diff --git a/Marlin/boards.h b/Marlin/boards.h index c6997fe87b..c63651950f 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -50,10 +50,12 @@ #define BOARD_LEAPFROG 999 // Leapfrog #define BOARD_WITBOX 41 // bq WITBOX #define BOARD_HEPHESTOS 42 // bq Prusa i3 Hephestos +#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers +#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers and Arduino Mega #define BOARD_99 99 // This is in pins.h but...? #define MB(board) (MOTHERBOARD==BOARD_##board) -#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF)) +#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(BAM_DICE) ) #endif //__BOARDS_H diff --git a/Marlin/pins.h b/Marlin/pins.h index ea8f96c48b..ecee6c0acd 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -110,6 +110,8 @@ #include "pins_WITBOX.h" #elif MB(HEPHESTOS) #include "pins_HEPHESTOS.h" +#elif MB(BAM_DICE_DUE) + #include "pins_BAM_DICE_DUE.h" #elif MB(99) #include "pins_99.h" #else diff --git a/Marlin/pins_BAM_DICE_DUE.h b/Marlin/pins_BAM_DICE_DUE.h new file mode 100644 index 0000000000..f9ca27ef74 --- /dev/null +++ b/Marlin/pins_BAM_DICE_DUE.h @@ -0,0 +1,183 @@ +/** + * Arduino Mega with BAM&DICE DUE pin assignments + * + * Applies to the following boards: + * + * BAM&DICE Due with Arduino Mega + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. +#endif + +#define LARGE_FLASH true + +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +#define Y2_STEP_PIN 36 +#define Y2_DIR_PIN 34 +#define Y2_ENABLE_PIN 30 + +#define Z2_STEP_PIN 36 +#define Z2_DIR_PIN 34 +#define Z2_ENABLE_PIN 30 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 + +#define FAN_PIN 9 // (Sprinter config) + +#define PS_ON_PIN 12 + +#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) + #define KILL_PIN 41 +#else + #define KILL_PIN -1 +#endif + +#define HEATER_0_PIN 10 + +#define HEATER_1_PIN -1 + +#define HEATER_2_PIN -1 + +#define TEMP_0_PIN 9 // ANALOG NUMBERING +#define TEMP_1_PIN 11 // ANALOG NUMBERING +#define TEMP_2_PIN -1 // ANALOG NUMBERING + +#define HEATER_BED_PIN 8 // BED + +#define TEMP_BED_PIN 14 // ANALOG NUMBERING + +#ifdef NUM_SERVOS + #define SERVO0_PIN 11 + + #if NUM_SERVOS > 1 + #define SERVO1_PIN 6 + #endif + + #if NUM_SERVOS > 2 + #define SERVO2_PIN 5 + #endif + + #if NUM_SERVOS > 3 + #define SERVO3_PIN 4 + #endif +#endif + + +#ifdef ULTRA_LCD + + #ifdef NEWPANEL + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #ifdef REPRAP_DISCOUNT_SMART_CONTROLLER + #define BEEPER 37 + + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + + #define SDCARDDETECT 49 + #elif defined(LCD_I2C_PANELOLU2) + #define BTN_EN1 47 // reverse if the encoder turns the wrong way. + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + #define SDCARDDETECT -1 + #define KILL_PIN 41 + #elif defined(LCD_I2C_VIKI) + #define BTN_EN1 22 // reverse if the encoder turns the wrong way. + #define BTN_EN2 7 + #define BTN_ENC -1 + #define LCD_SDSS 53 + #define SDCARDDETECT 49 + #else + // arduino pin which triggers an piezzo beeper + #define BEEPER 33 // Beeper on AUX-4 + + // buttons are directly attached using AUX-2 + #ifdef REPRAPWORLD_KEYPAD + #define BTN_EN1 64 // encoder + #define BTN_EN2 59 // encoder + #define BTN_ENC 63 // enter button + #define SHIFT_OUT 40 // shift register + #define SHIFT_CLK 44 // shift register + #define SHIFT_LD 42 // shift register + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 // the click + #endif + + #ifdef G3D_PANEL + #define SDCARDDETECT 49 + #else + #define SDCARDDETECT -1 // Ramps does not use this port + #endif + + #endif + + #else // Old-style panel with shift register + // Arduino pin witch triggers an piezzo beeper + #define BEEPER 33 // No Beeper added + + // Buttons are attached to a shift register + // Not wired yet + // #define SHIFT_CLK 38 + // #define SHIFT_LD 42 + // #define SHIFT_OUT 40 + // #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + #endif +#endif // ULTRA_LCD + +// SPI for Max6675 Thermocouple +#ifndef SDSUPPORT + #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +#ifndef SDSUPPORT + // these pins are defined in the SD library if building with SD support + #define SCK_PIN 52 + #define MISO_PIN 50 + #define MOSI_PIN 51 +#endif