diff --git a/Marlin/M100_Free_Mem_Chk.cpp b/Marlin/M100_Free_Mem_Chk.cpp
index 6033c0afe3..276df98eb1 100644
--- a/Marlin/M100_Free_Mem_Chk.cpp
+++ b/Marlin/M100_Free_Mem_Chk.cpp
@@ -180,10 +180,10 @@ void gcode_M100() {
x = code_value();
SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
ptr = (unsigned char*) __brkval;
- SERIAL_ECHOPAIR("\n__brkval : ", (long) ptr);
+ SERIAL_ECHOPAIR("\n__brkval : ", ptr);
ptr += 8;
sp = top_of_stack();
- SERIAL_ECHOPAIR("\nStack Pointer : ", (long) sp);
+ SERIAL_ECHOPAIR("\nStack Pointer : ", sp);
SERIAL_ECHOLNPGM("\n");
n = sp - ptr - 64; // -64 just to keep us from finding interrupt activity that
// has altered the stack.
@@ -204,10 +204,10 @@ void gcode_M100() {
if (m100_not_initialized || code_seen('I')) { // If no sub-command is specified, the first time
SERIAL_ECHOLNPGM("Initializing free memory block.\n"); // this happens, it will Initialize.
ptr = (unsigned char*) __brkval; // Repeated M100 with no sub-command will not destroy the
- SERIAL_ECHOPAIR("\n__brkval : ", (long) ptr); // state of the initialized free memory pool.
+ SERIAL_ECHOPAIR("\n__brkval : ", ptr); // state of the initialized free memory pool.
ptr += 8;
sp = top_of_stack();
- SERIAL_ECHOPAIR("\nStack Pointer : ", (long) sp);
+ SERIAL_ECHOPAIR("\nStack Pointer : ", sp);
SERIAL_ECHOLNPGM("\n");
n = sp - ptr - 64; // -64 just to keep us from finding interrupt activity that
// has altered the stack.
@@ -217,7 +217,7 @@ void gcode_M100() {
*(ptr + i) = (unsigned char) 0xe5;
for (i = 0; i < n; i++) {
if (*(ptr + i) != (unsigned char) 0xe5) {
- SERIAL_ECHOPAIR("? address : ", (unsigned long) ptr + i);
+ SERIAL_ECHOPAIR("? address : ", ptr + i);
SERIAL_ECHOPAIR("=", *(ptr + i));
SERIAL_ECHOLNPGM("\n");
}
diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index 8fb742e0d2..1499dff326 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -103,13 +103,15 @@ extern const char echomagic[] PROGMEM;
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
-#define SERIAL_ECHOPAIR(name,value) do{ serial_echopair_P(PSTR(name),(value)); }while(0)
+#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
void serial_echopair_P(const char* s_P, int v);
void serial_echopair_P(const char* s_P, long v);
void serial_echopair_P(const char* s_P, float v);
void serial_echopair_P(const char* s_P, double v);
void serial_echopair_P(const char* s_P, unsigned long v);
+FORCE_INLINE void serial_echopair_P(const char* s_P, bool v) { serial_echopair_P(s_P, (int)v); }
+FORCE_INLINE void serial_echopair_P(const char* s_P, void *v) { serial_echopair_P(s_P, (unsigned long)v); }
// Things to write to serial from Program memory. Saves 400 to 2k of RAM.
FORCE_INLINE void serialprintPGM(const char* str) {
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 8a3610d58f..f28987c61f 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1168,7 +1168,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
static void set_axis_is_at_home(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("set_axis_is_at_home(", (unsigned long)axis);
+ SERIAL_ECHOPAIR("set_axis_is_at_home(", axis);
SERIAL_ECHOLNPGM(") >>>");
}
#endif
@@ -1256,7 +1256,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", (unsigned long)axis);
+ SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", axis);
SERIAL_ECHOLNPGM(")");
}
#endif
@@ -1651,7 +1651,7 @@ static void setup_for_endstop_move() {
if (doRaise) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING);
+ SERIAL_ECHOPAIR("Raise Z (after) by ", Z_RAISE_AFTER_PROBING);
SERIAL_EOL;
SERIAL_ECHO("> SERVO_ENDSTOPS > raise_z_after_probing()");
SERIAL_EOL;
@@ -1747,7 +1747,7 @@ static void setup_for_endstop_move() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("probe_pt >>>");
- SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
+ SERIAL_ECHOPAIR("> ProbeAction:", probe_action);
SERIAL_EOL;
DEBUG_POS("", current_position);
}
@@ -1968,7 +1968,7 @@ static void setup_for_endstop_move() {
static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
+ SERIAL_ECHOPAIR(">>> homeaxis(", axis);
SERIAL_ECHOLNPGM(")");
}
#endif
@@ -2156,7 +2156,7 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
+ SERIAL_ECHOPAIR("<<< homeaxis(", axis);
SERIAL_ECHOLNPGM(")");
}
#endif
@@ -2484,7 +2484,7 @@ inline void gcode_G28() {
feedrate = max_feedrate[Z_AXIS] * 60; // feedrate (mm/m) = max_feedrate (mm/s)
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("Raise Z (before homing) to ", (float)(MIN_Z_HEIGHT_FOR_HOMING));
+ SERIAL_ECHOPAIR("Raise Z (before homing) to ", (MIN_Z_HEIGHT_FOR_HOMING));
SERIAL_EOL;
DEBUG_POS("> (home_all_axis || homeZ)", current_position);
DEBUG_POS("> (home_all_axis || homeZ)", destination);
@@ -3115,7 +3115,7 @@ inline void gcode_G28() {
if (probePointCounter) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
+ SERIAL_ECHOPAIR("z_before = (between) ", (Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
SERIAL_EOL;
}
#endif
@@ -3123,7 +3123,7 @@ inline void gcode_G28() {
else {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING);
+ SERIAL_ECHOPAIR("z_before = (before) ", Z_RAISE_BEFORE_PROBING);
SERIAL_EOL;
}
#endif
@@ -3481,6 +3481,9 @@ inline void gcode_G92() {
inline void gcode_M0_M1() {
char* args = current_command_args;
+ uint8_t test_value = 12;
+ SERIAL_ECHOPAIR("TEST", test_value);
+
millis_t codenum = 0;
bool hasP = false, hasS = false;
if (code_seen('P')) {
diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp
index 83bd8450bd..3f22b2f8c6 100644
--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@@ -328,7 +328,7 @@ void Config_StoreSettings() {
// Report storage size
SERIAL_ECHO_START;
- SERIAL_ECHOPAIR("Settings Stored (", (unsigned long)i);
+ SERIAL_ECHOPAIR("Settings Stored (", i);
SERIAL_ECHOLNPGM(" bytes)");
}
@@ -507,7 +507,7 @@ void Config_RetrieveSettings() {
// Report settings retrieved and length
SERIAL_ECHO_START;
SERIAL_ECHO(ver);
- SERIAL_ECHOPAIR(" stored settings retrieved (", (unsigned long)i);
+ SERIAL_ECHOPAIR(" stored settings retrieved (", i);
SERIAL_ECHOLNPGM(" bytes)");
}
@@ -730,9 +730,9 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("Mesh bed leveling:");
CONFIG_ECHO_START;
}
- SERIAL_ECHOPAIR(" M420 S", (unsigned long)mbl.active);
- SERIAL_ECHOPAIR(" X", (unsigned long)MESH_NUM_X_POINTS);
- SERIAL_ECHOPAIR(" Y", (unsigned long)MESH_NUM_Y_POINTS);
+ SERIAL_ECHOPAIR(" M420 S", mbl.active);
+ SERIAL_ECHOPAIR(" X", MESH_NUM_X_POINTS);
+ SERIAL_ECHOPAIR(" Y", MESH_NUM_Y_POINTS);
SERIAL_EOL;
for (uint8_t y = 0; y < MESH_NUM_Y_POINTS; y++) {
for (uint8_t x = 0; x < MESH_NUM_X_POINTS; x++) {
@@ -783,14 +783,14 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("Material heatup parameters:");
CONFIG_ECHO_START;
}
- SERIAL_ECHOPAIR(" M145 S0 H", (unsigned long)plaPreheatHotendTemp);
- SERIAL_ECHOPAIR(" B", (unsigned long)plaPreheatHPBTemp);
- SERIAL_ECHOPAIR(" F", (unsigned long)plaPreheatFanSpeed);
+ SERIAL_ECHOPAIR(" M145 S0 H", plaPreheatHotendTemp);
+ SERIAL_ECHOPAIR(" B", plaPreheatHPBTemp);
+ SERIAL_ECHOPAIR(" F", plaPreheatFanSpeed);
SERIAL_EOL;
CONFIG_ECHO_START;
- SERIAL_ECHOPAIR(" M145 S1 H", (unsigned long)absPreheatHotendTemp);
- SERIAL_ECHOPAIR(" B", (unsigned long)absPreheatHPBTemp);
- SERIAL_ECHOPAIR(" F", (unsigned long)absPreheatFanSpeed);
+ SERIAL_ECHOPAIR(" M145 S1 H", absPreheatHotendTemp);
+ SERIAL_ECHOPAIR(" B", absPreheatHPBTemp);
+ SERIAL_ECHOPAIR(" F", absPreheatFanSpeed);
SERIAL_EOL;
#endif // ULTIPANEL
@@ -805,7 +805,7 @@ void Config_PrintSettings(bool forReplay) {
if (forReplay) {
for (uint8_t i = 0; i < EXTRUDERS; i++) {
CONFIG_ECHO_START;
- SERIAL_ECHOPAIR(" M301 E", (unsigned long)i);
+ SERIAL_ECHOPAIR(" M301 E", i);
SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, i));
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, i)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, i)));
@@ -848,7 +848,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("LCD Contrast:");
CONFIG_ECHO_START;
}
- SERIAL_ECHOPAIR(" M250 C", (unsigned long)lcd_contrast);
+ SERIAL_ECHOPAIR(" M250 C", lcd_contrast);
SERIAL_EOL;
#endif
@@ -882,7 +882,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
CONFIG_ECHO_START;
}
- SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0));
+ SERIAL_ECHOPAIR(" M209 S", (autoretract_enabled ? 1 : 0));
SERIAL_EOL;
#endif // FWRETRACT
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 5d2761f1fd..a371361c28 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -294,20 +294,20 @@ void checkHitEndstops() {
SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
if (TEST(endstop_hit_bits, X_MIN)) {
- SERIAL_ECHOPAIR(" X:", (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
+ SERIAL_ECHOPAIR(" X:", endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
}
if (TEST(endstop_hit_bits, Y_MIN)) {
- SERIAL_ECHOPAIR(" Y:", (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
+ SERIAL_ECHOPAIR(" Y:", endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
}
if (TEST(endstop_hit_bits, Z_MIN)) {
- SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
+ SERIAL_ECHOPAIR(" Z:", endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
}
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
if (TEST(endstop_hit_bits, Z_MIN_PROBE)) {
- SERIAL_ECHOPAIR(" Z_MIN_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
+ SERIAL_ECHOPAIR(" Z_MIN_PROBE:", endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
}
#endif