diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 97d5b44b28..ef6c3ff52e 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -577,6 +577,7 @@
*/
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 7ee3ed3879..a894c63aac 100755
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2067,10 +2067,11 @@ static void clean_up_after_endstop_or_probe_move() {
//
// The BL-Touch probes have a HAL effect sensor. The high currents switching
- // on and off cause big magnetic fields that can affect the reliability of the
+ // on and off cause big magnetic fields that can affect the repeatability of the
// sensor. So, for BL-Touch probes, we turn off the heaters during the actual probe.
// And then we quickly turn them back on after we have sampled the point
//
+ #if ENABLED(BLTOUCH_HEATERS_OFF)
void turn_heaters_on_or_off_for_bltouch(const bool deploy) {
static int8_t bltouch_recursion_cnt=0;
static millis_t last_emi_protection=0;
@@ -2105,9 +2106,12 @@ static void clean_up_after_endstop_or_probe_move() {
}
}
}
+ #endif
void set_bltouch_deployed(const bool deploy) {
+ #if ENABLED(BLTOUCH_HEATERS_OFF)
turn_heaters_on_or_off_for_bltouch(deploy);
+ #endif
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
bltouch_command(BLTOUCH_RESET); // try to reset it.
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
@@ -2143,7 +2147,9 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
#if ENABLED(BLTOUCH)
+ #if ENABLED(BLTOUCH_HEATERS_OFF)
turn_heaters_on_or_off_for_bltouch(deploy);
+ #endif
#endif
if (endstops.z_probe_enabled == deploy) return false;
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 363f38c4a3..54bc667cc6 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -575,7 +575,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index b252f6abd7..e9eb6c8845 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -559,7 +559,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index b2c8aa78f8..b64969d5f9 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -559,7 +559,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
index edc4bc320b..105592b68f 100644
--- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
@@ -579,7 +579,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index bee7a1a425..43b66aa16a 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -567,7 +567,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 1e7544e406..76db2d1dc7 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -570,7 +570,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 1dfe9a9e8b..e52e7509c9 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -605,7 +605,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index 8707c3ca9d..c015a797d3 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -576,7 +576,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index a92a5e921f..b8333c67b6 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -576,7 +576,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 83beeb4d77..54371f08f9 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -576,7 +576,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 56eb3408fd..06bd769040 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -575,7 +575,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 4115db2734..feababc9cf 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -591,7 +591,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 4955dab12d..297a6e4569 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -596,7 +596,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index 3755702929..ebc5974747 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -627,7 +627,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 4eec6b5037..1ffa26723c 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -567,7 +567,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 7498087fb1..faa4f367b1 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -576,7 +576,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index aee1c8de53..5e1f3facc6 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -650,7 +650,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 3f572c158c..1c468198d0 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -651,7 +651,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 55662e03d2..3cdda90028 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -640,7 +640,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 2cbe82a98a..c5f5c5c07b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -633,7 +633,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 862db686df..256f3a9ddf 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -634,7 +634,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index d953a10574..fd09b22098 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -653,7 +653,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
index 71e75d3056..2fcd20debe 100644
--- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
@@ -590,7 +590,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
#define BLTOUCH
-#define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
+#define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
+#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index b997ae09cb..fae782350b 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -579,7 +579,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index bcca9b24a9..093cb37ff8 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -572,7 +572,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index 33a98fc8fe..324f3678e0 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -581,7 +581,8 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR.
*/
//#define BLTOUCH
-//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/**
* BLTouch WARNING - ONLY APPLIES TO VERSIONS OF MARLIN BEFORE 15 FEB 2017