diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde
index e28acdec97..de02c88024 100644
--- a/Marlin/Marlin.pde
+++ b/Marlin/Marlin.pde
@@ -75,7 +75,8 @@
// M27 - Report SD print status
// M28 - Start SD write (M28 filename.g)
// M29 - Stop SD write
-// M30 - Output time since last M109 or SD card start to serial
+// M30 - Delete file from SD (M30 filename.g)
+// M31 - Output time since last M109 or SD card start to serial
// M42 - Change pin status via gcode
// M80 - Turn on Power Supply
// M81 - Turn off Power Supply
@@ -738,9 +739,22 @@ void process_commands()
//processed in write to file routine above
//card,saving = false;
break;
+ case 30: //M30 <filename> Delete File
+ if (card.cardOK){
+ card.closefile();
+ starpos = (strchr(strchr_pointer + 4,'*'));
+ if(starpos != NULL){
+ char* npos = strchr(cmdbuffer[bufindr], 'N');
+ strchr_pointer = strchr(npos,' ') + 1;
+ *(starpos-1) = '\0';
+ }
+ card.removeFile(strchr_pointer + 4);
+ }
+ break;
+
#endif //SDSUPPORT
- case 30: //M30 take time since the start of the SD print or an M109 command
+ case 31: //M31 take time since the start of the SD print or an M109 command
{
stoptime=millis();
char time[30];
diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp
index dd1738c123..4a63f727a1 100644
--- a/Marlin/cardreader.cpp
+++ b/Marlin/cardreader.cpp
@@ -297,6 +297,75 @@ void CardReader::openFile(char* name,bool read)
}
+void CardReader::removeFile(char* name)
+{
+ if(!cardOK)
+ return;
+ file.close();
+ sdprinting = false;
+
+
+ SdFile myDir;
+ curDir=&root;
+ char *fname=name;
+
+ char *dirname_start,*dirname_end;
+ if(name[0]=='/')
+ {
+ dirname_start=strchr(name,'/')+1;
+ while(dirname_start>0)
+ {
+ dirname_end=strchr(dirname_start,'/');
+ //SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name));
+ //SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name));
+ if(dirname_end>0 && dirname_end>dirname_start)
+ {
+ char subdirname[13];
+ strncpy(subdirname, dirname_start, dirname_end-dirname_start);
+ subdirname[dirname_end-dirname_start]=0;
+ SERIAL_ECHOLN(subdirname);
+ if(!myDir.open(curDir,subdirname,O_READ))
+ {
+ SERIAL_PROTOCOLPGM("open failed, File: ");
+ SERIAL_PROTOCOL(subdirname);
+ SERIAL_PROTOCOLLNPGM(".");
+ return;
+ }
+ else
+ ;//SERIAL_ECHOLN("dive ok");
+
+ curDir=&myDir;
+ dirname_start=dirname_end+1;
+ }
+ else // the reminder after all /fsa/fdsa/ is the filename
+ {
+ fname=dirname_start;
+ //SERIAL_ECHOLN("remaider");
+ //SERIAL_ECHOLN(fname);
+ break;
+ }
+
+ }
+ }
+ else //relative path
+ {
+ curDir=&workDir;
+ }
+ if (file.remove(curDir, fname))
+ {
+ SERIAL_PROTOCOLPGM("File deleted:");
+ SERIAL_PROTOCOL(fname);
+ sdpos = 0;
+ }
+ else
+ {
+ SERIAL_PROTOCOLPGM("Deletion failed, File: ");
+ SERIAL_PROTOCOL(fname);
+ SERIAL_PROTOCOLLNPGM(".");
+ }
+
+}
+
void CardReader::getStatus()
{
if(cardOK){
diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h
index 55fa786d7b..e56c3a9e65 100644
--- a/Marlin/cardreader.h
+++ b/Marlin/cardreader.h
@@ -17,6 +17,7 @@ public:
void checkautostart(bool x);
void openFile(char* name,bool read);
+ void removeFile(char* name);
void closefile();
void release();
void startFileprint();
diff --git a/Marlin/language.h b/Marlin/language.h
index 0f1315a36c..dd320825a7 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -23,9 +23,10 @@
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
+ #define MSG_PREHEAT_PLA " Preheat PLA"
+ #define MSG_PREHEAT_ABS " Preheat ABS"
#define MSG_MOVE_AXIS " Move Axis \x7E"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
@@ -159,25 +160,26 @@
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
+ #define MSG_DISABLE_STEPPERS " Stepper abschalten"
+ #define MSG_AUTO_HOME " Auto Heim"
+ #define MSG_SET_ORIGIN " Position setzen"
+ #define MSG_PREHEAT_PLA " Aufheizen PLA"
+ #define MSG_PREHEAT_ABS " Aufheizen ABS"
+ #define MSG_COOLDOWN " Abkuehlen"
#define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
+ #define MSG_MOVE_AXIS " Achsen verfahren \x7E"
+ #define MSG_SPEED " Geschw:"
+ #define MSG_NOZZLE " \002Duese:"
+ #define MSG_BED " \002Bett:"
+ #define MSG_FAN_SPEED " Luefter geschw.:"
+ #define MSG_FLOW " Fluss:"
+ #define MSG_CONTROL " Kontrolle \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
+ #define MSG_FACTOR " \002 Faktor:"
+ #define MSG_AUTOTEMP " AutoTemp:"
+ #define MSG_ON "Ein "
+ #define MSG_OFF "Aus "
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
@@ -198,21 +200,20 @@
#define MSG_ZSTEPS " Zsteps/mm:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+ #define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
+ #define MSG_STORE_EPROM " EPROM speichern"
+ #define MSG_LOAD_EPROM " EPROM laden"
+ #define MSG_RESTORE_FAILSAFE " Standard Konfig."
#define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
+ #define MSG_WATCH " Beobachten \003"
#define MSG_PREPARE " Prepare \x7E"
#define MSG_PREPARE_ALT " Prepare \003"
- #define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_STOP_PRINT " Druck stoppen \x7E"
+ #define MSG_CARD_MENU " SDKarten Menue \x7E"
+ #define MSG_NO_CARD " Keine SDKarte"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur."
#define MSG_DWELL "DWELL..."
#define MSG_NO_MOVE "No move."
#define MSG_PART_RELEASE "Partial Release"
diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde
index afb6908a16..47dc2d5cc9 100644
--- a/Marlin/ultralcd.pde
+++ b/Marlin/ultralcd.pde
@@ -658,14 +658,14 @@ void MainMenu::showAxisMove()
{
if (encoderpos >0)
{
- enquecommand("G1 F170 Z0.1");
+ enquecommand("G1 F70 Z0.1");
oldencoderpos=encoderpos;
encoderpos=0;
}
else if (encoderpos < 0)
{
- enquecommand("G1 F1700 Z-0.1");
+ enquecommand("G1 F70 Z-0.1");
oldencoderpos=encoderpos;
encoderpos=0;
}