diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index ca17b3f9f2..0c07065507 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -676,60 +676,34 @@ ISR(TIMER1_COMPA_vect) {
       #endif //ADVANCE
 
       #define _COUNTER(axis) counter_## axis
-      #define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW)
       #define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP
       #define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN
 
-      #ifdef CONFIG_STEPPERS_TOSHIBA
-        /**
-         * The Toshiba stepper controller require much longer pulses.
-         * So we 'stage' decompose the pulses between high and low
-         * instead of doing each in turn. The extra tests add enough
-         * lag to allow it work with without needing NOPs
-         */
-        #define STEP_ADD(axis, AXIS) \
-         _COUNTER(axis) += current_block->steps[_AXIS(AXIS)]; \
-         if (_COUNTER(axis) > 0) { _WRITE_STEP(AXIS, HIGH); }
-        STEP_ADD(x,X);
-        STEP_ADD(y,Y);
-        STEP_ADD(z,Z);
-        #ifndef ADVANCE
-          STEP_ADD(e,E);
-        #endif
+      #define STEP_ADD(axis, AXIS) \
+        _COUNTER(axis) += current_block->steps[_AXIS(AXIS)]; \
+        if (_COUNTER(axis) > 0) { _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS),0); }
 
-        #define STEP_IF_COUNTER(axis, AXIS) \
-          if (_COUNTER(axis) > 0) { \
-            _COUNTER(axis) -= current_block->step_event_count; \
-            count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \
-            _WRITE_STEP(AXIS, LOW); \
-          }
+      STEP_ADD(x,X);
+      STEP_ADD(y,Y);
+      STEP_ADD(z,Z);
+      #ifndef ADVANCE
+        STEP_ADD(e,E);
+      #endif
 
-        STEP_IF_COUNTER(x, X);
-        STEP_IF_COUNTER(y, Y);
-        STEP_IF_COUNTER(z, Z);
-        #ifndef ADVANCE
-          STEP_IF_COUNTER(e, E);
-        #endif
+      #define STEP_IF_COUNTER(axis, AXIS) \
+        if (_COUNTER(axis) > 0) { \
+          _COUNTER(axis) -= current_block->step_event_count; \
+          count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \
+          _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS),0); \
+        }
 
-      #else // !CONFIG_STEPPERS_TOSHIBA
+      STEP_IF_COUNTER(x, X);
+      STEP_IF_COUNTER(y, Y);
+      STEP_IF_COUNTER(z, Z);
+      #ifndef ADVANCE
+        STEP_IF_COUNTER(e, E);
+      #endif
 
-        #define APPLY_MOVEMENT(axis, AXIS) \
-          _COUNTER(axis) += current_block->steps[_AXIS(AXIS)]; \
-          if (_COUNTER(axis) > 0) { \
-            _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS),0); \
-            _COUNTER(axis) -= current_block->step_event_count; \
-            count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \
-            _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS),0); \
-          }
-
-        APPLY_MOVEMENT(x, X);
-        APPLY_MOVEMENT(y, Y);
-        APPLY_MOVEMENT(z, Z);
-        #ifndef ADVANCE
-          APPLY_MOVEMENT(e, E);
-        #endif
-
-      #endif // CONFIG_STEPPERS_TOSHIBA
       step_events_completed++;
       if (step_events_completed >= current_block->step_event_count) break;
     }
@@ -1024,6 +998,7 @@ void st_init() {
 #endif
 
   #define _STEP_INIT(AXIS) AXIS ##_STEP_INIT
+  #define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW)
   #define _DISABLE(axis) disable_## axis()
 
   #define AXIS_INIT(axis, AXIS, PIN) \