diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h
index 2d4029e47c..07faabd883 100644
--- a/Marlin/cardreader.h
+++ b/Marlin/cardreader.h
@@ -81,11 +81,11 @@ extern CardReader card;
#define IS_SD_PRINTING (card.sdprinting)
-#if (SDCARDDETECT > -1)
+#if PIN_EXISTS(SDCARDDETECT)
#if ENABLED(SDCARDDETECTINVERTED)
- #define IS_SD_INSERTED (READ(SDCARDDETECT) != 0)
+ #define IS_SD_INSERTED (READ(SDCARDDETECT_PIN) != 0)
#else
- #define IS_SD_INSERTED (READ(SDCARDDETECT) == 0)
+ #define IS_SD_INSERTED (READ(SDCARDDETECT_PIN) == 0)
#endif
#else
//No card detect line? Assume the card is inserted.
diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h
index f2ffe475d9..7e2c0a488a 100644
--- a/Marlin/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/pins_AZTEEG_X3_PRO.h
@@ -109,7 +109,7 @@
#define BTN_ENC 39 //the click switch
#define SDSS 53
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#define KILL_PIN 31
#endif
diff --git a/Marlin/pins_BRAINWAVE_PRO.h b/Marlin/pins_BRAINWAVE_PRO.h
index a870cbeb94..b27aa362aa 100644
--- a/Marlin/pins_BRAINWAVE_PRO.h
+++ b/Marlin/pins_BRAINWAVE_PRO.h
@@ -54,7 +54,7 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
-#define SDCARDDETECT 12
+#define SDCARDDETECT_PIN 12
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
diff --git a/Marlin/pins_CHEAPTRONIC.h b/Marlin/pins_CHEAPTRONIC.h
index dbf53a7e2e..72ee63bd68 100644
--- a/Marlin/pins_CHEAPTRONIC.h
+++ b/Marlin/pins_CHEAPTRONIC.h
@@ -86,4 +86,4 @@
#define BLEN_A 0
// Cheaptronic v1.0 does not use this port
-#define SDCARDDETECT -1
+#define SDCARDDETECT_PIN -1
diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h
index f581f287c7..55b44bf275 100644
--- a/Marlin/pins_ELEFU_3.h
+++ b/Marlin/pins_ELEFU_3.h
@@ -64,7 +64,7 @@
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53
- #define SDCARDDETECT 28
+ #define SDCARDDETECT_PIN 28
#define BTN_EN1 14
#define BTN_EN2 39
diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h
index 6f7394e52b..d345c37c99 100644
--- a/Marlin/pins_FELIX2.h
+++ b/Marlin/pins_FELIX2.h
@@ -19,6 +19,6 @@
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
- #define SDCARDDETECT 6
+ #define SDCARDDETECT_PIN 6
#endif // NEWPANEL && ULTRA_LCD
diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h
index 673632da30..9c489d15a4 100644
--- a/Marlin/pins_GEN7_CUSTOM.h
+++ b/Marlin/pins_GEN7_CUSTOM.h
@@ -57,7 +57,7 @@
//#define RX_ENABLE_PIN 13
#define BEEPER_PIN -1
-#define SDCARDDETECT -1
+#define SDCARDDETECT_PIN -1
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
#define KILL_PIN -1
diff --git a/Marlin/pins_LEAPFROG.h b/Marlin/pins_LEAPFROG.h
index 52ca619399..45cf6bde4f 100644
--- a/Marlin/pins_LEAPFROG.h
+++ b/Marlin/pins_LEAPFROG.h
@@ -42,7 +42,7 @@
#define SDPOWER -1
#define SDSS 11
-#define SDCARDDETECT -1 // 10 optional also used as mode pin
+#define SDCARDDETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN 13
#define FAN_PIN 7
#define PS_ON_PIN -1
diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h
index 03ea94ee5b..aa39c39204 100644
--- a/Marlin/pins_MEGACONTROLLER.h
+++ b/Marlin/pins_MEGACONTROLLER.h
@@ -107,6 +107,6 @@
#define BTN_EN2 11
#define BTN_ENC 10 //the click switch
//not connected to a pin
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#endif //Minipanel
diff --git a/Marlin/pins_MEGATRONICS.h b/Marlin/pins_MEGATRONICS.h
index 5b7e518236..82b6e8175d 100644
--- a/Marlin/pins_MEGATRONICS.h
+++ b/Marlin/pins_MEGATRONICS.h
@@ -78,6 +78,6 @@
#define BLEN_B 1
#define BLEN_A 0
- #define SDCARDDETECT -1 // RAMPS doesn't use this
+ #define SDCARDDETECT_PIN -1 // RAMPS doesn't use this
#endif // ULTRA_LCD && NEWPANEL
diff --git a/Marlin/pins_MEGATRONICS_2.h b/Marlin/pins_MEGATRONICS_2.h
index e5c3a91bee..8f9046c498 100644
--- a/Marlin/pins_MEGATRONICS_2.h
+++ b/Marlin/pins_MEGATRONICS_2.h
@@ -94,4 +94,4 @@
#define BLEN_B 1
#define BLEN_A 0
-#define SDCARDDETECT -1 // Megatronics does not use this port
+#define SDCARDDETECT_PIN -1 // Megatronics does not use this port
diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h
index 57f37b02fd..e0bea57d50 100644
--- a/Marlin/pins_MEGATRONICS_3.h
+++ b/Marlin/pins_MEGATRONICS_3.h
@@ -99,4 +99,4 @@
#define BLEN_B 1
#define BLEN_A 0
-#define SDCARDDETECT -1 // Megatronics does not use this port
+#define SDCARDDETECT_PIN -1 // Megatronics does not use this port
diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h
index 8e12cf2a7a..9732e342f5 100644
--- a/Marlin/pins_MINIRAMBO.h
+++ b/Marlin/pins_MINIRAMBO.h
@@ -107,7 +107,7 @@
#define BTN_EN2 72
#define BTN_ENC 9 // the click
- #define SDCARDDETECT 15
+ #define SDCARDDETECT_PIN 15
#endif //NEWPANEL
#endif //ULTRA_LCD
diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h
index ad613fb3b0..4fc35b93e6 100644
--- a/Marlin/pins_MINITRONICS.h
+++ b/Marlin/pins_MINITRONICS.h
@@ -78,4 +78,4 @@
#define BLEN_B 1
#define BLEN_A 0
-#define SDCARDDETECT -1 // Megatronics does not use this port
+#define SDCARDDETECT_PIN -1 // Minitronics does not use this port
diff --git a/Marlin/pins_OMCA.h b/Marlin/pins_OMCA.h
index 91efbd295f..173177f8ca 100644
--- a/Marlin/pins_OMCA.h
+++ b/Marlin/pins_OMCA.h
@@ -70,7 +70,7 @@
#define SDPOWER -1
#define SDSS 11
-#define SDCARDDETECT -1 // 10 optional also used as mode pin
+#define SDCARDDETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define FAN_PIN 14 // PWM on MIDDLE connector
#define PS_ON_PIN -1
diff --git a/Marlin/pins_OMCA_A.h b/Marlin/pins_OMCA_A.h
index 857ff7752f..f66de1ff4f 100644
--- a/Marlin/pins_OMCA_A.h
+++ b/Marlin/pins_OMCA_A.h
@@ -61,7 +61,7 @@
#define SDPOWER -1
#define SDSS 11
-#define SDCARDDETECT -1 // 10 optional also used as mode pin
+#define SDCARDDETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define FAN_PIN 3
#define PS_ON_PIN -1
diff --git a/Marlin/pins_PRINTRBOARD.h b/Marlin/pins_PRINTRBOARD.h
index b68bf20bde..ff81cfee95 100644
--- a/Marlin/pins_PRINTRBOARD.h
+++ b/Marlin/pins_PRINTRBOARD.h
@@ -88,7 +88,7 @@
#define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping)
#endif // LCD_I2C_PANELOLU2
//not connected to a pin
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#endif // ULTRA_LCD && NEWPANEL
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
@@ -104,7 +104,7 @@
#define BTN_ENC 47 //the click switch
#define SDSS 45
- #define SDCARDDETECT -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
+ #define SDCARDDETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 12 //Non-FastIO
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index 57b7a68413..2600c36e80 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -133,7 +133,7 @@
#define BLEN_B 1
#define BLEN_A 0
- #define SDCARDDETECT 81 // Ramps does not use this port
+ #define SDCARDDETECT_PIN 81 // Ramps doesn't use this port
#else //!NEWPANEL - old style panel with shift register
@@ -180,7 +180,7 @@
#define BTN_EN2 84
#define BTN_ENC 83 //the click switch
- #define SDCARDDETECT -1 // Pin 72 if using easy adapter board
+ #define SDCARDDETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
diff --git a/Marlin/pins_RAMPS_13.h b/Marlin/pins_RAMPS_13.h
index bc109efa09..67ca166ba1 100644
--- a/Marlin/pins_RAMPS_13.h
+++ b/Marlin/pins_RAMPS_13.h
@@ -165,25 +165,25 @@
#define BTN_EN2 33
#define BTN_ENC 35
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER_PIN 23
@@ -210,7 +210,7 @@
#define BTN_EN2 63
#define BTN_ENC 59 //the click switch
//not connected to a pin
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#else
@@ -235,9 +235,9 @@
#endif
#if ENABLED(G3D_PANEL)
- #define SDCARDDETECT 49
+ #define SDCARDDETECT_PIN 49
#else
- #define SDCARDDETECT -1 // Ramps does not use this port
+ #define SDCARDDETECT_PIN -1 // Ramps does not use this port
#endif
#endif
diff --git a/Marlin/pins_RIGIDBOARD.h b/Marlin/pins_RIGIDBOARD.h
index f7789c1daa..9053974347 100644
--- a/Marlin/pins_RIGIDBOARD.h
+++ b/Marlin/pins_RIGIDBOARD.h
@@ -25,8 +25,8 @@
#undef BEEPER_PIN
#define BEEPER_PIN -1
- #undef SDCARDDETECT
- #define SDCARDDETECT 22
+ #undef SDCARDDETECT_PIN
+ #define SDCARDDETECT_PIN 22
// Extra button definitions, substitute for EN1 / EN2
#define BTN_UP 37 // BTN_EN1
@@ -43,16 +43,16 @@
#undef BTN_ENC
#define BTN_ENC 31
- #undef SDCARDDETECT
- #define SDCARDDETECT 22
+ #undef SDCARDDETECT_PIN
+ #define SDCARDDETECT_PIN 22
#elif defined(REPRAP_DISCOUNT_SMART_CONTROLLER)
#undef BEEPER_PIN
#define BEEPER_PIN -1
- #undef SDCARDDETECT
- #define SDCARDDETECT 22
+ #undef SDCARDDETECT_PIN
+ #define SDCARDDETECT_PIN 22
#undef KILL_PIN
#define KILL_PIN 32
diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h
index a8f12aa503..c2ac2c1850 100644
--- a/Marlin/pins_RUMBA.h
+++ b/Marlin/pins_RUMBA.h
@@ -101,7 +101,7 @@
#define SDPOWER -1
#define SDSS 53
-#define SDCARDDETECT 49
+#define SDCARDDETECT_PIN 49
#define BEEPER_PIN 44
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
diff --git a/Marlin/pins_SANGUINOLOLU_11.h b/Marlin/pins_SANGUINOLOLU_11.h
index 184fa37ec7..93eb68254b 100644
--- a/Marlin/pins_SANGUINOLOLU_11.h
+++ b/Marlin/pins_SANGUINOLOLU_11.h
@@ -156,7 +156,7 @@
#define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif //Panelolu2
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#elif ENABLED(MAKRPANEL)
@@ -178,7 +178,7 @@
#define BTN_EN2 10
#define BTN_ENC 16
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#endif // MAKRPANEL
diff --git a/Marlin/pins_SAV_MKI.h b/Marlin/pins_SAV_MKI.h
index f938e91a2c..e5cfd79f7d 100644
--- a/Marlin/pins_SAV_MKI.h
+++ b/Marlin/pins_SAV_MKI.h
@@ -83,7 +83,7 @@
#define LED_PIN -1
#define PS_ON_PIN -1
#define ALARM_PIN -1
-#define SDCARDDETECT -1
+#define SDCARDDETECT_PIN -1
#define BEEPER_PIN -1
#define LCD_PINS_RS -1
diff --git a/Marlin/pins_TEENSY2.h b/Marlin/pins_TEENSY2.h
index 4f568b7f8e..1328a4a335 100644
--- a/Marlin/pins_TEENSY2.h
+++ b/Marlin/pins_TEENSY2.h
@@ -86,7 +86,7 @@
#define TEMP_2_PIN -1
#define SDPOWER -1
-#define SDCARDDETECT -1
+#define SDCARDDETECT_PIN -1
#define SDSS 20 // 8
#define LED_PIN 6
#define PS_ON_PIN 27
diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h
index 9d0ff9e3f5..0f8c24ed39 100644
--- a/Marlin/pins_TEENSYLU.h
+++ b/Marlin/pins_TEENSYLU.h
@@ -78,7 +78,7 @@
#define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping)
#endif // LCD_I2C_PANELOLU2
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#endif // ULTRA_LCD && NEWPANEL
diff --git a/Marlin/pins_ULTIMAIN_2.h b/Marlin/pins_ULTIMAIN_2.h
index 46d8ee2a63..95675f4103 100644
--- a/Marlin/pins_ULTIMAIN_2.h
+++ b/Marlin/pins_ULTIMAIN_2.h
@@ -76,4 +76,4 @@
#define BLEN_B 1
#define BLEN_A 0
-#define SDCARDDETECT 39
+#define SDCARDDETECT_PIN 39
diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h
index 9f0bb18c83..ef0d2dff69 100644
--- a/Marlin/pins_ULTIMAKER.h
+++ b/Marlin/pins_ULTIMAKER.h
@@ -73,7 +73,7 @@
#define BTN_EN2 42
#define BTN_ENC 19
- #define SDCARDDETECT 38
+ #define SDCARDDETECT_PIN 38
#else //!NEWPANEL - Old style panel with shift register
@@ -90,7 +90,7 @@
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
- #define SDCARDDETECT -1
+ #define SDCARDDETECT_PIN -1
#endif // !NEWPANEL
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index fa47947b95..8066e88dec 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -221,7 +221,7 @@ static void lcd_status_screen();
millis_t next_button_update_ms;
uint8_t lastEncoderBits;
uint32_t encoderPosition;
- #if (SDCARDDETECT > 0)
+ #if PIN_EXISTS(SDCARDDETECT)
bool lcd_oldcardstatus;
#endif
@@ -411,14 +411,14 @@ static void lcd_main_menu() {
}
else {
MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
- #if SDCARDDETECT < 1
+ #if !PIN_EXISTS(SDCARDDETECT)
MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user
#endif
}
}
else {
MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu);
- #if SDCARDDETECT < 1
+ #if !PIN_EXISTS(SDCARDDETECT)
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
#endif
}
@@ -1156,7 +1156,7 @@ static void lcd_control_volumetric_menu() {
}
#endif // FWRETRACT
-#if SDCARDDETECT == -1
+#if !PIN_EXISTS(SDCARDDETECT)
static void lcd_sd_refresh() {
card.initsd();
currentMenuViewOffset = 0;
@@ -1180,7 +1180,7 @@ void lcd_sdcard_menu() {
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
card.getWorkDirName();
if (card.filename[0] == '/') {
- #if SDCARDDETECT == -1
+ #if !PIN_EXISTS(SDCARDDETECT)
MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
#endif
}
@@ -1407,11 +1407,11 @@ void lcd_init() {
#endif // SR_LCD_2W_NL
#endif//!NEWPANEL
- #if ENABLED(SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0)
- pinMode(SDCARDDETECT, INPUT);
- WRITE(SDCARDDETECT, HIGH);
+ #if ENABLED(SDSUPPORT) && PIN_EXISTS(SDCARDDETECT)
+ pinMode(SDCARDDETECT_PIN, INPUT);
+ WRITE(SDCARDDETECT_PIN, HIGH);
lcd_oldcardstatus = IS_SD_INSERTED;
- #endif //(SDCARDDETECT > 0)
+ #endif
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
slow_buttons = 0;
@@ -1466,7 +1466,7 @@ void lcd_update() {
lcd_buttons_update();
- #if (SDCARDDETECT > 0)
+ #if PIN_EXISTS(SDCARDDETECT)
if (IS_SD_INSERTED != lcd_oldcardstatus && lcd_detected()) {
lcdDrawUpdate = 2;
lcd_oldcardstatus = IS_SD_INSERTED;