,7 +49,11 @@ #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") #define MSG_DEBUG_MENU _UxGT("Nabídka ladění") -#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. průběhu") +#if LCD_WIDTH >= 20 + #define MSG_PROGRESS_BAR_TEST _UxGT("Test ukaz. průběhu") +#else + #define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. průběhu") +#endif #define MSG_AUTO_HOME _UxGT("Domovská pozice") #define MSG_AUTO_HOME_X _UxGT("Domů osa X") #define MSG_AUTO_HOME_Y _UxGT("Domů osa Y") @@ -108,8 +112,8 @@ #define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastní síť") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodu PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodu ABS") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodů PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodů ABS") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") @@ -119,8 +123,8 @@ #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. sítě") #define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovat v síťi") #define MSG_UBL_MESH_LEVELING _UxGT("Síťové rovnání") -#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnání") -#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mrizkove rovnání") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodové rovnání") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mřížkové rovnání") #define MSG_UBL_MESH_LEVEL _UxGT("Srovnat podložku") #define MSG_UBL_SIDE_POINTS _UxGT("Postranní body") #define MSG_UBL_MAP_TYPE _UxGT("Typ sítě bodu") @@ -145,12 +149,12 @@ #define MSG_MESH_LOADED _UxGT("Síť %i načtena") #define MSG_MESH_SAVED _UxGT("Síť %i uložena") #define MSG_NO_STORAGE _UxGT("Nedostatek místa") -#define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložit UBL") -#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") +#define MSG_UBL_SAVE_ERROR _UxGT("Ch.: Uložit UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Ch.: Obnovit UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupně") -#define MSG_LED_CONTROL _UxGT("LED Nastavení") +#define MSG_LED_CONTROL _UxGT("Nastavení LED") #define MSG_LEDS _UxGT("Světla") #define MSG_LED_PRESETS _UxGT("Světla Předvolby") #define MSG_SET_LEDS_RED _UxGT("Červená") @@ -170,7 +174,7 @@ #define MSG_LED_BRIGHTNESS _UxGT("Jas") #define MSG_USER_MENU _UxGT("Vlastní příkazy") -#define MSG_MOVING _UxGT("Posouvani...") +#define MSG_MOVING _UxGT("Posouvání...") #define MSG_FREE_XY _UxGT("Uvolnit XY") #define MSG_MOVE_X _UxGT("Posunout X") #define MSG_MOVE_Y _UxGT("Posunout Y") @@ -210,6 +214,7 @@ #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_JUNCTION_DEVIATION _UxGT("Odchylka spoje") #define MSG_VELOCITY _UxGT("Rychlost") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") @@ -254,7 +259,7 @@ #define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") #define MSG_RESUME_PRINT _UxGT("Obnovit tisk") #define MSG_STOP_PRINT _UxGT("Zastavit tisk") -#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova vypadku") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova výpadku") #define MSG_CARD_MENU _UxGT("Tisknout z SD") #define MSG_NO_CARD _UxGT("Žádná SD karta") #define MSG_DWELL _UxGT("Uspáno...") @@ -296,10 +301,10 @@ #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání") -#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř. podl.") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř.podl.") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") -#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ SKOK") -#define MSG_THERMAL_RUNAWAY_BED _UxGT("PODL. TEPL. SKOK") +#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ ÚNIK") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("TEPL. ÚNIK PODL.") #define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA") #define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA") #define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") @@ -311,9 +316,17 @@ #define MSG_SHORT_HOUR _UxGT("h") #define MSG_SHORT_MINUTE _UxGT("m") #define MSG_HEATING _UxGT("Zahřívání...") -#define MSG_COOLING _UxGT("Chlazení") -#define MSG_BED_HEATING _UxGT("Zahřívání podl...") -#define MSG_BED_COOLING _UxGT("Chlazení podl...") +#define MSG_COOLING _UxGT("Chlazení...") +#if LCD_WIDTH >= 20 + #define MSG_BED_HEATING _UxGT("Zahřívání podložky") +#else + #define MSG_BED_HEATING _UxGT("Zahřívání podl.") +#endif +#if LCD_WIDTH >= 20 + #define MSG_BED_COOLING _UxGT("Chlazení podložky") +#else + #define MSG_BED_COOLING _UxGT("Chlazení podl.") +#endif #define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") @@ -375,36 +388,36 @@ #if LCD_HEIGHT >= 4 // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení") - #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") - #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...") - #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro") - #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím") - #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení") - #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") - #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na") - #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování") - #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...") - #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_CZ_UTF_H