diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
index 12d487b35b..54e05a1c41 100644
--- a/Marlin/src/lcd/language/language_es.h
+++ b/Marlin/src/lcd/language/language_es.h
@@ -29,15 +29,14 @@
*
*/
-#define DISPLAY_CHARSET_ISO10646_1
-
namespace Language_es {
using namespace Language_en; // Inherit undefined strings from English
constexpr uint8_t CHARSIZE = 2;
PROGMEM Language_Str LANGUAGE = _UxGT("Spanish");
- PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" lista");
+ PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" Lista");
+ PROGMEM Language_Str MSG_MARLIN = _UxGT("Marlin");
PROGMEM Language_Str MSG_YES = _UxGT("SI");
PROGMEM Language_Str MSG_NO = _UxGT("NO");
PROGMEM Language_Str MSG_BACK = _UxGT("Atrás");
@@ -87,6 +86,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Precalentar ") PREHEAT_2_LABEL _UxGT(" Ajuste");
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("Precalen. Personali.");
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Enfriar");
+ PROGMEM Language_Str MSG_CUTTER_FREQUENCY = _UxGT("Frecuencia");
PROGMEM Language_Str MSG_LASER_MENU = _UxGT("Control Láser");
PROGMEM Language_Str MSG_LASER_OFF = _UxGT("Láser Apagado");
PROGMEM Language_Str MSG_LASER_ON = _UxGT("Láser Encendido");
@@ -137,9 +137,9 @@ namespace Language_es {
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("Activar UBL");
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("Desactivar UBL");
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("Temp. Cama");
- PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Bed Temp");
- PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT ("Hotend Temp");
- PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Hotend Temp");
+ PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Temp. Cama");
+ PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("Temp. Fusor");
+ PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Temp. Fusor");
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("Editar Mallado");
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("Edit. Mallado perso.");
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("Ajuste fino Mallado");
@@ -172,7 +172,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("Salida Mapa mallado");
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("Salida para el host");
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("Salida para CSV");
- PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Off Printer Backup");
+ PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Cópia de seg. ext");
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("Salida Info. UBL");
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("Cantidad de relleno");
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("Relleno manual");
@@ -186,8 +186,8 @@ namespace Language_es {
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Huecos de memoria");
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Cargar Mallado cama");
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Guardar Mallado cama");
- PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 Mallado %i Cargado");
- PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 Mallado %i Guardado");
+ PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 Mall. %i Carga.");
+ PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 Mall. %i Guard.");
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("Sin guardar");
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Error: Guardar UBL");
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Error: Restaurar UBL");
@@ -195,12 +195,12 @@ namespace Language_es {
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Desfase de Z Parado");
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("UBL Paso a Paso");
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Crear Mallado Frío");
- PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2.Relleno inteligente");
+ PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2.Relleno intelig.");
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3.Validar Mallado");
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Ajustar Fino Todo");
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5.Validar Mallado");
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Ajustar Fino Todo");
- PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7.Guardar Mallado cama");
+ PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7.Guardar Mall. cama");
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("Control LED");
PROGMEM Language_Str MSG_LEDS = _UxGT("Luzes");
@@ -237,25 +237,57 @@ namespace Language_es {
PROGMEM Language_Str MSG_BED_Z = _UxGT("Cama Z");
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Boquilla");
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Boquilla ~");
+ PROGMEM Language_Str MSG_NOZZLE_PARKED = _UxGT("Boquilla Aparcada");
+ PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Boquilla en Espera");
PROGMEM Language_Str MSG_BED = _UxGT("Cama");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Recinto");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ventilador");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ventilador ~");
- PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Vel. Ext. ventilador");
- PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventilador ~");
+ PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vent. almacenado ~");
+ PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Vel. Ext. ventil.");
+ PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventil. ~");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT("Controlador Vent.");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Velocidad en reposo");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Modo Auto");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("Velocidad Activa");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("Periodo de reposo");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flujo");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flujo ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
- PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact");
+ PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Factor");
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Temperatura Auto.");
PROGMEM Language_Str MSG_LCD_ON = _UxGT("Encender");
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Apagar");
+ PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("PID Auto-ajuste");
+ PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("PID Auto-ajuste *");
+ PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
+ PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
+ PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
+ PROGMEM Language_Str MSG_PID_I_E = _UxGT("PID-I *");
+ PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
+ PROGMEM Language_Str MSG_PID_D_E = _UxGT("PID-D *");
+ PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
+ PROGMEM Language_Str MSG_PID_C_E = _UxGT("PID-C *");
+ PROGMEM Language_Str MSG_PID_F = _UxGT("PID-F");
+ PROGMEM Language_Str MSG_PID_F_E = _UxGT("PID-F *");
PROGMEM Language_Str MSG_SELECT = _UxGT("Seleccionar");
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Seleccionar *");
PROGMEM Language_Str MSG_ACC = _UxGT("Aceleración");
+ PROGMEM Language_Str MSG_JERK = _UxGT("Jerk");
+ PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk");
+ PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Jerk");
+ PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Jerk");
+ PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk");
+ PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Desviación de Unión");
PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocidad");
+ PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A;
+ PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B;
+ PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C;
+ PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E;
+ PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *");
+ PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin");
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vel. viaje min");
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Accel");
PROGMEM Language_Str MSG_AMAX_A = _UxGT("Acel. max") LCD_STR_A;
@@ -275,8 +307,8 @@ namespace Language_es {
PROGMEM Language_Str MSG_MOTION = _UxGT("Movimiento");
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filamento");
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E en mm³");
- PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
- PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *");
+ PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Diámetro Fil.");
+ PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Diámetro Fil. *");
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Descarga mm");
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Carga mm");
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Avance K");
@@ -286,6 +318,9 @@ namespace Language_es {
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Cargar EEPROM");
PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("Rest. fábrica");
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("Inicializar EEPROM");
+ PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("Err: EEPROM CRC");
+ PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("Err: Índice EEPROM");
+ PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("Err: Versión EEPROM");
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("Actualizar SD/USB");
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("Resetear Impresora");
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Recargar");
@@ -300,9 +335,14 @@ namespace Language_es {
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Reiniciar");
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Cancelar");
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Listo");
+ PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("Retroceder");
+ PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("Proceder");
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pausar impresión");
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Reanudar impresión");
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Detener impresión");
+ PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Imprimiendo Objeto");
+ PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Cancelar Objeto");
+ PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("Cancelar Objeto =");
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Recuper. por interr.");
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Imprim. desde SD/USB");
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("SD/USB no presente");
@@ -311,6 +351,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("Impresión Pausada");
PROGMEM Language_Str MSG_PRINTING = _UxGT("Imprimiendo...");
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Impresión cancelada");
+ PROGMEM Language_Str MSG_PRINT_DONE = _UxGT("Impresión Completada");
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Sin movimiento");
PROGMEM Language_Str MSG_KILLED = _UxGT("MUERTA");
PROGMEM Language_Str MSG_STOPPED = _UxGT("DETENIDA");
@@ -327,9 +368,8 @@ namespace Language_es {
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Purgar longitud");
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Cambiar Herramienta");
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Aumentar Z");
- PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Prime Speed");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Vel. de Cebado");
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Vel. de retracción");
- PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Colocar boquilla");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Cambiar filamento");
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Cambiar filamento *");
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Cargar filamento");
@@ -362,8 +402,11 @@ namespace Language_es {
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Subir TouchMI");
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("Subir Sonda Z");
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("Bajar Sonda Z");
- PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Origen %s%s%s Primero");
- PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Desfase Z");
+ PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Origen %s%s%s Prim.");
+ PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("Desfase Sonda");
+ PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("Desfase Sonda X");
+ PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("Desfase Sonda Y");
+ PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Desfase Sonda Z");
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Micropaso X");
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Micropaso Y");
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Micropaso Z");
@@ -419,9 +462,11 @@ namespace Language_es {
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("Extrusores");
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("Baudios");
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protocolo");
+ PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("Vig. Fuga Térm.: OFF");
+ PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("Vig. Fuga Térm.: ON");
+
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Luz cabina");
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Brillo cabina");
-
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("Impresora incorrecta");
#if LCD_WIDTH >= 20
@@ -437,6 +482,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Más larga");
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extruido");
#endif
+
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Temp. Mínima");
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp. Máxima");
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Fuente alimentación");
@@ -501,7 +547,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_START_Z = _UxGT("Inicio Z:");
PROGMEM Language_Str MSG_END_Z = _UxGT(" Fin Z:");
- PROGMEM Language_Str MSG_GAMES = _UxGT("Games");
+ PROGMEM Language_Str MSG_GAMES = _UxGT("Juegos");
PROGMEM Language_Str MSG_BRICKOUT = _UxGT("Brickout");
PROGMEM Language_Str MSG_INVADERS = _UxGT("Invaders");
PROGMEM Language_Str MSG_SNAKE = _UxGT("Sn4k3");
@@ -515,6 +561,7 @@ namespace Language_es {
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Pulse el botón para", "calentar la boquilla"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Calentando boquilla", "Espere por favor..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Espere para", "liberar el filamento"));
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Espere para", "cargar el filamento"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Espere para", "purgar el filamento"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Pulse para finalizar", "la purga de filamen."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Esperando impresora", "para reanudar..."));
@@ -531,17 +578,24 @@ namespace Language_es {
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Pulse para finalizar"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Reanudando..."));
#endif
-
PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("Controladores TMC");
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("Amperaje Controlador");
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("Límite Hibrido");
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("Origen sin sensores");
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("Modo de pasos");
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop Habilit.");
-
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Reiniciar");
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" dentro:");
-
- PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correction");
+ PROGMEM Language_Str MSG_BACKLASH = _UxGT("Backlash");
+ PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A;
+ PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B;
+ PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C;
+ PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Corrección");
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado");
+
+ PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT("Nivel Eje X");
+ PROGMEM Language_Str MSG_AUTO_CALIBRATE = _UxGT("Auto Calibrar");
+ PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("T. de esp. Calent.");
+ PROGMEM Language_Str MSG_REHEAT = _UxGT("Recalentar");
+ PROGMEM Language_Str MSG_REHEATING = _UxGT("Recalentando...");
}