diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED
new file mode 100644
index 0000000000..5ea008b4ad
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED
@@ -0,0 +1,302 @@
+/**
+ * \file
+ *
+ * \brief USB configuration file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _CONF_USB_H_
+#define _CONF_USB_H_
+
+#undef UNUSED /* To avoid a macro clash as macros.h already defines it */
+#include "../../../core/macros.h" /* For ENABLED()/DISABLED() */
+#include "../../../../Configuration.h" /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
+#include "compiler.h"
+
+
+/**
+ * USB Device Configuration
+ * @{
+ */
+
+//! Device definition (mandatory)
+#define USB_DEVICE_VENDOR_ID 0x03EB /* ATMEL VID */
+#define USB_DEVICE_PRODUCT_ID 0x2424 /* MSC / CDC */
+#define USB_DEVICE_MAJOR_VERSION 1
+#define USB_DEVICE_MINOR_VERSION 0
+#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
+#define USB_DEVICE_ATTR \
+ (USB_CONFIG_ATTR_SELF_POWERED)
+// (USB_CONFIG_ATTR_BUS_POWERED)
+// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
+// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
+
+//! USB Device string definitions (Optional)
+#define USB_DEVICE_MANUFACTURE_NAME "marlinfw.org"
+#ifdef CUSTOM_MACHINE_NAME
+ #define USB_DEVICE_PRODUCT_NAME CUSTOM_MACHINE_NAME
+#else
+ #define USB_DEVICE_PRODUCT_NAME "3D Printer"
+#endif
+#define USB_DEVICE_SERIAL_NAME "123985739853"
+
+/**
+ * Device speeds support
+ * Low speed not supported by CDC and MSC
+ * @{
+ */
+
+//! To define a Low speed device
+//#define USB_DEVICE_LOW_SPEED
+
+//! To define a Full speed device
+//#define USB_DEVICE_FULL_SPEED
+
+
+//! To authorize the High speed
+#ifndef USB_DEVICE_FULL_SPEED
+ #if (UC3A3||UC3A4)
+ //# define USB_DEVICE_HS_SUPPORT
+ #elif (SAM3XA||SAM3U)
+ //# define USB_DEVICE_HS_SUPPORT
+ #endif
+#endif
+//@}
+
+
+/**
+ * USB Device Callbacks definitions (Optional)
+ * @{
+ */
+#define UDC_VBUS_EVENT(b_vbus_high)
+#define UDC_SOF_EVENT()
+#define UDC_SUSPEND_EVENT()
+#define UDC_RESUME_EVENT()
+#define UDC_GET_EXTRA_STRING() usb_task_extra_string()
+#define USB_DEVICE_SPECIFIC_REQUEST() usb_task_other_requests()
+//@}
+
+/**
+ * USB Device low level configuration
+ * When only one interface is used, these configurations are defined by the class module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Control endpoint size
+#define USB_DEVICE_EP_CTRL_SIZE 64
+
+//! Two interfaces for this device (CDC COM + CDC DATA + MSC)
+#define USB_DEVICE_NB_INTERFACE 3
+
+//! 5 endpoints used by CDC and MSC interfaces
+#if SAM3U
+// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
+// (6 | USB_EP_DIR_IN) // CDC TX
+// (5 | USB_EP_DIR_OUT) // CDC RX
+// (1 | USB_EP_DIR_IN) // MSC IN
+// (2 | USB_EP_DIR_OUT) // MSC OUT
+# define USB_DEVICE_MAX_EP 6
+# if defined(USB_DEVICE_HS_SUPPORT)
+// In HS mode, size of bulk endpoints are 512
+// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+# define UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2)
+#endif
+#else
+// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
+// (4 | USB_EP_DIR_IN) // CDC TX
+// (5 | USB_EP_DIR_OUT) // CDC RX
+// (1 | USB_EP_DIR_IN) // MSC IN
+// (2 | USB_EP_DIR_OUT) // MSC OUT
+# define USB_DEVICE_MAX_EP 5
+# if SAM3XA && defined(USB_DEVICE_HS_SUPPORT)
+// In HS mode, size of bulk endpoints are 512
+// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+# define UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2)
+# endif
+#endif
+//@}
+
+//@}
+
+
+/**
+ * USB Interface Configuration
+ * @{
+ */
+/**
+ * Configuration of CDC interface
+ * @{
+ */
+
+//! Define one USB communication ports
+#define UDI_CDC_PORT_NB 1
+
+//! Interface callback definition
+#define UDI_CDC_ENABLE_EXT(port) usb_task_cdc_enable(port)
+#define UDI_CDC_DISABLE_EXT(port) usb_task_cdc_disable(port)
+#define UDI_CDC_RX_NOTIFY(port) usb_task_cdc_rx_notify(port)
+#define UDI_CDC_TX_EMPTY_NOTIFY(port)
+#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_task_cdc_config(port,cfg)
+#define UDI_CDC_SET_DTR_EXT(port,set) usb_task_cdc_set_dtr(port,set)
+#define UDI_CDC_SET_RTS_EXT(port,set)
+
+//! Define it when the transfer CDC Device to Host is a low rate (<512000 bauds)
+//! to reduce CDC buffers size
+//#define UDI_CDC_LOW_RATE
+
+//! Default configuration of communication port
+#define UDI_CDC_DEFAULT_RATE 115200
+#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+#define UDI_CDC_DEFAULT_DATABITS 8
+
+//! Enable id string of interface to add an extra USB string
+#define UDI_CDC_IAD_STRING_ID 4
+
+/**
+ * USB CDC low level configuration
+ * In standalone these configurations are defined by the CDC module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Endpoint numbers definition
+#if SAM3U
+# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+# define UDI_CDC_DATA_EP_IN_0 (6 | USB_EP_DIR_IN) // TX
+# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
+#else
+# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+# define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
+# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
+#endif
+
+//! Interface numbers
+#define UDI_CDC_COMM_IFACE_NUMBER_0 0
+#define UDI_CDC_DATA_IFACE_NUMBER_0 1
+//@}
+//@}
+
+
+/**
+ * Configuration of MSC interface
+ * @{
+ */
+//! Vendor name and Product version of MSC interface
+#define UDI_MSC_GLOBAL_VENDOR_ID \
+ 'M', 'A', 'R', 'L', 'I', 'N', '3', 'D'
+#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
+ '1', '.', '0', '0'
+
+//! Interface callback definition
+#define UDI_MSC_ENABLE_EXT() usb_task_msc_enable()
+#define UDI_MSC_DISABLE_EXT() usb_task_msc_disable()
+
+//! Enable id string of interface to add an extra USB string
+#define UDI_MSC_STRING_ID 5
+
+/**
+ * USB MSC low level configuration
+ * In standalone these configurations are defined by the MSC module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Endpoint numbers definition
+#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
+#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
+
+//! Interface number
+#define UDI_MSC_IFACE_NUMBER 2
+//@}
+//@}
+
+//@}
+
+
+/**
+ * Description of Composite Device
+ * @{
+ */
+//! USB Interfaces descriptor structure
+#define UDI_COMPOSITE_DESC_T \
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ udi_msc_desc_t udi_msc
+
+//! USB Interfaces descriptor value for Full Speed
+#define UDI_COMPOSITE_DESC_FS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ .udi_msc = UDI_MSC_DESC_FS
+
+//! USB Interfaces descriptor value for High Speed
+#define UDI_COMPOSITE_DESC_HS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ .udi_msc = UDI_MSC_DESC_HS
+
+//! USB Interface APIs
+#define UDI_COMPOSITE_API \
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ &udi_api_msc
+//@}
+
+
+/**
+ * USB Device Driver Configuration
+ * @{
+ */
+//@}
+
+//! The includes of classes and other headers must be done at the end of this file to avoid compile error
+#include "udi_cdc.h"
+#include "udi_msc.h"
+#include "usb_task.h"
+
+#endif // _CONF_USB_H_