diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7f0904d2e6..8083c1ea72 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -482,10 +482,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 073ebf672b..a8c964b086 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2110,16 +2110,21 @@ static void clean_up_after_endstop_or_probe_move() {
       planner.bed_level_matrix.set_to_identity();
     #endif
 
-    do_blocking_move_to_z(-(Z_MAX_LENGTH + 10), Z_PROBE_SPEED_FAST);
-    endstops.hit_on_purpose();
-    set_current_from_steppers_for_axis(Z_AXIS);
-    SYNC_PLAN_POSITION_KINEMATIC();
+    #if ENABLED(PROBE_DOUBLE_TOUCH)
+      do_blocking_move_to_z(-(Z_MAX_LENGTH + 10), Z_PROBE_SPEED_FAST);
+      endstops.hit_on_purpose();
+      set_current_from_steppers_for_axis(Z_AXIS);
+      SYNC_PLAN_POSITION_KINEMATIC();
 
-    // move up the retract distance
-    do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), Z_PROBE_SPEED_FAST);
+      // move up the retract distance
+      do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), Z_PROBE_SPEED_FAST);
+    #else
+      // move fast, close to the bed
+      do_blocking_move_to_z(home_bump_mm(Z_AXIS), Z_PROBE_SPEED_FAST);
+    #endif
 
-    // move back down slowly to find bed
-    do_blocking_move_to_z(current_position[Z_AXIS] - home_bump_mm(Z_AXIS) * 2, Z_PROBE_SPEED_SLOW);
+    // move down slowly to find bed
+    do_blocking_move_to_z(current_position[Z_AXIS] -2.0*home_bump_mm(Z_AXIS), Z_PROBE_SPEED_SLOW);
     endstops.hit_on_purpose();
     set_current_from_steppers_for_axis(Z_AXIS);
     SYNC_PLAN_POSITION_KINEMATIC();
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 4f77d4bb25..baaa50efef 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -483,10 +483,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 4be4e79501..37e7a8bd09 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -465,10 +465,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 7399f98fdc..79139204cc 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -463,10 +463,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 8dc9522fdc..e05f316d84 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -475,10 +475,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index bed48247b9..6dab031781 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -476,10 +476,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 49057aea05..7f2906e8fd 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -500,10 +500,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index f53441c748..a078cfab74 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -483,10 +483,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index 3b76fbda12..6f09a5ed9f 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -483,10 +483,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 2dc3555c61..6a39704c55 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -483,10 +483,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 571e3aa168..b2c044321e 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -480,10 +480,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index b6c70ee743..a83d52a8cd 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -491,10 +491,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 54f69f5467..14bb485d99 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -504,10 +504,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 67fc743a99..35b4695a6d 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -474,10 +474,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 80b0715a7e..05dcf15c1a 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -483,10 +483,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 79079193ff..39b9840213 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -525,10 +525,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index e3232022e1..8b17b1ece1 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -525,10 +525,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 873f3c6aa6..825333b711 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -525,10 +525,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index f6a09cac22..d46d9b9edd 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -516,10 +516,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index d3b4bb0d14..f4c0fc5cdc 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -523,10 +523,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 9f9d940650..79f427cfa1 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -486,10 +486,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index a36fb37f02..53739f34a6 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -472,10 +472,12 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
-// Speed for the first approach when probing
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
-// Speed for the second approach when probing
+// Speed for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
 
 //
 // Allen Key Probe is defined in the Delta example configurations.