diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 97d2d95f90..16865c4878 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -223,16 +223,16 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
+ // pins_XXX.h file overrides this one
+ #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
// and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+ //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1029,7 +1029,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/boards.h b/Marlin/boards.h
index 6594b30fac..24ab48c86d 100644
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@@ -95,7 +95,7 @@
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
-#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
+#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define MB(board) (MOTHERBOARD==BOARD_##board)
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 4eec94c07c..36d2a43667 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index f3b44a4660..8a09f18c05 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
index 662d679a82..a5fd5c5e6b 100644
--- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1031,7 +1029,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index c4843b6ec8..de751085a4 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index 385adadb96..09e91b5d8e 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1006,7 +1004,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 482d89a98f..ddb7404863 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -236,16 +236,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1035,7 +1033,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h
index e3c6ccf26e..a529888051 100644
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/M150/Configuration_adv.h b/Marlin/example_configurations/M150/Configuration_adv.h
index 2253ce4351..3962f2d40e 100644
--- a/Marlin/example_configurations/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/M150/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1029,7 +1027,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 570538c59b..f939c4d2c7 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 718a4b90b0..7fe55a0b78 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index a833712b05..5ee685360f 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 3de9a920ca..b6e6175fb8 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1025,7 +1023,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index c4843b6ec8..de751085a4 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 1d798fb943..51f95e1f27 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1027,7 +1025,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 5363cb3f6a..c9dc15e7a2 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1026,7 +1024,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 53a86374bd..334fba863b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1024,7 +1022,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 53a86374bd..334fba863b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1024,7 +1022,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 5798c53e70..d46820b121 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -228,16 +228,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1029,7 +1027,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index fdc295253b..6440d1611d 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1024,7 +1022,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
index 4814b7a246..799acd32a4 100644
--- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1031,7 +1029,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index fbbb866902..026e2443a8 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 2a5b63492e..249166ca10 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1022,7 +1020,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index f78a297fc6..245eeee210 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -223,16 +223,14 @@
/**
* M355 Case Light on-off / brightness
*/
-//#define CASE_LIGHT_ENABLE
-#if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
- // pins_XXX.h file overrides this one
- #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
- #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
- #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
- // and if CASE_LIGHT_DEFAULT is set to on
- //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
-#endif
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+#endif
//===========================================================================
//============================ Mechanical Settings ==========================
@@ -1025,7 +1023,7 @@
*/
#define TMC2130_ADV() { }
-#endif // ENABLED(HAVE_TMC2130)
+#endif // HAVE_TMC2130
// @section L6470
diff --git a/Marlin/gcode.cpp b/Marlin/gcode.cpp
index 0cb2337338..d23db21f70 100644
--- a/Marlin/gcode.cpp
+++ b/Marlin/gcode.cpp
@@ -183,7 +183,7 @@ void GCodeParser::parse(char *p) {
#endif
if (PARAM_TEST) {
-
+
while (*p == ' ') p++; // skip spaces vetween parameters & values
const bool has_num = DECIMAL_SIGNED(*p); // The parameter has a number [-+0-9.]