3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-17 01:27:55 +00:00
Code Issues Releases Wiki Activity

📝 Config section reorganization

Browse source
This commit is contained in:
Scott Lahteine 2024-07-23 18:30:42 -05:00
parent 6a095a6427
commit 24b434b6d7
375 changed files with 9733 additions and 7479 deletions
Download patch file Download diff file Expand all files Collapse all files

46
config/examples/Geeetech/A10/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10D/Configuration.h
View file

@ -1730,6 +1730,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1903,6 +1905,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2433,9 +2437,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2458,6 +2462,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2618,9 +2624,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2667,21 +2688,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10M/Stock LCD/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2434,9 +2438,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2459,6 +2463,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2619,9 +2625,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2668,21 +2689,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2434,9 +2438,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2459,6 +2463,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2619,9 +2625,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2668,21 +2689,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10PRO/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10T/Stock LCD/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2435,9 +2439,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2460,6 +2464,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2620,9 +2626,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2669,21 +2690,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2435,9 +2439,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2460,6 +2464,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2620,9 +2626,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2669,21 +2690,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A20/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2433,9 +2437,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2458,6 +2462,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2618,9 +2624,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2667,21 +2688,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A20M/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2434,9 +2438,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2459,6 +2463,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2619,9 +2625,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2668,21 +2689,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/A20T/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2435,9 +2439,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2460,6 +2464,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2620,9 +2626,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2669,21 +2690,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/A30/Configuration.h
View file

@ -1729,6 +1729,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,22 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/A30M/Configuration.h
View file

@ -1729,6 +1729,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,22 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/A30T/Configuration.h
View file

@ -1729,6 +1729,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,22 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/D200/Configuration.h
View file

@ -1729,6 +1729,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,22 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Duplicator5/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/E180/Configuration.h
View file

@ -1730,6 +1730,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1903,6 +1905,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,22 +2688,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/GT2560/Configuration.h
View file

@ -1736,6 +1736,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1909,6 +1911,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2437,9 +2441,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2462,6 +2466,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2622,9 +2628,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
//#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2671,21 +2692,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
//#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

48
config/examples/Geeetech/M201/Configuration.h
View file

@ -1729,6 +1729,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1902,6 +1904,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,25 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,22 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
#define ONBOARD_SDIO
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/MeCreator2/Configuration.h
View file

@ -1730,6 +1730,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1903,6 +1905,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2431,9 +2435,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2456,6 +2460,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2616,9 +2622,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2665,21 +2686,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Me_creator/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Me_ducer/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/PI3A PRO/Configuration.h
View file

@ -1741,6 +1741,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1914,6 +1916,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2443,9 +2447,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2468,6 +2472,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2628,9 +2634,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2677,21 +2698,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -1741,6 +1741,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1914,6 +1916,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2443,9 +2447,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2468,6 +2472,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2628,9 +2634,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2677,21 +2698,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -1741,6 +1741,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1914,6 +1916,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2443,9 +2447,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2468,6 +2472,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2628,9 +2634,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2677,21 +2698,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*

46
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -1731,6 +1731,8 @@
#define PROBING_BED_TEMP 50
#endif
// @section stepper drivers
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' }
#define X_ENABLE_ON 0
@ -1904,6 +1906,8 @@
#endif
/**
* @section filament runout sensors
*
* Filament Runout Sensors
* Mechanical or opto endstops are used to check for the presence of filament.
*
@ -2432,9 +2436,9 @@
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// @section motion
/**
* @section nozzle park
*
* Nozzle Park
*
* Park the nozzle at the given XYZ position on idle or G27.
@ -2457,6 +2461,8 @@
#endif
/**
* @section nozzle clean
*
* Clean Nozzle Feature
*
* Adds the G12 command to perform a nozzle cleaning process.
@ -2617,9 +2623,24 @@
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
// @section media
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
#if ENABLED(SDSUPPORT)
//#define SD_CHECK_AND_RETRY
#endif
// @section interface
@ -2666,21 +2687,6 @@
*/
#define LCD_INFO_SCREEN_STYLE 0
/**
* SD CARD
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
/**
* LCD Menu Items
*