diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h
index ea40e353ed..09a137f26b 100644
--- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h
+++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h
@@ -1025,7 +1025,7 @@
   // Delta calibration menu
   // Add three-point calibration to the MarlinUI menu.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  //#define DELTA_CALIBRATION_MENU
+  #define DELTA_CALIBRATION_MENU
 
   // G33 Delta Auto-Calibration. Enable EEPROM_SETTINGS to store results.
   #define DELTA_AUTO_CALIBRATION
@@ -1363,9 +1363,9 @@
  */
 #define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK  5.0
-  #define DEFAULT_YJERK  DEFAULT_XJERK
-  #define DEFAULT_ZJERK  DEFAULT_XJERK // Must be same as XY for delta
+  #define DEFAULT_XJERK DEFAULT_ZJERK
+  #define DEFAULT_YJERK DEFAULT_ZJERK
+  #define DEFAULT_ZJERK  5.0
   #define DEFAULT_EJERK  5.0
   //#define DEFAULT_IJERK  0.3
   //#define DEFAULT_JJERK  0.3
@@ -2315,7 +2315,7 @@
 //#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
-  #define MESH_EDIT_Z_STEP  0.05  // (mm) Step size while manually probing Z axis.
+  #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
   //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif
@@ -2536,7 +2536,7 @@
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { 0, 0, 20 }
+  #define NOZZLE_PARK_POINT { 0, Y_MIN_POS, 10 }
   #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h
index 9eb29d7f85..2e8814f51f 100644
--- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h
+++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h
@@ -162,9 +162,9 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC2240', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  A4988
+#define X_DRIVER_TYPE  DRV8825
+#define Y_DRIVER_TYPE  DRV8825
+#define Z_DRIVER_TYPE  DRV8825
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
@@ -176,7 +176,7 @@
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE DRV8825
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -1932,8 +1932,8 @@
 // @section geometry
 
 // The size of the printable area
-#define X_BED_SIZE PRINTABLE_RADIUS * 2
-#define Y_BED_SIZE PRINTABLE_RADIUS * 2
+#define X_BED_SIZE ((PRINTABLE_RADIUS) * 2)
+#define Y_BED_SIZE ((PRINTABLE_RADIUS) * 2)
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS -(PRINTABLE_RADIUS)
@@ -2195,7 +2195,7 @@
  * Turn on with the command 'M111 S32'.
  * NOTE: Requires a lot of flash!
  */
-#define DEBUG_LEVELING_FEATURE
+//#define DEBUG_LEVELING_FEATURE
 
 #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY)
   // Set a height for the start of manual adjustment