diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index cbf34305b6..9b7dc6dff4 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 7de58ebd16..b5f254037b 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index ac6632f672..9c1e15e3d1 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index bdbc489ff0..f7c8344c4c 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 3a7f72a363..c9e8e0fd58 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index 49a7f0d249..c697f518e1 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -3398,6 +3398,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index 5a0641a147..47812ab546 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -3388,6 +3388,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 0cad46a9d8..889ed3ecfd 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 720214bd7c..32996055af 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 720214bd7c..32996055af 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 9057eecc81..31a09f47a0 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 0403fc03c5..b188ca2261 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 7aa4e00672..db9fa834e1 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
index 3fb8d78fb2..8fc8c643f8 100644
--- a/config/examples/Anet/A9/Configuration_adv.h
+++ b/config/examples/Anet/A9/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
index 802f206674..76a6d384c1 100644
--- a/config/examples/Anet/E10/Configuration_adv.h
+++ b/config/examples/Anet/E10/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
index 15074a0ace..8d2297971a 100644
--- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h	
+++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
index 519adf5498..83386df43f 100644
--- a/config/examples/Anet/E16/Stock/Configuration_adv.h
+++ b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
index 952c3a80ef..d2ea084008 100644
--- a/config/examples/Anet/ET4+/Configuration_adv.h
+++ b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
index 952c3a80ef..d2ea084008 100644
--- a/config/examples/Anet/ET4-Pro/Configuration_adv.h
+++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
index 36ac501880..7a5c237ec0 100644
--- a/config/examples/Anet/ET4/Configuration_adv.h
+++ b/config/examples/Anet/ET4/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h
index 36ac501880..7a5c237ec0 100644
--- a/config/examples/Anet/ET4X/Configuration_adv.h
+++ b/config/examples/Anet/ET4X/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h
index dd65915c15..571188e0d3 100644
--- a/config/examples/Anet/ET5-Pro/Configuration_adv.h
+++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h
index dd65915c15..571188e0d3 100644
--- a/config/examples/Anet/ET5/Configuration_adv.h
+++ b/config/examples/Anet/ET5/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h
index dd65915c15..571188e0d3 100644
--- a/config/examples/Anet/ET5X/Configuration_adv.h
+++ b/config/examples/Anet/ET5X/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h
index c2f263ac86..e06787b229 100644
--- a/config/examples/AnyCubic/Chiron/Configuration_adv.h
+++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
index 62264f45a1..582cb141c1 100644
--- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
index de83b92db8..0587f7262e 100644
--- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
index 8079c35859..28527b1e78 100644
--- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h
index 6fb23ab630..646f2052a1 100644
--- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
+++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 42862ed078..ff1a559eee 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 4f0c37de5a..da63e38f86 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -3391,6 +3391,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h
index e0f798d3d3..5d6dff80ee 100644
--- a/config/examples/Artillery/Genius/Configuration_adv.h
+++ b/config/examples/Artillery/Genius/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h
index e0f798d3d3..5d6dff80ee 100644
--- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
index abe1a2a00b..6d7d145550 100644
--- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h
index cbf34305b6..9b7dc6dff4 100644
--- a/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b3f8f5c95d..c1f88d12d1 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 78cb4d23dd..f3df8ec51d 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -3380,6 +3380,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
index 5f0e5a2e63..778bb1b586 100644
--- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
+++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h
index 1c58e92355..501d8a5f13 100644
--- a/config/examples/BIQU/B1/Configuration_adv.h
+++ b/config/examples/BIQU/B1/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index d7e2c23bef..2a7b583fdb 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index f3976d7937..4669214d35 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -3395,6 +3395,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index d7e2c23bef..2a7b583fdb 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 23e1249909..fa22918aa7 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 455913e02f..c5b1d107bd 100644
--- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
index 7250ba8233..c55845a7e3 100644
--- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
index d57db4c106..bf6cabdc71 100644
--- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
index 411fe80704..cd0af3f790 100644
--- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
index 411fe80704..cd0af3f790 100644
--- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h
index 30f8bb05e9..73687e7e7a 100644
--- a/config/examples/Creality/CR-10 V2/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h	
@@ -3393,6 +3393,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h
index eea2b10adf..d394263897 100644
--- a/config/examples/Creality/CR-10 V3/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h	
@@ -3394,6 +3394,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 6c78121668..76af7c9a4d 100644
--- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
index f3764a89f5..56dcb726c1 100644
--- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
@@ -3390,6 +3390,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
index 3693b46143..8f9569161f 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 722a082b78..84babb007d 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
index 9c096eddbf..717af57f17 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
index 7941f3c859..14636b5c14 100644
--- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 33c751ecb1..3ed2fcda51 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index b117ed1636..f1654ca10c 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index aaf86ba773..f120c4edfa 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 03f45af037..b2bec9c470 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h
index c0fbb9da04..2bf9c05ea3 100644
--- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h	
@@ -3388,6 +3388,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
index 9b348ded0d..70cbb55545 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index 45ccc68ff0..28c53298a0 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 7a8aa0ee8e..a996294875 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 9a2f06e5eb..98ea8e35ec 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
index 491d65ab63..a38e02fd23 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
index 6677b95a3c..03130f4cff 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h	
@@ -3388,6 +3388,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
index 9c64e286d2..2ec9dba0a6 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h
index 14b90c900c..7294f98b6b 100644
--- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
@@ -3388,6 +3388,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
index 8050140d3d..e44a40c11e 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
index 405058ffb7..d828ee78a5 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
index 2fbfd067b9..8621bf66ba 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
index 405058ffb7..d828ee78a5 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
index 2e67824214..ca49fe5729 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index 0e1071343c..63a482126c 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 8778b769ca..e34dffceab 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index a0fefc17f8..f7820a9aa4 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
index 07ec16903a..3a062d192d 100644
--- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
index 07ec16903a..3a062d192d 100644
--- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
index ac5aff5e7a..fdd8968632 100644
--- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
index 0c9272229f..025d1fb899 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
index 0c9272229f..025d1fb899 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
index 0c9272229f..025d1fb899 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h
index 0c9272229f..025d1fb899 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
index 69bdd41e6b..a149d2cbf4 100644
--- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h
index 875edba9df..af5a262075 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h
index 937af9db93..b34fbca4ab 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h
index aea5a104f4..3187532ac2 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index d540a3edb5..f16e40fc18 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h
index bf87c63b06..6b0925964d 100644
--- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
index af4ec8370f..3951d6806d 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h
index 0b1fbdcb56..1c202e25d9 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index ae3c035df9..8b920a9047 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h
index 99bcee33d7..7583d7bce1 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h
index a4be609324..a86ef9a993 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h
index 1060646abc..726ce43aae 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h
index a4be609324..a86ef9a993 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h
index d4c27e795d..d1dd2f68af 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
@@ -3391,6 +3391,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
index af4ec8370f..3951d6806d 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h
index 0b1fbdcb56..1c202e25d9 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 8778b769ca..e34dffceab 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index b995ede313..4ceb964247 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
index 1e77c2d9ae..f73bf60b04 100644
--- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
index 1e77c2d9ae..f73bf60b04 100644
--- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h
index 3651dcfb36..41bbf56608 100644
--- a/config/examples/Creality/Ender-6/Configuration_adv.h
+++ b/config/examples/Creality/Ender-6/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index afe12a7b38..82abb5616d 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h
index aba71410dc..8f2a535bd6 100644
--- a/config/examples/Daycom/3DP-100/Configuration_adv.h
+++ b/config/examples/Daycom/3DP-100/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index 52d85b22b5..36563f8f13 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index b6a3335ad0..edc3c8f9c8 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h
index 87cd22ca42..d7bd96f5de 100644
--- a/config/examples/Eryone/Thinker SE/Configuration_adv.h	
+++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h	
@@ -3393,6 +3393,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h
index 45bce23fde..c97d3662bc 100644
--- a/config/examples/Eryone/Thinker V2/Configuration_adv.h	
+++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h	
@@ -3393,6 +3393,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index bc2ee1e74e..e5ec0d425d 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 662624c804..eb4905ccb8 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index 97c43713dd..91c58d98a7 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index 54220a613e..c9a5a1d7bb 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index 54220a613e..c9a5a1d7bb 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h
index 719e010b12..5c0a8ac639 100644
--- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
+++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 331c32a314..07449a4a09 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h
index 8beb0adde0..19c1eb771a 100644
--- a/config/examples/FlyingBear/P905H/Configuration_adv.h
+++ b/config/examples/FlyingBear/P905H/Configuration_adv.h
@@ -3390,6 +3390,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index a52896cc3c..f696304234 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 0128cee21f..a68d979e4a 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index cf19bf7fbb..2b858c4a69 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 0c2b2b7d4d..0151819c91 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -3391,6 +3391,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 38d866e142..47ff554e74 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index 5ba9198521..27513a61de 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 54fc628f19..933361114b 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h
index 38d866e142..47ff554e74 100644
--- a/config/examples/Geeetech/A10PRO/Configuration_adv.h
+++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index 54fc628f19..933361114b 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index ca7366cfb7..1085182b7e 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index ca7366cfb7..1085182b7e 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index ca7366cfb7..1085182b7e 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index 179ae52d92..ec09f832b9 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h
index 179ae52d92..ec09f832b9 100644
--- a/config/examples/Geeetech/A30M/Configuration_adv.h
+++ b/config/examples/Geeetech/A30M/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h
index 179ae52d92..ec09f832b9 100644
--- a/config/examples/Geeetech/A30T/Configuration_adv.h
+++ b/config/examples/Geeetech/A30T/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index 23284daa63..100aaa88af 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
index 97c43713dd..91c58d98a7 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index 179ae52d92..ec09f832b9 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index 23284daa63..100aaa88af 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 3ca3963559..8ee85573a3 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h
index 97c43713dd..91c58d98a7 100644
--- a/config/examples/Geeetech/Me_creator/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
index edde5004b1..e66ce4cf62 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index f4fe9af581..09166d9f1c 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 38d866e142..47ff554e74 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 38d866e142..47ff554e74 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index 19a27cdf67..2320ea3ee9 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 1196e800b1..1eab5f656c 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h
index e2a1eb725b..fb6be1bf71 100644
--- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h	
+++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h	
@@ -3386,6 +3386,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index 1b531596ca..428623b090 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -3392,6 +3392,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 706e8252da..185b3ee428 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index 1b531596ca..428623b090 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -3392,6 +3392,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 43763cf614..ab7519750d 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h
index b03af5eefc..dfdb296e3f 100644
--- a/config/examples/Kingroon/KP3/Configuration_adv.h
+++ b/config/examples/Kingroon/KP3/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h
index 952c3a80ef..d2ea084008 100644
--- a/config/examples/Labists/ET4/Configuration_adv.h
+++ b/config/examples/Labists/ET4/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h
index a3e126b4b5..57b8cd08bd 100644
--- a/config/examples/MBot/Cube/Configuration_adv.h
+++ b/config/examples/MBot/Cube/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h
index 03f498b25f..cc136aa2d6 100644
--- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
+++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
@@ -3381,6 +3381,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 981a37ab23..12c59f0922 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 51195834c3..d1b9ab721b 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index af2a5d9a15..598cc25ea7 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index f956c9ff58..e8d4c09fa6 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index cbf34305b6..9b7dc6dff4 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 7b91c4ba27..843d5f12d5 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index 3d48c1d43a..f483bf8f8b 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h
index 107eaf59a4..c93d45cf92 100644
--- a/config/examples/Nextion/Configuration_adv.h
+++ b/config/examples/Nextion/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h
index 0dad33a258..6e3c2542da 100644
--- a/config/examples/Ortur 4/Configuration_adv.h	
+++ b/config/examples/Ortur 4/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h
index bbb1f51600..ec549e8b26 100644
--- a/config/examples/Prusa/MK3/Configuration_adv.h
+++ b/config/examples/Prusa/MK3/Configuration_adv.h
@@ -3368,6 +3368,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
index ac2dc7068c..9366b7bc6a 100644
--- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
+++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h
index e984aba3d0..5cbd198e06 100644
--- a/config/examples/Qidi/Qidi 1/Configuration_adv.h	
+++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h
index 9057eecc81..31a09f47a0 100644
--- a/config/examples/Raiscube/A8r/Configuration_adv.h
+++ b/config/examples/Raiscube/A8r/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 7ac2e9af68..161ff58339 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index bc90d42587..e8ce3350e4 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index bc90d42587..e8ce3350e4 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index bc90d42587..e8ce3350e4 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h
index a4da6d63c0..4e188b5837 100755
--- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
+++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h
index 549b55a937..fffe0bac9a 100644
--- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
+++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
@@ -3390,6 +3390,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index c984b40e63..789ff6e3d8 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
index 1302b18f66..298c57182c 100644
--- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
@@ -3390,6 +3390,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index a4b0018258..41905e60d3 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index a4b0018258..41905e60d3 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
index db2ff66ceb..a991e91c4e 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index 6462b08a65..8ec478b933 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
index b540d3d43b..aca12b8460 100644
--- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
@@ -3390,6 +3390,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 22cbae59b2..07bde29431 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 22cbae59b2..07bde29431 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index cf920fc0ff..cb8bbf18e8 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index b6b34daa2e..6e9a987644 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index abcafcae26..aec59ca633 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index abcafcae26..aec59ca633 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index abcafcae26..aec59ca633 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index eebf2120cc..bb52e11ad3 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
index 3c71d1a0c2..f35e829c5e 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index ac7d4bcee6..7fa725387c 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h
index c5b9978ed2..598a431b47 100644
--- a/config/examples/delta/Malyan M300/Configuration_adv.h	
+++ b/config/examples/delta/Malyan M300/Configuration_adv.h	
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index efb0f34c39..a7d59c2811 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index cf920fc0ff..cb8bbf18e8 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index 5f17c773f4..f873486514 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 9534944717..e8dbb8cabe 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -3389,6 +3389,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index b960d72c03..61b711c319 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 59296674af..c315bbd07a 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -3387,6 +3387,15 @@
   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif
 
+/**
+ * Stepper Driver Anti-SNAFU Protection
+ *
+ * If the SAFE_POWER_PIN is defined for your board, Marlin will check
+ * that stepper drivers are properly plugged in before applying power.
+ * Disable protection if your stepper drivers don't support the feature.
+ */
+//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
+
 /**
  * CNC Coordinate Systems
  *