diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 6f71b855d9..daea78c1e8 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -37,6 +37,7 @@
// 64 = STB V1.1
// 7 = Ultimaker
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+// 77 = 3Drag Controller
// 8 = Teensylu
// 80 = Rumba
// 81 = Printrboard (AT90USB1286)
diff --git a/Marlin/language.h b/Marlin/language.h
index dcc4112fa8..796e17797b 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -29,6 +29,9 @@
#elif MOTHERBOARD == 80
#define MACHINE_NAME "Rumba"
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
+#elif MOTHERBOARD == 77
+ #define MACHINE_NAME "3Drag"
+ #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
#else
#ifdef CUSTOM_MENDEL_NAME
#define MACHINE_NAME CUSTOM_MENDEL_NAME
@@ -1004,7 +1007,7 @@
#if LANGUAGE_CHOICE == 7
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Pronto."
+ #define WELCOME_MSG MACHINE_NAME " Pronta"
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_MAIN "Menu principale"
@@ -1016,7 +1019,7 @@
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
#define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
- #define MSG_COOLDOWN "Rafredda"
+ #define MSG_COOLDOWN "Raffredda"
#define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse"
diff --git a/Marlin/pins.h b/Marlin/pins.h
index 58684c4413..ee0e3db61f 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -298,7 +298,7 @@
* Arduino Mega pin assignment
*
****************************************************************************************/
-#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
+#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
#define KNOWN_BOARD 1
//////////////////FIX THIS//////////////
@@ -308,47 +308,89 @@
#endif
#endif
+
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
// #define RAMPS_V_1_3
// #define RAMPS_V_1_0
-#if MOTHERBOARD == 33 || MOTHERBOARD == 34
- #define LARGE_FLASH true
+#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
- #define X_STEP_PIN 54
- #define X_DIR_PIN 55
- #define X_ENABLE_PIN 38
- #define X_MIN_PIN 3
- #define X_MAX_PIN 2
+ #define LARGE_FLASH true
+
+ #if MOTHERBOARD == 77
+ #define X_STEP_PIN 54
+ #define X_DIR_PIN 55
+ #define X_ENABLE_PIN 38
+ #define X_MIN_PIN 3
+ #define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
- #define Y_STEP_PIN 60
- #define Y_DIR_PIN 61
- #define Y_ENABLE_PIN 56
- #define Y_MIN_PIN 14
- #define Y_MAX_PIN 15
+ #define Y_STEP_PIN 60
+ #define Y_DIR_PIN 61
+ #define Y_ENABLE_PIN 56
+ #define Y_MIN_PIN 14
+ #define Y_MAX_PIN -1 //15
- #define Z_STEP_PIN 46
- #define Z_DIR_PIN 48
- #define Z_ENABLE_PIN 62
- #define Z_MIN_PIN 18
- #define Z_MAX_PIN 19
+ #define Z_STEP_PIN 46
+ #define Z_DIR_PIN 48
+ #define Z_ENABLE_PIN 63
+ #define Z_MIN_PIN 18
+ #define Z_MAX_PIN -1
- #define Z2_STEP_PIN 36
- #define Z2_DIR_PIN 34
- #define Z2_ENABLE_PIN 30
+ #define Z2_STEP_PIN 36
+ #define Z2_DIR_PIN 34
+ #define Z2_ENABLE_PIN 30
- #define E0_STEP_PIN 26
- #define E0_DIR_PIN 28
- #define E0_ENABLE_PIN 24
+ #define E0_STEP_PIN 26
+ #define E0_DIR_PIN 28
+ #define E0_ENABLE_PIN 24
- #define E1_STEP_PIN 36
- #define E1_DIR_PIN 34
- #define E1_ENABLE_PIN 30
+ #define E1_STEP_PIN 36
+ #define E1_DIR_PIN 34
+ #define E1_ENABLE_PIN 30
- #define SDPOWER -1
- #define SDSS 53
- #define LED_PIN 13
+ #define SDPOWER -1
+ #define SDSS 25//53
+ #define LED_PIN 13
+
+ #define BEEPER 33
+
+ #else
+
+ #define X_STEP_PIN 54
+ #define X_DIR_PIN 55
+ #define X_ENABLE_PIN 38
+ #define X_MIN_PIN 3
+ #define X_MAX_PIN 2
+
+ #define Y_STEP_PIN 60
+ #define Y_DIR_PIN 61
+ #define Y_ENABLE_PIN 56
+ #define Y_MIN_PIN 14
+ #define Y_MAX_PIN 15
+
+ #define Z_STEP_PIN 46
+ #define Z_DIR_PIN 48
+ #define Z_ENABLE_PIN 62
+ #define Z_MIN_PIN 18
+ #define Z_MAX_PIN 19
+
+ #define Z2_STEP_PIN 36
+ #define Z2_DIR_PIN 34
+ #define Z2_ENABLE_PIN 30
+
+ #define E0_STEP_PIN 26
+ #define E0_DIR_PIN 28
+ #define E0_ENABLE_PIN 24
+
+ #define E1_STEP_PIN 36
+ #define E1_DIR_PIN 34
+ #define E1_ENABLE_PIN 30
+
+ #define SDPOWER -1
+ #define SDSS 53
+ #define LED_PIN 13
+ #endif
#if MOTHERBOARD == 33
#define FAN_PIN 9 // (Sprinter config)
@@ -356,6 +398,10 @@
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
+ #if MOTHERBOARD == 77
+ #define FAN_PIN 8
+ #endif
+
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
@@ -365,18 +411,27 @@
#endif
#define HEATER_0_PIN 10 // EXTRUDER 1
-
- #if MOTHERBOARD == 33
+ #if MOTHERBOARD == 33
#define HEATER_1_PIN -1
#else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif
+ #define HEATER_2_PIN -1
+
+ #if MOTHERBOARD == 77
+ #define HEATER_0_PIN 10
+ #define HEATER_1_PIN 12
+ #define HEATER_2_PIN 6
+ #endif
- #define HEATER_2_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
- #define HEATER_BED_PIN 8 // BED
+ #if MOTHERBOARD == 77
+ #define HEATER_BED_PIN 9 // BED
+ #else
+ #define HEATER_BED_PIN 8 // BED
+ #endif
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
@@ -403,7 +458,7 @@
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
- #define LCD_PINS_D5 25
+ #define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
@@ -440,22 +495,23 @@
#endif
#endif
+
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
- #define BEEPER 33 // No Beeper added
+ #define BEEPER 33 //No Beeper added
//buttons are attached to a shift register
- // Not wired this yet
+ // Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
-
- #define LCD_PINS_RS 16
+
+ #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
- #define LCD_PINS_D5 25
+ #define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
@@ -463,57 +519,56 @@
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default (MOTHERBOARD == 3)
- #define X_STEP_PIN 26
- #define X_DIR_PIN 28
- #define X_ENABLE_PIN 24
- #define X_MIN_PIN 3
- #define X_MAX_PIN -1 //2
+#define X_STEP_PIN 26
+#define X_DIR_PIN 28
+#define X_ENABLE_PIN 24
+#define X_MIN_PIN 3
+#define X_MAX_PIN -1 //2
- #define Y_STEP_PIN 38
- #define Y_DIR_PIN 40
- #define Y_ENABLE_PIN 36
- #define Y_MIN_PIN 16
- #define Y_MAX_PIN -1 //17
+#define Y_STEP_PIN 38
+#define Y_DIR_PIN 40
+#define Y_ENABLE_PIN 36
+#define Y_MIN_PIN 16
+#define Y_MAX_PIN -1 //17
- #define Z_STEP_PIN 44
- #define Z_DIR_PIN 46
- #define Z_ENABLE_PIN 42
- #define Z_MIN_PIN 18
- #define Z_MAX_PIN -1 //19
+#define Z_STEP_PIN 44
+#define Z_DIR_PIN 46
+#define Z_ENABLE_PIN 42
+#define Z_MIN_PIN 18
+#define Z_MAX_PIN -1 //19
- #define E0_STEP_PIN 32
- #define E0_DIR_PIN 34
- #define E0_ENABLE_PIN 30
+#define E0_STEP_PIN 32
+#define E0_DIR_PIN 34
+#define E0_ENABLE_PIN 30
- #define SDPOWER 48
- #define SDSS 53
- #define LED_PIN 13
- #define PS_ON_PIN -1
- #define KILL_PIN -1
+#define SDPOWER 48
+#define SDSS 53
+#define LED_PIN 13
+#define PS_ON_PIN -1
+#define KILL_PIN -1
- #ifdef RAMPS_V_1_0 // RAMPS_V_1_0
- #define HEATER_0_PIN 12 // RAMPS 1.0
- #define HEATER_BED_PIN -1 // RAMPS 1.0
- #define FAN_PIN 11 // RAMPS 1.0
- #else // RAMPS_V_1_1 or RAMPS_V_1_2
- #define HEATER_0_PIN 10 // RAMPS 1.1
- #define HEATER_BED_PIN 8 // RAMPS 1.1
- #define FAN_PIN 9 // RAMPS 1.1
- #endif
+#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
+ #define HEATER_0_PIN 12 // RAMPS 1.0
+ #define HEATER_BED_PIN -1 // RAMPS 1.0
+ #define FAN_PIN 11 // RAMPS 1.0
+#else // RAMPS_V_1_1 or RAMPS_V_1_2
+ #define HEATER_0_PIN 10 // RAMPS 1.1
+ #define HEATER_BED_PIN 8 // RAMPS 1.1
+ #define FAN_PIN 9 // RAMPS 1.1
+#endif
+#define HEATER_1_PIN -1
+#define HEATER_2_PIN -1
+#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+#define TEMP_1_PIN -1
+#define TEMP_2_PIN -1
+#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
- #define HEATER_1_PIN -1
- #define HEATER_2_PIN -1
- #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
- #define TEMP_1_PIN -1
- #define TEMP_2_PIN -1
- #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+#endif // MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
-#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34
-
-// SPI for Max6675 Thermocouple
+// SPI for Max6675 Thermocouple
#ifndef SDSUPPORT
-// these pins are defined in the SD library if building with SD support
+// these pins are defined in the SD library if building with SD support
#define MAX_SCK_PIN 52
#define MAX_MISO_PIN 50
#define MAX_MOSI_PIN 51
@@ -522,7 +577,9 @@
#define MAX6675_SS 49
#endif
-#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
+#endif //MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77
+
+
/****************************************************************************************
* Duemilanove w/ ATMega328P pin assignment