diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 54e92b6823..da21909d60 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 387a74d7d3..a6629e2f27 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 3644a5a03a..a4d4223a9b 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 9b8a0bbc14..e4bc9f9a9c 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 148ea99cfd..1c0990470f 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -714,7 +714,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 0f1fed6540..eb07d017ef 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -714,7 +714,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index f88a6d3819..4a8120a35a 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 77808f1a48..0f7595a0a2 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index e41cbfd52f..1f8030ff24 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 60387c7ac3..10947ae0c3 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 7da18a6b2c..dba8b5e51e 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 80d2243206..e8d273c143 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -658,7 +658,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index efcaccb447..922d81e28f 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -658,7 +658,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 15336ca92d..720e455e45 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 884c9edc1e..0a7cdc0b32 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index e91338faba..a0dbd7fe7b 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 2833e6bfa5..d6ba96cdcf 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index d7b2c879b9..ea607b0ac3 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 03ef0d5ca9..8a34813df6 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 729a65b6c6..2843260e37 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 454be5a923..5006075cb0 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index f4905e0510..61cc07fdee 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 7073fb2dc7..90332c775c 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 10811336c7..c288f76b77 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index f7bba29b11..1b37a900a0 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -660,7 +660,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 9d5ee669b2..7b0cd4ea79 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index b48046ef61..2c467a8b96 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index d44379b506..4873098a8c 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 79193db626..e31cccf814 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -679,7 +679,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index a93ec91997..2aa7ee8f2a 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 0a8f39dee6..bb82b146f9 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 3c7f7ecbd5..26d162ad14 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index d71650b2bc..c6848ac09e 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index a67a1465ab..69e0868273 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 7fe173bcba..0b02469679 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index eccffd3a85..f3c7d37a2e 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -666,7 +666,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 39d2c5d666..1e120ea686 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 36450c3664..a7abe7a776 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 02dbb6ccbb..3fa1a9cce5 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index dcecc7485a..edfb2534aa 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index b34bd02877..ee3b811a4c 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index 85dd63bfad..de610fdb7c 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index 0c21295d67..7138b3366d 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 82f0672c3c..e3c535af57 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index a5c971b10f..75bafeb9dc 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -663,7 +663,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) #define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 84d93956fd..ba20ad34a6 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 2900868391..786110ada6 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index d9ad0e3da6..2f96ec1409 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -669,7 +669,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index cc05ef2d9c..a35bb61210 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 65def4f2a5..4fc7cd3a22 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 8aba2171c7..1a6520b215 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index f216c11fe8..50feef0a55 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 3894f7aebe..a3c5781974 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -667,7 +667,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index e3c6dce4f8..76a9e1d511 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 599dcb94a8..57b909aab5 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index a6f9047c3c..7517f9f001 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 94deef7bbb..fc6bba5e37 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -665,7 +665,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index c8d598f73f..363354007a 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -665,7 +665,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index edfa781702..7f03b815d9 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 4f9104b145..3229383764 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 9cbd5508b1..dabc789d10 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 711f194767..0469ec3c0f 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index bfe02f6238..155aecd387 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index ce6747a9b1..e973da77a8 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index e7ab2a9444..fea8024533 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -663,7 +663,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index dd991bf223..ab255cfcd5 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -663,7 +663,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index ff5867e240..24c0199299 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index a10f38e1e7..360afbf821 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 621d11d1ea..010df9a333 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 90013506da..9c0fdaa4c0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index e69d1203d4..044ea97531 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 36d8502995..9e41996ea1 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index c9cec98da1..efa226b2a2 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 6b94de46af..0197aa3687 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 98ad093868..7956096385 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index e55cf499ec..1e1a7bf56d 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 8f294fe851..9049319b6b 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index f4ac02fdb4..e21313db2e 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 2487554db6..cc5985e86f 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 20a47f7839..1bf6fad7c9 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index e9cd71a44b..82f12ebad4 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 2243bc227e..67a880b4f2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 4858bb1391..85b71f1146 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 07500495a5..80d6f4c174 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index f341b4e072..79e9db9c19 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 8aa89b2388..9d83c21021 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 20a2c91779..e5ad7cc46a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 77b6b3a98e..212661ba62 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index c292f52ed3..63f7916e3c 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 3fb1bda18d..764806bf85 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 41214c4eda..ae2a26348a 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 5f18075161..b6d8ef88fa 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 10754f5d1a..b0a5551ce9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index d2f80700d1..0d4c4da24f 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index c9a13bb346..632880633b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index e1d8a97615..0c8e112d40 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 2b45af161b..bc00b5bb81 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 70fb1feec6..9b266f836a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 812b62f348..af5f9037cf 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 1fc720e566..ea022a345d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 3fbee5f459..51a23878a3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index f4ad9923f0..edbfa71b2f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 3bdaa635c4..d83eb613f3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 1c9328ebad..fffdde356f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 591d01b42d..75b0e0c959 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index d9bd98bb79..d903b0a999 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index f928635a74..59bfa37dd8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 1955b24710..fafe12c2ef 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index d9a2407320..a36b124070 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index b87162e0eb..06e6efc6df 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 1661d91253..aa398d7875 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 54fd61e987..d98f97654f 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index ef4082af4b..49b9b4050d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index d564a35cbd..3c3cae91c5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 8abc915829..1726c3891a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 2ab57c3d1f..6969588d2f 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 7556aee5cc..f3990ae7fe 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index e69b249643..1f293e519e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index a8ec373604..ef73abfdd1 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index ffb45000fa..6a729fcb57 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 6bac7cb000..77c00d9c95 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index cd7e1f62ac..0d31ecf6a9 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index ee364528d8..fce2912a06 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 0aba8449b4..7c93c958cc 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 9dcf3966d7..acba9e50a7 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index fa5f0ce622..449b6126dd 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 427c634076..130ad9cc32 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 4e2a329ac4..675e4eafd5 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 1e8416cea1..e4ef217fb0 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 110d2a2d1d..b7bf272b9d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index d594835b6e..c6d83db3ce 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 517a287336..426293fb6c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 17b5ec66de..badbce9e53 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 0f06c3a6cd..e93158a830 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index d0d36ddca8..01e324f34d 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -658,7 +658,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index d915284521..777f7c509a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 17f885dc24..8317f9aa27 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 85e29f9f76..8a79654872 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index be6a91aba2..a19772b21d 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 7d9f265ffe..358d8ada7f 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 1e33726457..99a75b46cd 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -691,7 +691,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index d36cde5382..cd19f2cb49 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -663,7 +663,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 3b0361ba2a..4d4eb25a3d 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index c3dda02903..70c5b36150 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 5743e67820..28fb43e22f 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 9e461b8b54..435adda688 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index bc0c5decf0..661432e911 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 6ee7e979b1..2c2131d2a2 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 52b2758514..1723e47ff9 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index d54c80054f..b00831eceb 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 33b79e1955..1ccaf6ee78 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 25dcca8345..9e4e41f883 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index a024f02acd..6c463a14cb 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index f8102d1161..885bf4f7d6 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 8f4b4ea221..f216e1fc7d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 344df8d021..cf646804a0 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -714,7 +714,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 58e958e3c0..cf1394b77f 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index d102ba2192..7a8e28b177 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 23d932435c..fba26ecf84 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index bb0094ec86..8c8e7ca87d 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 68672fcb4b..10f5dbff1a 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index d1804d8cdf..364e30f952 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index ffae3b0d53..6684e21074 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 72d4060fca..bd1d122c27 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 776beb7b72..993c8a9d29 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index adae966649..3d6630e601 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index f5a5da1072..4b6e16f9b9 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 5cc3109333..f9c857939d 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 5d153b93f6..92c60b58f1 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index d94395367a..0fa1baa479 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 72d1e380ec..2f8c38cb53 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 9f54e1ff8b..9398a769d3 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index bef672984c..f27b0315c0 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 8fe1ef3b23..ec0d671bb8 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 82cc74f60a..515be7c38c 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index d30a69284b..58d9fbb914 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 0644b2bb8d..05c39f7628 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index fa3e36cbcd..b0da610ebb 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 8fd7c2d8b9..671ff72c6d 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 28e03d01c0..90b89dc44e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 2eb64748d2..3505afc400 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index fa67878ff3..ed4a7cc4c9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 784470b592..be3bffd97d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 05c1d3fff1..b01f1b6f1e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 311d39d6bb..73ebc909cc 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index e222aa9208..e1eed103eb 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -653,7 +653,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 06ae1832c5..827cc79bff 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 1a8cc9fb69..b34df4b970 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index f437b556d6..62caa788ce 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 6ef5123c4e..c5a29f7ca0 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index b052650d10..7a90526259 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index e469f0007a..0e290d9c89 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 98f6454b92..3291826733 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index c27a51d700..f5fef880f6 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index e64a08b36b..e30878cb08 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index be139b8f0a..4a43f779c1 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index a7245aa668..c3932c6a7c 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 4bdfd5d71e..03fa035be8 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 625bf87584..468701aafe 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 50ee734ad7..3b8b024b64 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 4eee1b9d78..ba1b95ab16 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -664,7 +664,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 8331fcf93e..b5fe4cc70f 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 375b8d6c87..4ae3af532c 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 1b4df14cc8..9f083b933e 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index cb761cd5db..4188f731f6 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 7d816af5d7..e359fb5176 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 2ad4bd0782..088dc0e83d 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index ef958b3055..1ed3706958 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 609d4ef83d..703459b84b 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 16108dbbf9..26fc33337f 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index ba263bf674..5bca4a8d91 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 9961ed5205..0e6ac476d9 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 06b4180181..d2667219ff 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 2bce17422a..fcb8a1f6e4 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index b8e57bb1d1..d1738cc32a 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 5a35c4b38e..689d43ab9d 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 773a4c9d62..49e325c5a2 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -679,7 +679,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 2d967358a5..70e99f6a99 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -672,7 +672,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 23c49dd9f5..bf513d3315 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 6d2ff06caf..937866b5ca 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 0c577d0267..610840604e 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 85ec415a57..ab08bf6a9c 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -660,7 +660,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index cd94770e05..89ec1b0541 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -660,7 +660,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 6f354fd7ff..61a972055b 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -660,7 +660,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 67c6b8dcfe..a35202377b 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 7d0d5d3f98..cf1b4a8f01 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index ed9653343d..f628935ba1 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -668,7 +668,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index ac53f8f87a..859b1be6bd 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index f2f2ea50df..7943c95143 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index c9b9f73b9b..fdd3fc40b5 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index b9910c26ea..3434eb59c5 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 984d282bb4..08574d496a 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index e10e9655c1..8ab5e86349 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index f4d6a41319..7430ab6ae3 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -670,7 +670,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 8dde64d3f5..d49d8a9460 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index d231f5c728..0e2a97ecb1 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 781db5e9d6..c316053057 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index bc83249b35..5b5a87167e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index c3561bf091..4318550509 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 99c769a09d..9e352b3122 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 5eebc3f284..7e35dce7d5 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index c49ce71074..c172efbecb 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 617200f5bd..f37fefe441 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index efd9238b67..7d0d2cc303 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 388ed4c456..2afa19b8e6 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 4ccdcc5969..7173f0016d 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 4d8038c4c2..2cf41e533b 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -689,7 +689,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 89812f6731..09e4a458ff 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 902f57a072..8896cd1f08 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 8ac0a0b38f..59612b8e77 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -664,7 +664,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index b778a4d77d..483d2b62f7 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 22e75cff53..f2ab4681f0 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 11d7c7703d..edb201290c 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 062de674a3..a79acb6865 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 8e794ae98e..b85ee9ffd7 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 16db20d788..d42ac1bed0 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -669,7 +669,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 7e436bdeed..13a1fbf523 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -670,7 +670,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 9bf81d5b58..bb249a599f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -669,7 +669,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 3f5f59b7b7..4d6d6f95ef 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 1b608fedf3..9bae8988d8 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 5ccfdbe062..d12bb8fa09 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -669,7 +669,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 36962dc8bb..b2171a3bb7 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 8bd9d04024..da0777098a 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 46859f2135..99a2fe2dfa 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -668,7 +668,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index f900d10865..1f8c470217 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 530896fae7..a34427ece4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index e02f0e11b7..3d877d2441 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index ed359b1909..886b3b7a22 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -683,7 +683,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 64e5da31be..8b579c0f24 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -687,7 +687,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index b4134f9717..9d5c5a2c2b 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index d8d5f8d1e2..48a52b38ed 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 104583eb71..027a26ad99 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -669,7 +669,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index c700d5c9af..165619917f 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 232ca761b4..93ea50a1de 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index a4729539d1..0882547265 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 821c58d7f4..8699fd446b 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 08cf2aa5d2..8d1de43e68 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 635793b464..3a14a502f7 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 0d8b4e464b..a3020a65c8 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index f2067a7099..5d378da411 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 7df5c0cf1c..c19f6c13d8 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 24941f1e93..792800e1de 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 50240ece4c..22ab5e0acd 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -657,7 +657,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 22ad956251..faebab7293 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -675,7 +675,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index fb7f08b133..a85f1ae2df 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -675,7 +675,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 668c4659c7..05cfb5f4bb 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 49b5d1a03a..5bb2b019ea 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index a5695f40ca..23ca13c9d3 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 82d695a76e..470994abe5 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index d66e815d06..36358bac31 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index e8a048edb7..16923276fa 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index d0ed52af94..c8d71a8c0f 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 26368af6c2..940944b2f9 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 5312e8adf4..023bb80732 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 3f899da06f..b039054310 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 99cf534146..7da804376e 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index bdf6422693..2b6abfcf10 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 8e2c0963ef..e4a3300bc2 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 35e9368c31..9336efafb8 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 46baac435d..053c530ac0 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 6d26035699..63c30b4c78 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 17c77ea764..efa826153c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 2dc9bf9399..589fa7e272 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 1ae64e5aa6..9cff9b62ce 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 8f7c53fc2b..caa8139e3b 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -665,7 +665,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 405cfbc807..c8c98f15ad 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 76b95dc445..5c2fb05423 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 105f19bd87..30654e4c61 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index c3efe6ffc0..6acacd2a59 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -660,7 +660,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index d913f15c8e..7d3e161120 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -661,7 +661,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index cab9411260..b7cf0bbea2 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 86d2700c07..4a311c32ec 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -642,7 +642,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index f9f1ca9a38..2ef5091beb 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 2f78392b46..973f198bad 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)