diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h
index 25cecf4f50..5b6ac3df58 100644
--- a/Marlin/Conditionals_post.h
+++ b/Marlin/Conditionals_post.h
@@ -1238,9 +1238,6 @@
   #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
 #endif
 
-// Stepper pulse duration, in cycles
-#define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
-
 // Updated G92 behavior shifts the workspace
 #define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS)
 // The home offset also shifts the coordinate space
@@ -1313,12 +1310,11 @@
 
 // Calculate a default maximum stepper rate, if not supplied
 #ifndef MAXIMUM_STEPPER_RATE
-  #define MAXIMUM_STEPPER_RATE (1000000UL / (2UL * (MINIMUM_STEPPER_PULSE)))
-#endif
-
-// Calculate a default maximum stepper rate, if not supplied
-#ifndef MAXIMUM_STEPPER_RATE
-  #define MAXIMUM_STEPPER_RATE (1000000UL / (2UL * (MINIMUM_STEPPER_PULSE)))
+  #if MINIMUM_STEPPER_PULSE
+    #define MAXIMUM_STEPPER_RATE (1000000UL / (2UL * (MINIMUM_STEPPER_PULSE)))
+  #else
+    #define MAXIMUM_STEPPER_RATE 500000UL
+  #endif
 #endif
 
 //
@@ -1383,7 +1379,12 @@
 #define MIN_ISR_LOOP_CYCLES (ISR_X_STEPPER_CYCLES + ISR_Y_STEPPER_CYCLES + ISR_Z_STEPPER_CYCLES + ISR_E_STEPPER_CYCLES + ISR_MIXING_STEPPER_CYCLES)
 
 // Calculate the minimum MPU cycles needed per pulse to enforce not surpassing the maximum stepper rate
-#define MIN_STEPPER_PULSE_CYCLES MAX((F_CPU) / (MAXIMUM_STEPPER_RATE), ((F_CPU) / 500000UL) * MINIMUM_STEPPER_PULSE)
+#define _MIN_STEPPER_PULSE_CYCLES(N) MAX((F_CPU) / (MAXIMUM_STEPPER_RATE), ((F_CPU) / 500000UL) * (N))
+#if MINIMUM_STEPPER_PULSE
+  #define MIN_STEPPER_PULSE_CYCLES _MIN_STEPPER_PULSE_CYCLES(MINIMUM_STEPPER_PULSE)
+#else
+  #define MIN_STEPPER_PULSE_CYCLES _MIN_STEPPER_PULSE_CYCLES(1)
+#endif
 
 // But the user could be enforcing a minimum time, so the loop time is
 #define ISR_LOOP_CYCLES (ISR_LOOP_BASE_CYCLES + MAX(MIN_STEPPER_PULSE_CYCLES, MIN_ISR_LOOP_CYCLES))
@@ -1406,7 +1407,7 @@
 #endif
 
 // Now estimate the total ISR execution time in cycles given a step per ISR multiplier
-#define ISR_EXECUTION_CYCLES(rate) (((ISR_BASE_CYCLES + (ISR_LOOP_CYCLES * rate) + ISR_LA_BASE_CYCLES + ISR_LA_LOOP_CYCLES)) / rate)
+#define ISR_EXECUTION_CYCLES(rate) (((ISR_BASE_CYCLES + ISR_S_CURVE_CYCLES + (ISR_LOOP_CYCLES * rate) + ISR_LA_BASE_CYCLES + ISR_LA_LOOP_CYCLES)) / rate)
 
 // The maximum allowable stepping frequency when doing x128-x1 stepping (in Hz)
 #define MAX_128X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(128))
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 5f8530c80b..cff0244c8b 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 60715bd11b..afad9cef69 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 0c2e5d5a89..468562a616 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index a3304c20ef..d2f8799d1e 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
index 58c61040fb..289807c6ba 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
index 5f8530c80b..cff0244c8b 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 3db720b377..77df1cf85a 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 5fe95b651a..0e06856a5f 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -819,6 +819,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -832,9 +833,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 3db720b377..77df1cf85a 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 58b19ae306..3f6afbb2a4 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index caea18b423..4b34c46a17 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 54e7630883..8d69e9edf0 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
index 65db893f37..c9650fa311 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
index 34e411cae6..058e3cc42b 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
index 2b54237522..a5b0a5b54a 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
index 5581bb3f2e..95ffe1c9aa 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
index 34e411cae6..058e3cc42b 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 96d0a927cf..09c46d1d57 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 67fe5f859b..e018efc69a 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 6f93f3d190..66dda80476 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 6f93f3d190..66dda80476 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index f0924c7004..55172c848b 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index c3a84aa335..4acbe9a3de 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index f481a0029a..92e5a72035 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 30f2229e77..00d964c985 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index f580e791fd..cebbfea35a 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 8fa61daf96..fe83423639 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 0f4e69e1db..15e77a8cf3 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index dd7e7f17b9..ac511a2f68 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index 0e0bf6e102..55cd3a6ccc 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -814,6 +814,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -827,9 +828,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 2ccddc2154..1cd71f9ace 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index a929510ae5..bf2c5c30ac 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index c03c991862..bed1d6c4e7 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index 8424739378..774cf8752b 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 154b5caabc..92895a5c96 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 154b5caabc..92895a5c96 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 154b5caabc..92895a5c96 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index db34166bd1..fc58078ca6 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -818,6 +818,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -831,9 +832,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 0f7d5703bf..291ed5064e 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -813,6 +813,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -826,9 +827,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 77773de185..e95bd1abad 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index f0dc1c3f3a..679e738cab 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index b21648ace3..2e1c83f1a1 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -811,6 +811,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -824,9 +825,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index f51cfc9b39..2f2f422f32 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -812,6 +812,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers
@@ -825,9 +826,10 @@
  *  400000 : Maximum for TMC2xxx stepper drivers
  *  250000 : Maximum for DRV8825 stepper driver
  *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
  *   15000 : Maximum for TB6560 stepper driver
  */
-#define MAXIMUM_STEPPER_RATE 250000 // DRV8825
+#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index ae1dff9902..e721125a16 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -1266,7 +1266,7 @@ void Stepper::stepper_pulse_phase_isr() {
   // Just update the value we will get at the end of the loop
   step_events_completed += events_to_do;
 
-  #if MINIMUM_STEPPER_PULSE > 0
+  #if MINIMUM_STEPPER_PULSE
     // Get the timer count and estimate the end of the pulse
     hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
   #endif
@@ -1339,7 +1339,7 @@ void Stepper::stepper_pulse_phase_isr() {
       #endif
     #endif // !LIN_ADVANCE
 
-    #if MINIMUM_STEPPER_PULSE > 0
+    #if MINIMUM_STEPPER_PULSE
       // Just wait for the requested pulse duration
       while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
       // Add to the value, the value needed for the pulse end and ensuring the maximum driver rate is enforced
@@ -1373,7 +1373,7 @@ void Stepper::stepper_pulse_phase_isr() {
     // Decrement the count of pending pulses to do
     --events_to_do;
 
-    #if MINIMUM_STEPPER_PULSE > 0
+    #if MINIMUM_STEPPER_PULSE
       // For minimum pulse time wait after stopping pulses also
       if (events_to_do) {
         // Just wait for the requested pulse duration
@@ -1763,7 +1763,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
     // Step E stepper if we have steps
     while (LA_steps) {
 
-      #if MINIMUM_STEPPER_PULSE > 0
+      #if MINIMUM_STEPPER_PULSE
         hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE));
       #endif
 
@@ -1778,7 +1778,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
         E_STEP_WRITE(active_extruder, !INVERT_E_STEP_PIN);
       #endif
 
-      #if MINIMUM_STEPPER_PULSE > 0
+      #if MINIMUM_STEPPER_PULSE
         // Just wait for the requested pulse duration
         while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
         // Add to the value, the value needed for the pulse end and ensuring the maximum driver rate is enforced
@@ -1798,7 +1798,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
         E_STEP_WRITE(active_extruder, INVERT_E_STEP_PIN);
       #endif
 
-      #if MINIMUM_STEPPER_PULSE > 0
+      #if MINIMUM_STEPPER_PULSE
         // For minimum pulse time wait before looping
         // Just wait for the requested pulse duration
         if (LA_steps) while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ }
@@ -2099,6 +2099,12 @@ void Stepper::report_positions() {
 
 #if ENABLED(BABYSTEPPING)
 
+  #if MINIMUM_STEPPER_PULSE
+    #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
+  #else
+    #define STEP_PULSE_CYCLES 0
+  #endif
+
   #if ENABLED(DELTA)
     #define CYCLES_EATEN_BABYSTEP (2 * 15)
   #else