diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index 020073ddd0..3ddd48be6e 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -328,17 +328,17 @@
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS"
#if LCD_WIDTH > 19
-#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
-#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
-#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"
-#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"
-#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"
+ #define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
+ #define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
+ #define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"
+ #define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"
+ #define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"
#else
-#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"
-#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
-#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"
-#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"
-#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"
+ #define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"
+ #define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
+ #define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"
+ #define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"
+ #define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"
#endif
#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp"
@@ -359,33 +359,32 @@
#define MSG_M600_TOO_COLD _UxGT("M600: 太凉") // "M600: Too cold"
#if LCD_HEIGHT >= 4
-#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"
-#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"
-#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"
-#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
-#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"
-#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"
-#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"
-#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."
-#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to"
-#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle."
-#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle"
-#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..."
-#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
-#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
-#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
-#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge"
-#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
-#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
-
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"
+ #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"
+ #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
+ #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"
+ #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"
+ #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."
+ #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to"
+ #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle."
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle"
+ #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..."
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
+ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
+ #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge"
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
+ #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
#else // LCD_HEIGHT < 4
-#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."
-#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
-#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
-#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..."
-#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
-#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
-#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..."
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_ZH_CN_H
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index 8500a4f9a8..60e1661cf0 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -328,17 +328,17 @@
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("燈亮度") // "Light BRIGHTNESS"
#if LCD_WIDTH > 19
-#define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count"
-#define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed"
-#define MSG_INFO_PRINT_TIME _UxGT("總列印時間") //"Total print time"
-#define MSG_INFO_PRINT_LONGEST _UxGT("最長工作時間") //"Longest job time"
-#define MSG_INFO_PRINT_FILAMENT _UxGT("總計擠出") //"Extruded total"
+ #define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count"
+ #define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed"
+ #define MSG_INFO_PRINT_TIME _UxGT("總列印時間") //"Total print time"
+ #define MSG_INFO_PRINT_LONGEST _UxGT("最長工作時間") //"Longest job time"
+ #define MSG_INFO_PRINT_FILAMENT _UxGT("總計擠出") //"Extruded total"
#else
-#define MSG_INFO_PRINT_COUNT _UxGT("列印數") //"Prints"
-#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
-#define MSG_INFO_PRINT_TIME _UxGT("總共") //"Total"
-#define MSG_INFO_PRINT_LONGEST _UxGT("最長") //"Longest"
-#define MSG_INFO_PRINT_FILAMENT _UxGT("已擠出") //"Extruded"
+ #define MSG_INFO_PRINT_COUNT _UxGT("列印數") //"Prints"
+ #define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
+ #define MSG_INFO_PRINT_TIME _UxGT("總共") //"Total"
+ #define MSG_INFO_PRINT_LONGEST _UxGT("最長") //"Longest"
+ #define MSG_INFO_PRINT_FILAMENT _UxGT("已擠出") //"Extruded"
#endif
#define MSG_INFO_MIN_TEMP _UxGT("最低溫度") //"Min Temp"
@@ -359,33 +359,32 @@
#define MSG_M600_TOO_COLD _UxGT("M600: 太涼") // "M600: Too cold"
#if LCD_HEIGHT >= 4
-#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待開始") //"Wait for start"
-#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("絲料") //"of the filament"
-#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("變更") //"change"
-#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
-#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下絲料") //"filament unload"
-#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入絲料") //"Insert filament"
-#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("並按鍵") //"and press button"
-#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("繼續 ...") //"to continue..."
-#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按鈕來") // "Press button to"
-#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加熱噴嘴.") // "heat nozzle."
-#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱噴嘴") // "Heating nozzle"
-#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("請等待 ...") // "Please wait..."
-#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
-#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load"
-#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
-#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("絲料清除") // "filament purge"
-#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print"
-#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume"
-
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待開始") //"Wait for start"
+ #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("絲料") //"of the filament"
+ #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("變更") //"change"
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
+ #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下絲料") //"filament unload"
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入絲料") //"Insert filament"
+ #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("並按鍵") //"and press button"
+ #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("繼續 ...") //"to continue..."
+ #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按鈕來") // "Press button to"
+ #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加熱噴嘴.") // "heat nozzle."
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱噴嘴") // "Heating nozzle"
+ #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("請等待 ...") // "Please wait..."
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
+ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load"
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
+ #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("絲料清除") // "filament purge"
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print"
+ #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume"
#else // LCD_HEIGHT < 4
-#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("請等待 ...") //"Please wait..."
-#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
-#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click"
-#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱中 ...") // "Heating..."
-#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..."
-#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
-#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..."
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("請等待 ...") //"Please wait..."
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click"
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱中 ...") // "Heating..."
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..."
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_ZH_TW_H