diff --git a/Marlin/language_it.h b/Marlin/language_it.h
index d529e58718..80d64132ea 100644
--- a/Marlin/language_it.h
+++ b/Marlin/language_it.h
@@ -75,6 +75,8 @@
#define MSG_MOVE_AXIS _UxGT("Muovi Asse")
#define MSG_BED_LEVELING _UxGT("Livella piano")
#define MSG_LEVEL_BED _UxGT("Livella piano")
+#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli")
+#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo")
#define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata")
#define MSG_USER_MENU _UxGT("Comandi Utente")
@@ -85,7 +87,7 @@
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
#define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura")
#define MSG_UBL_BC_INSERT2 _UxGT("Misura")
-#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi & misura piatto")
+#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi e misura piatto")
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
@@ -93,6 +95,7 @@
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
+#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
@@ -132,11 +135,34 @@
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria")
#define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto")
#define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto")
+#define MSG_MESH_LOADED _UxGT("Mesh %i caricata")
+#define MSG_MESH_SAVED _UxGT("Mesh %i salvata")
+#define MSG_NO_STORAGE _UxGT("Nessuna memoria")
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo")
+#define MSG_LED_CONTROL _UxGT("Controllo LED")
+#define MSG_LEDS_ON _UxGT("Luci On")
+#define MSG_LEDS_OFF _UxGT("Luci Off")
+#define MSG_LED_PRESETS _UxGT("Preset luci")
+#define MSG_SET_LEDS_RED _UxGT("Rosso")
+#define MSG_SET_LEDS_ORANGE _UxGT("Arancione")
+#define MSG_SET_LEDS_YELLOW _UxGT("Giallo")
+#define MSG_SET_LEDS_GREEN _UxGT("Verde")
+#define MSG_SET_LEDS_BLUE _UxGT("Blu")
+#define MSG_SET_LEDS_INDIGO _UxGT("Indaco")
+#define MSG_SET_LEDS_VIOLET _UxGT("Viola")
+#define MSG_SET_LEDS_WHITE _UxGT("Bianco")
+#define MSG_SET_LEDS_DEFAULT _UxGT("Predefinito")
+#define MSG_CUSTOM_LEDS _UxGT("Luci personalizzate")
+#define MSG_INTENSITY_R _UxGT("Intensita rosso")
+#define MSG_INTENSITY_G _UxGT("Intensita verde")
+#define MSG_INTENSITY_B _UxGT("Intensita blu")
+#define MSG_INTENSITY_W _UxGT("Intensita bianco")
+#define MSG_LED_BRIGHTNESS _UxGT("Luminosita")
+
#define MSG_MOVING _UxGT("In movimento...")
#define MSG_FREE_XY _UxGT("XY liberi")
#define MSG_MOVE_X _UxGT("Muovi X")
@@ -150,7 +176,8 @@
#define MSG_BED_Z _UxGT("piatto Z")
#define MSG_NOZZLE _UxGT("Ugello")
#define MSG_BED _UxGT("Piatto")
-#define MSG_FAN_SPEED _UxGT("Velocità ventola")
+#define MSG_FAN_SPEED _UxGT("Velocita ventola")
+#define MSG_EXTRA_FAN_SPEED _UxGT("Magg vel ventola")
#define MSG_FLOW _UxGT("Flusso")
#define MSG_CONTROL _UxGT("Controllo")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
@@ -205,6 +232,8 @@
#define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
+#define MSG_FILAMENT_UNLOAD _UxGT("Rimuovi mm")
+#define MSG_FILAMENT_LOAD _UxGT("Carica mm")
#define MSG_ADVANCE_K _UxGT("K Avanzamento")
#define MSG_CONTRAST _UxGT("Contrasto LCD")
#define MSG_STORE_EEPROM _UxGT("Salva in memoria")
@@ -235,11 +264,16 @@
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRitrai")
#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento")
+#define MSG_FILAMENTLOAD _UxGT("Carica filamento")
+#define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento")
+#define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto")
#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card")
#define MSG_CNG_SDCARD _UxGT("Cambia SD-Card")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
+#define MSG_SKEW_FACTOR _UxGT("Fattore distorsione")
#define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
@@ -274,8 +308,12 @@
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center")
+#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta")
+#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale")
+#define MSG_DELTA_HEIGHT _UxGT("Altezza")
+#define MSG_DELTA_RADIUS _UxGT("Raggio")
#define MSG_INFO_MENU _UxGT("Riguardo stampante")
#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante")
#define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti")
@@ -314,9 +352,15 @@
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA")
+#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO")
+#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:")
+#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
+#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito")
+#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito")
+#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
@@ -336,6 +380,9 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attendere")
+ #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("lo spurgo")
+ #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
@@ -344,8 +391,10 @@
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
+ #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Riscalda ugello")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
#endif // LCD_HEIGHT < 4