diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index fb49566367..2f3a132c9a 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -198,6 +198,7 @@ #define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed) #define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) #define BOARD_MKS_SGEN 1763 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_MKS_SGEN_L 1764 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan) // // SAM3X8E ARM Cortex M3 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index f6415c6346..31569a6f49 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -324,6 +324,8 @@ #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768 #elif MB(MKS_SGEN) #include "pins_MKS_SGEN.h" // LPC1769 env:LPC1769 +#elif MB(MKS_SGEN_L) + #include "pins_MKS_SGEN_L.h" // LPC1768 env:LPC1768 #elif MB(AZSMZ_MINI) #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768 #elif MB(AZTEEG_X5_GT) diff --git a/Marlin/src/pins/pins_MKS_SGEN_L.h b/Marlin/src/pins/pins_MKS_SGEN_L.h new file mode 100644 index 0000000000..bc5c3e0a23 --- /dev/null +++ b/Marlin/src/pins/pins_MKS_SGEN_L.h @@ -0,0 +1,281 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +/** + * MKS SGEN-L pin assignments + */ + +#ifndef TARGET_LPC1768 + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_NAME "MKS SGEN-L" +#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN_L" + +// +// Servo pin +// +#define SERVO0_PIN P1_23 // SERVO P1.23 +#define SERVO1_PIN P2_00 // SERVO P2.0 + +// +// Limit Switches +// +#define X_MIN_PIN P1_29 +#define X_MAX_PIN P1_28 +#define Y_MIN_PIN P1_27 +#define Y_MAX_PIN P1_26 +#define Z_MIN_PIN P1_25 +#define Z_MAX_PIN P1_24 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P1_24 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_03 +#define X_ENABLE_PIN P2_01 +#ifndef X_CS_PIN + #define X_CS_PIN P1_01 +#endif + +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_08 +#endif + +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_10 +#endif + +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_15 +#endif + +#define E1_STEP_PIN P0_01 +#define E1_DIR_PIN P0_00 +#define E1_ENABLE_PIN P0_10 +#ifndef E1_CS_PIN + #define E1_CS_PIN P1_17 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #define TMC_SW_MOSI P4_28 + #define TMC_SW_MISO P0_05 + #define TMC_SW_SCK P0_04 +#endif + +#if HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209) + /** + * TMC2208 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN P1_04 + #define X_SERIAL_RX_PIN P1_01 + + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_08 + + #define Z_SERIAL_TX_PIN P1_14 + #define Z_SERIAL_RX_PIN P1_10 + + #define E0_SERIAL_TX_PIN P1_16 + #define E0_SERIAL_RX_PIN P1_15 + + #define E1_SERIAL_TX_PIN P4_29 + #define E1_SERIAL_RX_PIN P1_17 + + #define Z2_SERIAL_TX_PIN P4_29 + #define Z2_SERIAL_RX_PIN P1_17 + +#endif // TMC2208 || TMC2209 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN 0 // Analog Input A0 (TH1) +#define TEMP_BED_PIN 1 // Analog Input A1 (TB) +#define TEMP_1_PIN 2 // Analog Input A2 (TH2) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Misc. Functions +// +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 + +/** + * _____ _____ + * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK) + * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2) + * (LCD_D4) 0.15 | · · | 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · | 1.20 (SD_MOSI) + * (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST + * GND | · · | 5V GND | · · | NC + * ----- ----- + * EXP1 EXP2 + */ +#if ENABLED(ULTRA_LCD) + #define BEEPER_PIN P1_31 + #define BTN_ENC P1_30 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS P1_0 + + #define BTN_EN1 P0_18 + #define BTN_EN2 P0_15 + + #define LCD_PINS_ENABLE P1_22 + #define LCD_PINS_D4 P0_17 + + #else + #define LCD_PINS_RS P0_16 + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + + #define LCD_SDSS P0_28 + #define SD_DETECT_PIN P0_27 + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS P0_18 + #define DOGLCD_A0 P0_16 + #define DOGLCD_SCK P0_7 + #define DOGLCD_MOSI P1_20 + #define FORCE_SOFT_SPI + + #define LCD_BACKLIGHT_PIN -1 + + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN P0_17 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN P1_0 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN P1_22 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN P0_17 + #endif + + #else // !FYSETC_MINI_12864 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS P0_17 + #define DOGLCD_A0 P1_0 + #endif + + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 P0_17 + #define LCD_PINS_D6 P1_0 + #define LCD_PINS_D7 P1_22 + #endif + + #endif // !FYSETC_MINI_12864 + + #endif + +#endif // ULTRA_LCD + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN P0_28 +#elif SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// Other Pins +// +//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PS_ON_PIN P1_23 // SERVO P1.23