From 9d36dfcedafd114f6d8bc080701b0db0b483baa8 Mon Sep 17 00:00:00 2001 From: Scott Lahteine <github@thinkyhead.com> Date: Tue, 15 May 2018 21:14:28 -0500 Subject: [PATCH] Add FAN_MAX_PWM to example configs --- .../AlephObjects/TAZ4/Configuration_adv.h | 16 +++++++++++++--- .../Anet/A6/Configuration_adv.h | 16 +++++++++++++--- .../Anet/A8/Configuration_adv.h | 16 +++++++++++++--- .../BIBO/TouchX/Cyclops/Configuration_adv.h | 16 +++++++++++++--- .../BIBO/TouchX/default/Configuration_adv.h | 16 +++++++++++++--- .../BQ/Hephestos/Configuration_adv.h | 16 +++++++++++++--- .../BQ/Hephestos_2/Configuration_adv.h | 16 +++++++++++++--- .../BQ/WITBOX/Configuration_adv.h | 16 +++++++++++++--- .../Cartesio/Configuration_adv.h | 16 +++++++++++++--- .../Creality/CR-10/Configuration_adv.h | 16 +++++++++++++--- .../Creality/CR-10S/Configuration_adv.h | 16 +++++++++++++--- .../Creality/CR-10mini/Configuration_adv.h | 16 +++++++++++++--- .../Creality/CR-8/Configuration_adv.h | 16 +++++++++++++--- .../Creality/Ender-2/Configuration_adv.h | 16 +++++++++++++--- .../Creality/Ender-3/Configuration_adv.h | 16 +++++++++++++--- .../Creality/Ender-4/Configuration_adv.h | 16 +++++++++++++--- .../Felix/Configuration_adv.h | 16 +++++++++++++--- .../FolgerTech/i3-2020/Configuration_adv.h | 16 +++++++++++++--- .../Geeetech/Prusa i3 Pro C/Configuration_adv.h | 16 +++++++++++++--- .../Geeetech/Prusa i3 Pro W/Configuration_adv.h | 16 +++++++++++++--- .../Infitary/i3-M508/Configuration_adv.h | 16 +++++++++++++--- .../JGAurora/A5/Configuration_adv.h | 16 +++++++++++++--- .../Malyan/M150/Configuration_adv.h | 16 +++++++++++++--- .../Micromake/C1/enhanced/Configuration_adv.h | 16 +++++++++++++--- .../RigidBot/Configuration_adv.h | 16 +++++++++++++--- .../SCARA/Configuration_adv.h | 16 +++++++++++++--- .../Sanguinololu/Configuration_adv.h | 16 +++++++++++++--- .../TinyBoy2/Configuration_adv.h | 16 +++++++++++++--- .../Velleman/K8400/Configuration_adv.h | 16 +++++++++++++--- .../Wanhao/Duplicator 6/Configuration_adv.h | 16 +++++++++++++--- .../FLSUN/auto_calibrate/Configuration_adv.h | 16 +++++++++++++--- .../delta/FLSUN/kossel/Configuration_adv.h | 16 +++++++++++++--- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 16 +++++++++++++--- .../delta/generic/Configuration_adv.h | 16 +++++++++++++--- .../delta/kossel_mini/Configuration_adv.h | 16 +++++++++++++--- .../delta/kossel_pro/Configuration_adv.h | 16 +++++++++++++--- .../delta/kossel_xl/Configuration_adv.h | 16 +++++++++++++--- .../gCreate/gMax1.5+/Configuration_adv.h | 16 +++++++++++++--- .../makibox/Configuration_adv.h | 16 +++++++++++++--- .../tvrrug/Round2/Configuration_adv.h | 16 +++++++++++++--- .../wt150/Configuration_adv.h | 16 +++++++++++++--- 41 files changed, 533 insertions(+), 123 deletions(-) diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 704d2a068e..e74167b345 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 0f92acd1a3..9250023780 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index 159e2d2eca..9ce78fad1d 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h index 7a6a8dc294..0200b5349f 100644 --- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h index 0decaf8871..9cfbc8957c 100644 --- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index c1c53725d4..85af155ce6 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index 15bfb09e69..3097bba393 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index c1c53725d4..85af155ce6 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 67e0870db4..006a3c2b92 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index a49b353314..c252c747bc 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h index 4c240c84ee..7bc828566d 100644 --- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h index 0247e32341..310fd684eb 100644 --- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h index e28d4e2a61..9bf4e42446 100644 --- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h index 9ff0967d72..cdce095fe7 100644 --- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h index edd0784c64..080eb374a7 100644 --- a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h index e28d4e2a61..9bf4e42446 100644 --- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 7dd597b526..81c3e731eb 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h index 4395aafe0d..6c7ea1678f 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h index e3955ea4a8..d142240cde 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h index e3955ea4a8..d142240cde 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index 5074482592..1bd26c63a2 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h index 3401d94849..400dbb88f2 100644 --- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h +++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 797a24ebc9..c363f52661 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h index bc8fcee0ee..7b52cb5cfb 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index e0eb35fc8a..4cfc363240 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index b2195b2386..f36e1a94c3 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 15d6e76a92..f0867be9cf 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 1f33e81741..dfc27bd287 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index 4743d8b9a3..483ecd8566 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h index b2a81b4733..b94d844792 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 4ac3278812..3c82c5c55e 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h index 8ea1d74088..dbe611c79a 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 0774e76e9f..1a8de85a37 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 0774e76e9f..1a8de85a37 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 0774e76e9f..1a8de85a37 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 64fe007078..0dc966d18f 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -213,10 +213,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 81bf8e765f..4cac71822d 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index ae85123273..f8dc5b9d8d 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index b41ae0c888..c8e8d053f8 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 54b69487d6..8713fcb3fb 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index df57683770..b327d9bd35 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -208,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder