From 3f56bd91d2b4486507a37d5c2322d5379f297dde Mon Sep 17 00:00:00 2001
From: geigerg <mail@geigerg.de>
Date: Mon, 26 Feb 2018 22:44:24 +0100
Subject: [PATCH] Add files via upload (#9827)
---
Marlin/language_de.h | 58 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 8 deletions(-)
diff --git a/Marlin/language_de.h b/Marlin/language_de.h
index 98d9425e18..4605eef90a 100644
--- a/Marlin/language_de.h
+++ b/Marlin/language_de.h
@@ -44,13 +44,13 @@
#define MSG_MAIN _UxGT("Hauptmenü")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
-#define MSG_DEBUG_MENU _UxGT("Debug Menu")
+#define MSG_DEBUG_MENU _UxGT("Debug Menü")
#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittsb. Test")
#define MSG_AUTO_HOME _UxGT("Home") // G28
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
-#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
+#define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
#define MSG_LEVEL_BED_DONE _UxGT("Fertig")
@@ -96,6 +96,7 @@
#define MSG_NOZZLE _UxGT("Düse")
#define MSG_BED _UxGT("Bett")
#define MSG_FAN_SPEED _UxGT("Lüfter")
+#define MSG_EXTRA_FAN_SPEED _UxGT("Extra Lüfter")
#define MSG_FLOW _UxGT("Flussrate")
#define MSG_CONTROL _UxGT("Einstellungen")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
@@ -150,6 +151,8 @@
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM _UxGT("D Fil.")
+#define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm")
+#define MSG_FILAMENT_LOAD _UxGT("Laden mm")
#define MSG_ADVANCE_K _UxGT("Advance Faktor")
#define MSG_CONTRAST _UxGT("LCD Kontrast")
#define MSG_STORE_EEPROM _UxGT("Konfig. speichern")
@@ -180,11 +183,16 @@
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("Autom. Retract")
#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
+#define MSG_FILAMENTLOAD _UxGT("Filament laden")
+#define MSG_FILAMENTUNLOAD _UxGT("Filament entladen")
+#define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen")
#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")
+#define MSG_SKEW_FACTOR _UxGT("Skew Faktor")
#define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
@@ -200,6 +208,7 @@
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
+#define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
@@ -222,7 +231,9 @@
#define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen")
-
+#define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod")
+#define MSG_DELTA_HEIGHT _UxGT("Höhe")
+#define MSG_DELTA_RADIUS _UxGT("Radius")
#define MSG_INFO_MENU _UxGT("Über den Drucker")
#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")
#define MSG_3POINT_LEVELING _UxGT("3-Punkt Nivellierung")
@@ -241,7 +252,7 @@
#define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!")
#define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen")
-#define MSG_UBL_TOOLS _UxGT("UBL Tools")
+#define MSG_UBL_TOOLS _UxGT("UBL Werkzeuge")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")
@@ -264,7 +275,7 @@
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.")
-#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
+#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")
@@ -294,11 +305,34 @@
#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
#define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden")
#define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern")
+#define MSG_MESH_LOADED _UxGT("Netz %i geladen")
+#define MSG_MESH_SAVED _UxGT("Netz %i gespeichert")
+#define MSG_NO_STORAGE _UxGT("Kein Speicher")
#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")
#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL")
+#define MSG_LED_CONTROL _UxGT("LED Kontrolle")
+#define MSG_LEDS_ON _UxGT("Licht an")
+#define MSG_LEDS_OFF _UxGT("Licht aus")
+#define MSG_LED_PRESETS _UxGT("Licht Einstellungen")
+#define MSG_SET_LEDS_RED _UxGT("Rot")
+#define MSG_SET_LEDS_ORANGE _UxGT("Orange")
+#define MSG_SET_LEDS_YELLOW _UxGT("Gelb")
+#define MSG_SET_LEDS_GREEN _UxGT("Grün")
+#define MSG_SET_LEDS_BLUE _UxGT("Blau")
+#define MSG_SET_LEDS_INDIGO _UxGT("Indigo")
+#define MSG_SET_LEDS_VIOLET _UxGT("Violett")
+#define MSG_SET_LEDS_WHITE _UxGT("Weiß")
+#define MSG_SET_LEDS_DEFAULT _UxGT("Standard")
+#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.")
+#define MSG_INTENSITY_R _UxGT("Intensität Rot")
+#define MSG_INTENSITY_G _UxGT("Intensität Grün")
+#define MSG_INTENSITY_B _UxGT("Intensität Blau")
+#define MSG_INTENSITY_W _UxGT("Intensität Weiß")
+#define MSG_LED_BRIGHTNESS _UxGT("Helligkeit")
+
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")
@@ -315,17 +349,21 @@
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
-#define MSG_INFO_PSU _UxGT("Stromversorgung")
+#define MSG_INFO_PSU _UxGT("Netzteil")
#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")
#define MSG_DAC_PERCENT _UxGT("Treiber %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
-
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")
+#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN")
+#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("FILAMENT ENTLADEN")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")
+#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entleeren")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
-
+#define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert")
+#define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert")
+#define MSG_M600_TOO_COLD _UxGT("M600: Zu kalt")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
@@ -344,6 +382,9 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf")
+ #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entleeren des")
+ #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...")
@@ -354,6 +395,7 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entleeren...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
#endif // LCD_HEIGHT < 4