/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ /** * Aragonese * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_AN_H #define LANGUAGE_AN_H #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " parada." #define MSG_SD_INSERTED "Tarcheta mesa" #define MSG_SD_REMOVED "Tarcheta sacada" #define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #define MSG_MAIN "Menu prencipal" #define MSG_AUTOSTART "Inicio automatico" #define MSG_DISABLE_STEPPERS "Amortar motors" #define MSG_AUTO_HOME "Levar a l'orichen" #define MSG_AUTO_HOME_X "Orichen X" #define MSG_AUTO_HOME_Y "Orichen Y" #define MSG_AUTO_HOME_Z "Orichen Z" #define MSG_LEVEL_BED_HOMING "Orichen XYZ" #define MSG_LEVEL_BED_WAITING "Encetar (pretar)" #define MSG_LEVEL_BED_NEXT_POINT "Vinient punto" #define MSG_LEVEL_BED_DONE "Nivelacion feita!" #define MSG_LEVEL_BED_CANCEL "Cancelar" #define MSG_SET_HOME_OFFSETS "Achustar desfases" #define MSG_HOME_OFFSETS_APPLIED "Desfase aplicau" #define MSG_SET_ORIGIN "Establir orichen" #define MSG_PREHEAT_1 "Precalentar PLA" #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Tot" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Base" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Conf" #define MSG_PREHEAT_2 "Precalentar ABS" #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Tot" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Base" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Conf" #define MSG_COOLDOWN "Enfriar" #define MSG_SWITCH_PS_ON "Enchegar Fuent" #define MSG_SWITCH_PS_OFF "Amortar Fuent" #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Retraer" #define MSG_MOVE_AXIS "Mover Eixes" #define MSG_LEVEL_BED "Nivelar base" #define MSG_MOVE_X "Mover X" #define MSG_MOVE_Y "Mover Y" #define MSG_MOVE_Z "Mover Z" #define MSG_MOVE_E "Extrusor" #define MSG_MOVE_01MM "Mover 0.1mm" #define MSG_MOVE_1MM "Mover 1mm" #define MSG_MOVE_10MM "Mover 10mm" #define MSG_SPEED "Velocidat" #define MSG_BED_Z "Base Z" #define MSG_NOZZLE "Boquilla" #define MSG_BED "Base" #define MSG_FAN_SPEED "Ixoriador" #define MSG_FLOW "Fluxo" #define MSG_CONTROL "Control" #define MSG_MIN LCD_STR_THERMOMETER " Min" #define MSG_MAX LCD_STR_THERMOMETER " Max" #define MSG_FACTOR LCD_STR_THERMOMETER " Fact" #define MSG_AUTOTEMP "Temperatura Auto." #define MSG_ON "On" #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_SELECT "Trigar" #define MSG_ACC "Aceleracion" #define MSG_VX_JERK "Vx-jerk" #define MSG_VY_JERK "Vy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "Vel. viache min" #define MSG_AMAX "Acel. max" #define MSG_A_RETRACT "Acel. retrac." #define MSG_A_TRAVEL "Acel. Viaje" #define MSG_XSTEPS "X trangos/mm" #define MSG_YSTEPS "Y trangos/mm" #define MSG_ZSTEPS "Z trangos/mm" #define MSG_ESTEPS "E trangos/mm" #define MSG_E1STEPS "E1 trangos/mm" #define MSG_E2STEPS "E2 trangos/mm" #define MSG_E3STEPS "E3 trangos/mm" #define MSG_E4STEPS "E4 trangos/mm" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contraste" #define MSG_STORE_EPROM "Alzar memoria" #define MSG_LOAD_EPROM "Cargar memoria" #define MSG_RESTORE_FAILSAFE "Restaurar memoria" #define MSG_REFRESH "Tornar a cargar" #define MSG_WATCH "Informacion" #define MSG_PREPARE "Preparar" #define MSG_TUNE "Achustar" #define MSG_PAUSE_PRINT "Pausar impresion" #define MSG_RESUME_PRINT "Contin. impresion" #define MSG_STOP_PRINT "Detener Impresion" #define MSG_CARD_MENU "Menu de SD" #define MSG_NO_CARD "No i hai tarcheta" #define MSG_DWELL "Reposo..." #define MSG_USERWAIT "Aguardand ordines" #define MSG_RESUMING "Contin. impresion" #define MSG_PRINT_ABORTED "Impres. cancelada" #define MSG_NO_MOVE "Sin movimiento" #define MSG_KILLED "Aturada d'emerch." #define MSG_STOPPED "Aturada." #define MSG_CONTROL_RETRACT "Retraer mm" #define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm" #define MSG_CONTROL_RETRACTF "Retraer F" #define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_AUTORETRACT "Retraccion auto." #define MSG_FILAMENTCHANGE "Cambear filamento" #define MSG_INIT_SDCARD "Encetan. tarcheta" #define MSG_CNG_SDCARD "Cambiar tarcheta" #define MSG_ZPROBE_OUT "Sonda Z fuera" #define MSG_BLTOUCH_SELFTEST "BLTouch Auto-Test" #define MSG_BLTOUCH_RESET "Reset BLTouch" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "first" #define MSG_ZPROBE_ZOFFSET "Desfase Z" #define MSG_BABYSTEP_X "Micropaso X" #define MSG_BABYSTEP_Y "Micropaso Y" #define MSG_BABYSTEP_Z "Micropaso Z" #define MSG_ENDSTOP_ABORT "Cancelado - Endstop" #define MSG_HEATING_FAILED_LCD "Error: en calentar" #define MSG_ERR_REDUNDANT_TEMP "Error: temperatura" #define MSG_THERMAL_RUNAWAY "Error de temperatura" #define MSG_ERR_MAXTEMP "Error: Temp Maxima" #define MSG_ERR_MINTEMP "Error: Temp Menima" #define MSG_ERR_MAXTEMP_BED "Error: Temp Max base" #define MSG_ERR_MINTEMP_BED "Error: Temp Min base" #define MSG_ERR_Z_HOMING "G28 Z vedau" #define MSG_HALTED "IMPRESORA ATURADA" #define MSG_PLEASE_RESET "Per favor reinic." #define MSG_SHORT_DAY "d" #define MSG_SHORT_HOUR "h" #define MSG_SHORT_MINUTE "m" #define MSG_HEATING "Calentando..." #define MSG_HEATING_COMPLETE "Calentamiento listo" #define MSG_BED_HEATING "Calentando base..." #define MSG_BED_DONE "Base calient" #define MSG_DELTA_CALIBRATE "Calibracion Delta" #define MSG_DELTA_CALIBRATE_X "Calibrar X" #define MSG_DELTA_CALIBRATE_Y "Calibrar Y" #define MSG_DELTA_CALIBRATE_Z "Calibrar Z" #define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro" #define MSG_INFO_MENU "Inf. Impresora" #define MSG_INFO_PRINTER_MENU "Inf. Impresora" #define MSG_INFO_STATS_MENU "Estadisticas Imp." #define MSG_INFO_BOARD_MENU "Inf. Controlador" #define MSG_INFO_THERMISTOR_MENU "Termistors" #define MSG_INFO_EXTRUDERS "Extrusors" #define MSG_INFO_BAUDRATE "Baudios" #define MSG_INFO_PROTOCOL "Protocolo" #define MSG_LIGHTS_ON "Enchegar luz" #define MSG_LIGHTS_OFF "Desenchegar luz" #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT "Conteo de impresion" #define MSG_INFO_COMPLETED_PRINTS "Completadas" #define MSG_INFO_PRINT_TIME "Tiempo total d'imp." #define MSG_INFO_PRINT_LONGEST "Impresion mas larga" #define MSG_INFO_PRINT_FILAMENT "Total d'extrusion" #else #define MSG_INFO_PRINT_COUNT "Impresions" #define MSG_INFO_COMPLETED_PRINTS "Completadas" #define MSG_INFO_PRINT_TIME "Total" #define MSG_INFO_PRINT_LONGEST "Mas larga" #define MSG_INFO_PRINT_FILAMENT "Extrusion" #endif #define MSG_INFO_MIN_TEMP "Temperatura menima" #define MSG_INFO_MAX_TEMP "Temperatura maxima" #define MSG_INFO_PSU "Fuente de aliment" #define MSG_DRIVE_STRENGTH "Fuerza d'o driver" #define MSG_DAC_PERCENT "Driver %" #define MSG_DAC_EEPROM_WRITE "Escri. DAC EEPROM" #define MSG_FILAMENT_CHANGE_HEADER "Cambear filamento" #define MSG_FILAMENT_CHANGE_OPTION_HEADER "Opcion de cambio:" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mas" #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resumir imp." // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #define MSG_FILAMENT_CHANGE_INIT_1 "Aguardand iniciar" #define MSG_FILAMENT_CHANGE_INSERT_1 "Meta o filamento" #define MSG_FILAMENT_CHANGE_INSERT_2 "y prete lo boton" #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_2 "d'o filamento" #define MSG_FILAMENT_CHANGE_INIT_3 "cambear" #define MSG_FILAMENT_CHANGE_INSERT_3 "pa continar..." #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_2 "d'o fil. cambear" #define MSG_FILAMENT_CHANGE_INSERT_1 "Meta o filamento" #endif // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Aguardando a" #define MSG_FILAMENT_CHANGE_UNLOAD_2 "expulsar filament" #define MSG_FILAMENT_CHANGE_LOAD_1 "Aguardando a" #define MSG_FILAMENT_CHANGE_LOAD_2 "cargar filamento" #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Aguardando a" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extruir filamento" #define MSG_FILAMENT_CHANGE_RESUME_1 "Aguardando impre." #define MSG_FILAMENT_CHANGE_RESUME_2 "pa continar" #endif // LANGUAGE_AN_H