From 79e1eccb7eab844fd515b6ec9cb83ceeba541dcc Mon Sep 17 00:00:00 2001
From: Przemek Grondek <przemek@grondek.pl>
Date: Mon, 13 Sep 2021 19:10:43 +0200
Subject: [PATCH] Update config

---
 Marlin/Configuration.h                 | 15 ++++++++-------
 Marlin/Configuration_adv.h             |  8 ++++----
 Marlin/src/pins/ramps/pins_MKS_GEN_L.h |  2 +-
 3 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 3ed893428c..6337e73913 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -140,6 +140,7 @@
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_MKS_GEN_L
+  #define FAN_PIN                 7
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
@@ -567,8 +568,8 @@
 #define PID_K1 0.95      // Smoothing factor within any PID loop
 
 #if ENABLED(PIDTEMP)
-  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
-  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
+  #define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
+  #define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
   //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with gcode: M301 E[extruder number, 0-2]
 
@@ -624,8 +625,8 @@
 //  #define DEFAULT_bedKd 305.4
 
   //TEVO Tarantula Custom PID Settings - Stock Heatbed
-  #define DEFAULT_bedKp 984.88
-  #define DEFAULT_bedKi 193.91
+  #define DEFAULT_bedKp  984.88
+  #define DEFAULT_bedKi  193.91
   #define DEFAULT_bedKd 1250.55
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
@@ -899,7 +900,7 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 1600, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
@@ -948,8 +949,8 @@
  */
 #define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK 10.0
-  #define DEFAULT_YJERK 10.0
+  #define DEFAULT_XJERK 15.0
+  #define DEFAULT_YJERK 15.0
   #define DEFAULT_ZJERK  0.3
   //#define DEFAULT_IJERK  0.3
   //#define DEFAULT_JJERK  0.3
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index e18181a4ee..191ba93bfe 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -551,7 +551,7 @@
  * Multiple extruders can be assigned to the same pin in which case
  * the fan will turn on when any selected extruder is above the threshold.
  */
-#define E0_AUTO_FAN_PIN 7
+#define E0_AUTO_FAN_PIN 9
 #define E1_AUTO_FAN_PIN -1
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
@@ -945,7 +945,7 @@
  * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DEFAULT_STEPPER_DEACTIVE_TIME 60
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
@@ -1308,7 +1308,7 @@
 
   // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
   // Enable this option and set to HIGH if your SD cards are incorrectly detected.
-  //#define SD_DETECT_STATE HIGH
+  #define SD_DETECT_STATE HIGH
 
   //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
   //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)
@@ -1822,7 +1822,7 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h
index 522a34cda1..4f29b4ae4f 100644
--- a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h
+++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h
@@ -35,7 +35,7 @@
 // Heaters / Fans
 //
 // Power outputs EFBF or EFBE
-#define MOSFET_D_PIN 7
+#define MOSFET_D_PIN 9
 
 //
 // CS Pins wired to avoid conflict with the LCD