diff --git a/Marlin/pinsDebug.h b/Marlin/pinsDebug.h
index ecd5cd69c2..ad946c59ba 100644
--- a/Marlin/pinsDebug.h
+++ b/Marlin/pinsDebug.h
@@ -733,194 +733,176 @@ static bool PWM_status(uint8_t pin) {
SERIAL_PROTOCOLPGM(" ");
} //PWM_status
-static void PWM_details(uint8_t pin)
-{
+#define WGM_MAKE3(N) ((TEST(TCCR##N##B, WGM##N##2) >> 1) | (TCCR##N##A & (_BV(WGM##N##0) | _BV(WGM##N##1))))
+#define WGM_MAKE4(N) (WGM_MAKE3(N) | (TEST(TCCR##N##B, WGM##N##3) >> 1))
+#define TIMER_PREFIX(T,L,N) do{ \
+ WGM = WGM_MAKE##N(T); \
+ SERIAL_PROTOCOLPGM(" TIMER"); \
+ SERIAL_PROTOCOLPGM(STRINGIFY(T) STRINGIFY(L)); \
+ SERIAL_PROTOCOLPAIR(" WGM: ", WGM); \
+ SERIAL_PROTOCOLPAIR(" TIMSK" STRINGIFY(T) ": ", TIMSK##T); \
+ }while(0)
- uint8_t WGM;
+#define WGM_TEST1 (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6)
+#define WGM_TEST2 (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13)
+
+static void err_is_counter() {
+ SERIAL_PROTOCOLPGM(" Can't ");
+ SERIAL_PROTOCOLPGM("be used as a PWM because ");
+ SERIAL_PROTOCOLPGM("of counter mode");
+}
+static void err_is_interrupt() {
+ SERIAL_PROTOCOLPGM(" Can't ");
+ SERIAL_PROTOCOLPGM("be used as a PWM because ");
+ SERIAL_PROTOCOLPGM("it's ");
+ SERIAL_PROTOCOLPGM("being used as an interrupt");
+}
+static void err_prob_interrupt() {
+ SERIAL_PROTOCOLPGM(" Probably can't ");
+ SERIAL_PROTOCOLPGM("be used as a PWM because ");
+ SERIAL_PROTOCOLPGM("counter/timer is ");
+ SERIAL_PROTOCOLPGM("being used as an interrupt");
+}
+static void can_be_used() { SERIAL_PROTOCOLPGM(" can be used as PWM "); }
+
+static void PWM_details(uint8_t pin) {
+
+ uint8_t WGM;
switch(digitalPinToTimer(pin)) {
-
- #if defined(TCCR0A) && defined(COM0A1)
- case TIMER0A:
- SERIAL_PROTOCOLPGM(" TIMER0A");
- WGM = ((TCCR0B & _BV(WGM02)) >> 1 ) | (TCCR0A & (_BV(WGM00) | _BV(WGM01) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK0: ", TIMSK0);
- if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK0 & _BV(OCIE0A)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK0 & _BV(TOIE0) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER0B:
- SERIAL_PROTOCOLPGM(" TIMER0B");
- WGM = ((TCCR0B & _BV(WGM02)) >> 1 ) | (TCCR0A & (_BV(WGM00) | _BV(WGM01) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK0: ", TIMSK0);
- if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK0 & _BV(OCIE0B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK0 & _BV(TOIE0) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- #endif
- #if defined(TCCR1A) && defined(COM1A1)
- case TIMER1A:
- SERIAL_PROTOCOLPGM(" TIMER1A");
- WGM = ((TCCR1B & (_BV(WGM12) | _BV(WGM13) )) >> 1 ) | (TCCR1A & (_BV(WGM10) | _BV(WGM11) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK1: ", TIMSK1);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK1 & _BV(OCIE1A)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER1B:
- SERIAL_PROTOCOLPGM(" TIMER1B");
- WGM = ((TCCR1B & (_BV(WGM12) | _BV(WGM13) )) >> 1 ) | (TCCR1A & (_BV(WGM10) | _BV(WGM11) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK1: ", TIMSK1);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK1 & _BV(OCIE1B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER1C:
- SERIAL_PROTOCOLPGM(" TIMER1C");
- WGM = ((TCCR1B & (_BV(WGM12) | _BV(WGM13) )) >> 1 ) | (TCCR1A & (_BV(WGM10) | _BV(WGM11) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK1: ", TIMSK1);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK1 & _BV(OCIE1C)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- #endif
+ #if defined(TCCR0A) && defined(COM0A1)
+ case TIMER0A:
+ TIMER_PREFIX(0,A,3);
+ if (WGM_TEST1) err_is_counter();
+ else if (TEST(TIMSK0, OCIE0A)) err_is_interrupt();
+ else if (TEST(TIMSK0, TOIE0)) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER0B:
+ TIMER_PREFIX(0,B,3);
+ if (WGM_TEST1) err_is_counter();
+ else if (TEST(TIMSK0, OCIE0B)) err_is_interrupt();
+ else if (TEST(TIMSK0, TOIE0)) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
- #if defined(TCCR2A) && defined(COM2A1)
- case TIMER2A:
- SERIAL_PROTOCOLPGM(" TIMER2A");
- WGM = ((TCCR2B & _BV(WGM22) ) >> 1 ) | (TCCR2A & (_BV(WGM20) | _BV(WGM21) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK2: ", TIMSK2);
- if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK2 & (_BV(TOIE2) | _BV(OCIE2A))) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK2 & _BV(TOIE2) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER2B:
- SERIAL_PROTOCOLPGM(" TIMER2B");
- WGM = ((TCCR2B & _BV(WGM22) ) >> 1 ) | (TCCR2A & (_BV(WGM20) | _BV(WGM21) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK2: ", TIMSK2);
- if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK2 & _BV(OCIE2B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK2 & _BV(TOIE2) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- #endif
+ #if defined(TCCR1A) && defined(COM1A1)
+ case TIMER1A:
+ TIMER_PREFIX(1,A,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK1, OCIE1A)) err_is_interrupt();
+ else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER1B:
+ TIMER_PREFIX(1,B,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK1, OCIE1B)) err_is_interrupt();
+ else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER1C:
+ TIMER_PREFIX(1,C,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK1, OCIE1C)) err_is_interrupt();
+ else if (TIMSK1 & (_BV(TOIE1) | _BV(ICIE1))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
- #if defined(TCCR3A) && defined(COM3A1)
- case TIMER3A:
- SERIAL_PROTOCOLPGM(" TIMER3A");
- WGM = ((TCCR3B & _BV(WGM32) ) >> 1 ) | (TCCR3A & (_BV(WGM30) | _BV(WGM31) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK3: ", TIMSK3);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK3 & _BV(OCIE3A)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER3B:
- SERIAL_PROTOCOLPGM(" TIMER3B");
- WGM = ((TCCR3B & _BV(WGM32) ) >> 1 ) | (TCCR3A & (_BV(WGM30) | _BV(WGM31) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK3: ", TIMSK3);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK3 & _BV(OCIE3B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER3C:
- SERIAL_PROTOCOLPGM(" TIMER3C");
- WGM = ((TCCR3B & _BV(WGM32) ) >> 1 ) | (TCCR3A & (_BV(WGM30) | _BV(WGM31) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK3: ", TIMSK3);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK3 & _BV(OCIE3C)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- #endif
+ #if defined(TCCR2A) && defined(COM2A1)
+ case TIMER2A:
+ TIMER_PREFIX(2,A,3);
+ if (WGM_TEST1) err_is_counter();
+ else if (TIMSK2 & (_BV(TOIE2) | _BV(OCIE2A))) err_is_interrupt();
+ else if (TEST(TIMSK2, TOIE2)) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER2B:
+ TIMER_PREFIX(2,B,3);
+ if (WGM_TEST1) err_is_counter();
+ else if (TEST(TIMSK2, OCIE2B)) err_is_interrupt();
+ else if (TEST(TIMSK2, TOIE2)) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
- #if defined(TCCR4A)
- case TIMER4A:
- SERIAL_PROTOCOLPGM(" TIMER4A");
- WGM = ((TCCR4B & (_BV(WGM42) | _BV(WGM43) )) >> 1 ) | (TCCR4A & (_BV(WGM40) | _BV(WGM41) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK4: ", TIMSK4);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK4 & _BV(OCIE4A)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER4B:
- SERIAL_PROTOCOLPGM(" TIMER4B");
- WGM = ((TCCR4B & (_BV(WGM42) | _BV(WGM43) )) >> 1 ) | (TCCR4A & (_BV(WGM40) | _BV(WGM41) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK4: ", TIMSK4);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK4 & _BV(OCIE4B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER4C:
- SERIAL_PROTOCOLPGM(" TIMER4C");
- WGM = ((TCCR4B & (_BV(WGM42) | _BV(WGM43) )) >> 1 ) | (TCCR4A & (_BV(WGM40) | _BV(WGM41) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK4: ", TIMSK4);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK4 & _BV(OCIE4C)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
+ #if defined(TCCR3A) && defined(COM3A1)
+ case TIMER3A:
+ TIMER_PREFIX(3,A,3);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK3, OCIE3A)) err_is_interrupt();
+ else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER3B:
+ TIMER_PREFIX(3,B,3);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK3, OCIE3B)) err_is_interrupt();
+ else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER3C:
+ TIMER_PREFIX(3,C,3);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK3, OCIE3C)) err_is_interrupt();
+ else if (TIMSK3 & (_BV(TOIE3) | _BV(ICIE3))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
- #endif
-
- #if defined(TCCR5A) && defined(COM5A1)
- case TIMER5A:
- SERIAL_PROTOCOLPGM(" TIMER5A");
- WGM = ((TCCR5B & (_BV(WGM52) | _BV(WGM53) )) >> 1 ) | (TCCR5A & (_BV(WGM50) | _BV(WGM51) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK5: ", TIMSK5);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK5 & _BV(OCIE5A)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER5B:
- SERIAL_PROTOCOLPGM(" TIMER5B");
- WGM = ((TCCR5B & (_BV(WGM52) | _BV(WGM53) )) >> 1 ) | (TCCR5A & (_BV(WGM50) | _BV(WGM51) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK5: ", TIMSK5);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK5 & _BV(OCIE5B)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- case TIMER5C:
- SERIAL_PROTOCOLPGM(" TIMER5C");
- WGM = ((TCCR5B & (_BV(WGM52) | _BV(WGM53) )) >> 1 ) | (TCCR5A & (_BV(WGM50) | _BV(WGM51) ));
- SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
- SERIAL_PROTOCOLPAIR(" TIMSK5: ", TIMSK5);
- if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because of counter mode");
- else if (TIMSK5 & _BV(OCIE5C)) SERIAL_PROTOCOLPGM(" Can't be used as a PWM because being used to generate an interrupt");
- else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5)) ) SERIAL_PROTOCOLPGM(" Probably can't be used as a PWM because counter/timer being used to generate an interrupt");
- else SERIAL_PROTOCOLPGM(" can be used as PWM ");
- break;
- #endif
+ #ifdef TCCR4A
+ case TIMER4A:
+ TIMER_PREFIX(4,A,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK4, OCIE4A)) err_is_interrupt();
+ else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER4B:
+ TIMER_PREFIX(4,B,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK4, OCIE4B)) err_is_interrupt();
+ else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER4C:
+ TIMER_PREFIX(4,C,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK4, OCIE4C)) err_is_interrupt();
+ else if (TIMSK4 & (_BV(TOIE4) | _BV(ICIE4))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
+
+ #if defined(TCCR5A) && defined(COM5A1)
+ case TIMER5A:
+ TIMER_PREFIX(5,A,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK5, OCIE5A)) err_is_interrupt();
+ else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER5B:
+ TIMER_PREFIX(5,B,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK5, OCIE5B)) err_is_interrupt();
+ else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ case TIMER5C:
+ TIMER_PREFIX(5,C,4);
+ if (WGM_TEST2) err_is_counter();
+ else if (TEST(TIMSK5, OCIE5C)) err_is_interrupt();
+ else if (TIMSK5 & (_BV(TOIE5) | _BV(ICIE5))) err_prob_interrupt();
+ else can_be_used();
+ break;
+ #endif
+
+ case NOT_ON_TIMER: break;
- case NOT_ON_TIMER:
- break;
}
SERIAL_PROTOCOLPGM(" ");
} // PWM_details