From aedd58091162ced31f6b1336268b4e4f4b01f531 Mon Sep 17 00:00:00 2001
From: paclema <paclema@gmail.com>
Date: Sun, 3 May 2015 02:28:43 +0200
Subject: [PATCH] Updated all configuration.h examples
---
Marlin/Configuration.h | 2 +-
Marlin/example_configurations/Felix/Configuration.h | 9 ++++++---
Marlin/example_configurations/Felix/Configuration_DUAL.h | 9 ++++++---
Marlin/example_configurations/Hephestos/Configuration.h | 9 ++++++---
Marlin/example_configurations/K8200/Configuration.h | 7 +++++--
Marlin/example_configurations/SCARA/Configuration.h | 9 ++++++---
Marlin/example_configurations/WITBOX/Configuration.h | 9 ++++++---
.../example_configurations/delta/generic/Configuration.h | 9 ++++++---
.../delta/kossel_mini/Configuration.h | 9 ++++++---
Marlin/example_configurations/makibox/Configuration.h | 8 +++++---
.../example_configurations/tvrrug/Round2/Configuration.h | 7 +++++--
11 files changed, 58 insertions(+), 29 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index ce5933319b..535d1319d0 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1,4 +1,4 @@
-#ifndef CONFIGURATION_H
+f#ifndef CONFIGURATION_H
#define CONFIGURATION_H
#include "boards.h"
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 63b3660d54..7ef5228fe4 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -356,9 +356,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index 085d95b271..425608da58 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -356,9 +356,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index c9c079ebe6..a25e8f3f2a 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -377,9 +377,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index d0abbcbe71..2cd07ec73d 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -433,8 +433,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
//===========================================================================
//============================ Mesh Bed Leveling ============================
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index cdc036cb2e..d88aea6c96 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -408,9 +408,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 343c3093ac..1925522bc0 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -376,9 +376,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 9a1fe48756..4324bb4bf7 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -406,9 +406,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 33391863eb..fb2f3aca22 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -406,9 +406,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 918d5fa8bd..6e8286f3af 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -376,9 +376,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
-
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
//===========================================================================
//============================ Manual Bed Leveling ==========================
//===========================================================================
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 2fff0f21e3..43be3262c6 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -378,8 +378,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
// It is assumed that when logic high = filament available
// when logic low = filament ran out
-//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
-//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+#ifdef FILAMENT_RUNOUT_SENSOR
+ const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
//===========================================================================
//============================ Manual Bed Leveling ==========================