From acb6a831bef2d9004dff9098cb769cd4062d0a21 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 20 May 2021 05:49:28 -0500 Subject: [PATCH] Add BAUDRATE_2/3, move BAUDRATE_GCODE MarlinFirmware/Marlin#21949 --- config/default/Configuration.h | 35 ++++++++++------- config/default/Configuration_adv.h | 3 -- .../examples/3DFabXYZ/Migbot/Configuration.h | 35 ++++++++++------- .../3DFabXYZ/Migbot/Configuration_adv.h | 3 -- .../ADIMLab/Gantry v1/Configuration.h | 35 ++++++++++------- .../ADIMLab/Gantry v1/Configuration_adv.h | 3 -- .../ADIMLab/Gantry v2/Configuration.h | 35 ++++++++++------- .../ADIMLab/Gantry v2/Configuration_adv.h | 3 -- .../AlephObjects/TAZ4/Configuration.h | 35 ++++++++++------- .../AlephObjects/TAZ4/Configuration_adv.h | 3 -- .../Alfawise/U20-bltouch/Configuration.h | 35 ++++++++++------- .../Alfawise/U20-bltouch/Configuration_adv.h | 3 -- config/examples/Alfawise/U20/Configuration.h | 35 ++++++++++------- .../examples/Alfawise/U20/Configuration_adv.h | 3 -- .../AliExpress/CL-260/Configuration.h | 35 ++++++++++------- .../AliExpress/UM2pExt/Configuration.h | 35 ++++++++++------- .../AliExpress/UM2pExt/Configuration_adv.h | 3 -- config/examples/Anet/A2/Configuration.h | 35 ++++++++++------- config/examples/Anet/A2/Configuration_adv.h | 3 -- config/examples/Anet/A2plus/Configuration.h | 35 ++++++++++------- .../examples/Anet/A2plus/Configuration_adv.h | 3 -- config/examples/Anet/A6/Configuration.h | 35 ++++++++++------- config/examples/Anet/A6/Configuration_adv.h | 3 -- config/examples/Anet/A8/Configuration.h | 35 ++++++++++------- config/examples/Anet/A8/Configuration_adv.h | 3 -- config/examples/Anet/A8plus/Configuration.h | 35 ++++++++++------- .../examples/Anet/A8plus/Configuration_adv.h | 3 -- config/examples/Anet/A9/Configuration.h | 35 ++++++++++------- config/examples/Anet/A9/Configuration_adv.h | 3 -- config/examples/Anet/E10/Configuration.h | 35 ++++++++++------- config/examples/Anet/E10/Configuration_adv.h | 3 -- .../Anet/E16/BTT SKR 1.3/Configuration.h | 35 ++++++++++------- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 3 -- .../examples/Anet/E16/Stock/Configuration.h | 35 ++++++++++------- .../Anet/E16/Stock/Configuration_adv.h | 3 -- config/examples/Anet/ET4+/Configuration.h | 35 ++++++++++------- config/examples/Anet/ET4+/Configuration_adv.h | 3 -- config/examples/Anet/ET4-Pro/Configuration.h | 35 ++++++++++------- .../examples/Anet/ET4-Pro/Configuration_adv.h | 3 -- config/examples/Anet/ET4/Configuration.h | 35 ++++++++++------- config/examples/Anet/ET4/Configuration_adv.h | 3 -- config/examples/Anet/ET4X/Configuration.h | 35 ++++++++++------- config/examples/Anet/ET4X/Configuration_adv.h | 3 -- config/examples/Anet/ET5-Pro/Configuration.h | 35 ++++++++++------- .../examples/Anet/ET5-Pro/Configuration_adv.h | 3 -- config/examples/Anet/ET5/Configuration.h | 35 ++++++++++------- config/examples/Anet/ET5/Configuration_adv.h | 3 -- config/examples/Anet/ET5X/Configuration.h | 35 ++++++++++------- config/examples/Anet/ET5X/Configuration_adv.h | 3 -- .../examples/AnyCubic/Chiron/Configuration.h | 35 ++++++++++------- .../AnyCubic/Chiron/Configuration_adv.h | 3 -- .../Mega Zero 2.0/Anycubic V1/Configuration.h | 35 ++++++++++------- .../Anycubic V1/Configuration_adv.h | 3 -- .../Mega Zero/Anycubic V1/Configuration.h | 35 ++++++++++------- .../Mega Zero/Anycubic V1/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../examples/AnyCubic/i3 Mega/Configuration.h | 35 ++++++++++------- .../AnyCubic/i3 Mega/Configuration_adv.h | 3 -- config/examples/AnyCubic/i3/Configuration.h | 35 ++++++++++------- .../examples/AnyCubic/i3/Configuration_adv.h | 3 -- config/examples/ArmEd/Configuration.h | 35 ++++++++++------- config/examples/ArmEd/Configuration_adv.h | 3 -- .../examples/Artillery/Genius/Configuration.h | 35 ++++++++++------- .../Artillery/Genius/Configuration_adv.h | 3 -- .../Artillery/Sidewinder X1/Configuration.h | 35 ++++++++++------- .../Sidewinder X1/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- config/examples/Azteeg/X5GT/Configuration.h | 35 ++++++++++------- .../examples/Azteeg/X5GT/Configuration_adv.h | 3 -- .../BIBO/TouchX/cyclops/Configuration.h | 35 ++++++++++------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 3 -- .../BIBO/TouchX/default/Configuration.h | 35 ++++++++++------- .../BIBO/TouchX/default/Configuration_adv.h | 3 -- .../examples/BIQU/B1-BLTouch/Configuration.h | 35 ++++++++++------- .../BIQU/B1-BLTouch/Configuration_adv.h | 3 -- config/examples/BIQU/B1/Configuration.h | 35 ++++++++++------- config/examples/BIQU/B1/Configuration_adv.h | 3 -- config/examples/BQ/Hephestos/Configuration.h | 35 ++++++++++------- .../examples/BQ/Hephestos/Configuration_adv.h | 3 -- .../examples/BQ/Hephestos_2/Configuration.h | 35 ++++++++++------- .../BQ/Hephestos_2/Configuration_adv.h | 3 -- config/examples/BQ/WITBOX/Configuration.h | 35 ++++++++++------- config/examples/BQ/WITBOX/Configuration_adv.h | 3 -- .../i3 2560 Rev A/no probe/Configuration.h | 35 ++++++++++------- config/examples/Cartesio/Configuration.h | 35 ++++++++++------- config/examples/Cartesio/Configuration_adv.h | 3 -- .../examples/Copymaster3D/300/Configuration.h | 35 ++++++++++------- .../examples/Copymaster3D/400/Configuration.h | 35 ++++++++++------- .../examples/Copymaster3D/500/Configuration.h | 35 ++++++++++------- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../CR-10 Mini/CrealityV1/Configuration.h | 35 ++++++++++------- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 3 -- .../CR-10 Mini/MEEB-3DP/Configuration.h | 35 ++++++++++------- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 3 -- .../CR-10 S4/CrealityV1/Configuration.h | 35 ++++++++++------- .../CR-10 S4/CrealityV1/Configuration_adv.h | 3 -- .../CR-10 S5/CrealityV1/Configuration.h | 35 ++++++++++------- .../CR-10 S5/CrealityV1/Configuration_adv.h | 3 -- .../Creality/CR-10 V2/Configuration.h | 35 ++++++++++------- .../Creality/CR-10 V2/Configuration_adv.h | 3 -- .../Creality/CR-10 V3/Configuration.h | 35 ++++++++++------- .../Creality/CR-10 V3/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Creality/CR-10/CrealityV1/Configuration.h | 35 ++++++++++------- .../CR-10/CrealityV1/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../BigTreeTech SKR Pro v1.2/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../CR-10S/CrealityV1/Configuration.h | 35 ++++++++++------- .../CR-10S/CrealityV1/Configuration_adv.h | 3 -- .../Creality/CR-20 Pro/Configuration.h | 35 ++++++++++------- .../Creality/CR-20 Pro/Configuration_adv.h | 3 -- .../examples/Creality/CR-20/Configuration.h | 35 ++++++++++------- .../Creality/CR-20/Configuration_adv.h | 3 -- .../examples/Creality/CR-6 SE/Configuration.h | 35 ++++++++++------- .../Creality/CR-6 SE/Configuration_adv.h | 3 -- config/examples/Creality/CR-8/Configuration.h | 35 ++++++++++------- .../Creality/CR-8/Configuration_adv.h | 3 -- .../examples/Creality/Ender-2/Configuration.h | 35 ++++++++++------- .../Creality/Ender-2/Configuration_adv.h | 3 -- .../Creality/Ender-3 Max/Configuration.h | 35 ++++++++++------- .../Creality/Ender-3 Max/Configuration_adv.h | 3 -- .../BigTreeTech SKR 1.4 Turbo/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Ender-3 Pro/CrealityV1/Configuration.h | 35 ++++++++++------- .../CrealityV1/Configuration_adv.h | 3 -- .../Ender-3 Pro/CrealityV422/Configuration.h | 35 ++++++++++------- .../CrealityV422/Configuration_adv.h | 3 -- .../Ender-3 Pro/CrealityV427/Configuration.h | 35 ++++++++++------- .../CrealityV427/Configuration_adv.h | 3 -- .../Creality/Ender-3 V2/Configuration.h | 35 ++++++++++------- .../Creality/Ender-3 V2/Configuration_adv.h | 3 -- .../BigTreeTech E3 RRF/Configuration.h | 35 ++++++++++------- .../BigTreeTech E3 RRF/Configuration_adv.h | 3 -- .../2-into-1 Hotend/Configuration.h | 35 ++++++++++------- .../2-into-1 Hotend/Configuration_adv.h | 3 -- .../Dual Z/Configuration.h | 35 ++++++++++------- .../Dual Z/Configuration_adv.h | 3 -- .../Single Extruder/Configuration.h | 35 ++++++++++------- .../Single Extruder/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Ender-3/CrealityV1/Configuration.h | 35 ++++++++++------- .../Ender-3/CrealityV1/Configuration_adv.h | 3 -- .../Ender-3/CrealityV422/Configuration.h | 35 ++++++++++------- .../Ender-3/CrealityV422/Configuration_adv.h | 3 -- .../Ender-3/CrealityV427/Configuration.h | 35 ++++++++++------- .../Ender-3/CrealityV427/Configuration_adv.h | 3 -- .../BLTouch/Configuration.h | 35 ++++++++++------- .../BLTouch/Configuration_adv.h | 3 -- .../FYSETC Cheetah 1.2/base/Configuration.h | 35 ++++++++++------- .../base/Configuration_adv.h | 3 -- .../FYSETC Cheetah/BLTouch/Configuration.h | 35 ++++++++++------- .../BLTouch/Configuration_adv.h | 3 -- .../FYSETC Cheetah/base/Configuration.h | 35 ++++++++++------- .../FYSETC Cheetah/base/Configuration_adv.h | 3 -- .../Creality/Ender-3/MEEB-3DP/Configuration.h | 35 ++++++++++------- .../Ender-3/MEEB-3DP/Configuration_adv.h | 3 -- .../Ender-3/MKS Robin E3/V1.0/Configuration.h | 35 ++++++++++------- .../MKS Robin E3/V1.0/Configuration_adv.h | 3 -- .../Ender-3/MKS Robin E3/V1.1/Configuration.h | 35 ++++++++++------- .../MKS Robin E3/V1.1/Configuration_adv.h | 3 -- .../Ender-3/MKS Robin E3P/Configuration.h | 35 ++++++++++------- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 3 -- .../examples/Creality/Ender-4/Configuration.h | 35 ++++++++++------- .../Creality/Ender-4/Configuration_adv.h | 3 -- .../Creality/Ender-5 Plus/Configuration.h | 35 ++++++++++------- .../Creality/Ender-5 Plus/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../BigTreeTech SKR E3 Turbo/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Ender-5 Pro/CrealityV1/Configuration.h | 35 ++++++++++------- .../CrealityV1/Configuration_adv.h | 3 -- .../Ender-5 Pro/CrealityV422/Configuration.h | 35 ++++++++++------- .../CrealityV422/Configuration_adv.h | 3 -- .../Ender-5 Pro/CrealityV427/Configuration.h | 35 ++++++++++------- .../CrealityV427/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../BigTreeTech SKR E3 Turbo/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Ender-5/CrealityV1/Configuration.h | 35 ++++++++++------- .../Ender-5/CrealityV1/Configuration_adv.h | 3 -- .../Ender-5/CrealityV427/Configuration.h | 35 ++++++++++------- .../Ender-5/CrealityV427/Configuration_adv.h | 3 -- .../examples/Creality/Ender-6/Configuration.h | 35 ++++++++++------- .../Creality/Ender-6/Configuration_adv.h | 3 -- .../Dagoma/Disco Ultimate/Configuration.h | 35 ++++++++++------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 3 -- .../examples/Daycom/3DP-100/Configuration.h | 35 ++++++++++------- .../Daycom/3DP-100/Configuration_adv.h | 3 -- .../Imprimante multifonction/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- config/examples/Einstart-S/Configuration.h | 35 ++++++++++------- .../examples/Einstart-S/Configuration_adv.h | 3 -- .../Eryone/Thinker SE/Configuration.h | 35 ++++++++++------- .../Eryone/Thinker SE/Configuration_adv.h | 3 -- .../Eryone/Thinker V2/Configuration.h | 35 ++++++++++------- .../Eryone/Thinker V2/Configuration_adv.h | 3 -- config/examples/FYSETC/AIO_II/Configuration.h | 35 ++++++++++------- .../FYSETC/AIO_II/Configuration_adv.h | 3 -- config/examples/FYSETC/F6_13/Configuration.h | 35 ++++++++++------- .../examples/FYSETC/F6_13/Configuration_adv.h | 3 -- config/examples/FYSETC/S6/Configuration.h | 35 ++++++++++------- config/examples/FYSETC/S6/Configuration_adv.h | 3 -- config/examples/Felix/DUAL/Configuration.h | 35 ++++++++++------- .../examples/Felix/DUAL/Configuration_adv.h | 3 -- config/examples/Felix/Single/Configuration.h | 35 ++++++++++------- .../examples/Felix/Single/Configuration_adv.h | 3 -- .../FlashForge/Creator 2X/Configuration.h | 35 ++++++++++------- .../FlashForge/Creator 2X/Configuration_adv.h | 3 -- .../FlashForge/CreatorPro/Configuration.h | 35 ++++++++++------- .../FlashForge/CreatorPro/Configuration_adv.h | 3 -- .../examples/FlyingBear/P905H/Configuration.h | 35 ++++++++++------- .../FlyingBear/P905H/Configuration_adv.h | 3 -- .../FolgerTech/i3-2020/Configuration.h | 35 ++++++++++------- .../FolgerTech/i3-2020/Configuration_adv.h | 3 -- .../examples/Formbot/Raptor/Configuration.h | 35 ++++++++++------- .../Formbot/Raptor/Configuration_adv.h | 3 -- .../examples/Formbot/T_Rex_2+/Configuration.h | 35 ++++++++++------- .../Formbot/T_Rex_2+/Configuration_adv.h | 3 -- .../examples/Formbot/T_Rex_3/Configuration.h | 35 ++++++++++------- .../Formbot/T_Rex_3/Configuration_adv.h | 3 -- config/examples/Geeetech/A10/Configuration.h | 35 ++++++++++------- .../examples/Geeetech/A10/Configuration_adv.h | 3 -- config/examples/Geeetech/A10D/Configuration.h | 35 ++++++++++------- .../Geeetech/A10D/Configuration_adv.h | 3 -- .../Geeetech/A10M/Configuration_adv.h | 3 -- .../Geeetech/A10M/Stock LCD/Configuration.h | 35 ++++++++++------- .../A10M/YHCB2004_V4.1/Configuration.h | 35 ++++++++++------- .../examples/Geeetech/A10PRO/Configuration.h | 35 ++++++++++------- .../Geeetech/A10PRO/Configuration_adv.h | 3 -- .../Geeetech/A10T/Configuration_adv.h | 3 -- .../Geeetech/A10T/Stock LCD/Configuration.h | 35 ++++++++++------- .../A10T/YHCB2004_V4.1/Configuration.h | 35 ++++++++++------- config/examples/Geeetech/A20/Configuration.h | 35 ++++++++++------- .../examples/Geeetech/A20/Configuration_adv.h | 3 -- config/examples/Geeetech/A20M/Configuration.h | 35 ++++++++++------- .../Geeetech/A20M/Configuration_adv.h | 3 -- config/examples/Geeetech/A20T/Configuration.h | 35 ++++++++++------- .../Geeetech/A20T/Configuration_adv.h | 3 -- config/examples/Geeetech/A30/Configuration.h | 35 ++++++++++------- .../examples/Geeetech/A30/Configuration_adv.h | 3 -- config/examples/Geeetech/A30M/Configuration.h | 35 ++++++++++------- .../Geeetech/A30M/Configuration_adv.h | 3 -- config/examples/Geeetech/A30T/Configuration.h | 35 ++++++++++------- .../Geeetech/A30T/Configuration_adv.h | 3 -- config/examples/Geeetech/D200/Configuration.h | 35 ++++++++++------- .../Geeetech/D200/Configuration_adv.h | 3 -- .../Geeetech/Duplicator5/Configuration.h | 35 ++++++++++------- .../Geeetech/Duplicator5/Configuration_adv.h | 3 -- config/examples/Geeetech/E180/Configuration.h | 35 ++++++++++------- .../Geeetech/E180/Configuration_adv.h | 3 -- .../examples/Geeetech/GT2560/Configuration.h | 35 ++++++++++------- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 35 ++++++++++------- config/examples/Geeetech/M201/Configuration.h | 35 ++++++++++------- .../Geeetech/M201/Configuration_adv.h | 3 -- .../Geeetech/MeCreator2/Configuration.h | 35 ++++++++++------- .../Geeetech/MeCreator2/Configuration_adv.h | 3 -- .../Geeetech/Me_creator/Configuration.h | 35 ++++++++++------- .../Geeetech/Me_creator/Configuration_adv.h | 3 -- .../Geeetech/Me_ducer/Configuration.h | 35 ++++++++++------- .../Geeetech/Me_ducer/Configuration_adv.h | 3 -- .../Geeetech/PI3A PRO/Configuration.h | 35 ++++++++++------- .../Geeetech/PI3A PRO/Configuration_adv.h | 3 -- .../Prusa i3 Pro B/bltouch/Configuration.h | 35 ++++++++++------- .../Prusa i3 Pro B/noprobe/Configuration.h | 35 ++++++++++------- .../Geeetech/Prusa i3 Pro C/Configuration.h | 35 ++++++++++------- .../Prusa i3 Pro C/Configuration_adv.h | 3 -- .../Geeetech/Prusa i3 Pro W/Configuration.h | 35 ++++++++++------- .../Prusa i3 Pro W/Configuration_adv.h | 3 -- config/examples/HMS434/Configuration.h | 35 ++++++++++------- config/examples/HMS434/Configuration_adv.h | 3 -- .../examples/Infitary/i3-M508/Configuration.h | 35 ++++++++++------- .../Infitary/i3-M508/Configuration_adv.h | 3 -- .../Intamsys/FunmatHT 4988/Configuration.h | 35 ++++++++++------- .../FunmatHT 4988/Configuration_adv.h | 3 -- config/examples/JGAurora/A1/Configuration.h | 35 ++++++++++------- .../examples/JGAurora/A1/Configuration_adv.h | 3 -- config/examples/JGAurora/A3/Configuration.h | 35 ++++++++++------- config/examples/JGAurora/A5/Configuration.h | 35 ++++++++++------- .../examples/JGAurora/A5/Configuration_adv.h | 3 -- config/examples/JGAurora/A5S/Configuration.h | 35 ++++++++++------- .../examples/JGAurora/A5S/Configuration_adv.h | 3 -- .../examples/JGAurora/Magic/Configuration.h | 35 ++++++++++------- .../JGAurora/Magic/Configuration_adv.h | 3 -- config/examples/Kingroon/KP3/Configuration.h | 35 ++++++++++------- .../examples/Kingroon/KP3/Configuration_adv.h | 3 -- config/examples/Labists/ET4/Configuration.h | 35 ++++++++++------- .../examples/Labists/ET4/Configuration_adv.h | 3 -- config/examples/MBot/Cube/Configuration.h | 35 ++++++++++------- config/examples/MBot/Cube/Configuration_adv.h | 3 -- .../MakerFarm/Pegasus 12/Configuration.h | 35 ++++++++++------- .../MakerFarm/Pegasus 12/Configuration_adv.h | 3 -- config/examples/MakerParts/Configuration.h | 35 ++++++++++------- .../examples/MakerParts/Configuration_adv.h | 3 -- config/examples/Malyan/M150/Configuration.h | 35 ++++++++++------- .../examples/Malyan/M150/Configuration_adv.h | 3 -- config/examples/Malyan/M200/Configuration.h | 35 ++++++++++------- .../examples/Malyan/M200/Configuration_adv.h | 3 -- .../Micromake/C1/basic/Configuration.h | 35 ++++++++++------- .../Micromake/C1/enhanced/Configuration.h | 35 ++++++++++------- .../Micromake/C1/enhanced/Configuration_adv.h | 3 -- config/examples/Mks/Robin/Configuration.h | 35 ++++++++++------- config/examples/Mks/Robin/Configuration_adv.h | 3 -- .../examples/Mks/Robin_Lite3/Configuration.h | 27 +++++++------ config/examples/Mks/Robin_Pro/Configuration.h | 37 ++++++++++-------- config/examples/Mks/Sbase/Configuration.h | 35 ++++++++++------- config/examples/Mks/Sbase/Configuration_adv.h | 3 -- config/examples/Modix/Big60/Configuration.h | 35 ++++++++++------- .../examples/Modix/Big60/Configuration_adv.h | 3 -- config/examples/Nextion/Configuration.h | 35 ++++++++++------- config/examples/Nextion/Configuration_adv.h | 3 -- config/examples/Ortur 4/Configuration.h | 35 ++++++++++------- config/examples/Ortur 4/Configuration_adv.h | 3 -- .../Printrbot/PrintrboardG2/Configuration.h | 37 ++++++++++-------- .../Simple Metal RevD/Configuration.h | 35 ++++++++++------- config/examples/Prusa/MK3/Configuration.h | 35 ++++++++++------- config/examples/Prusa/MK3/Configuration_adv.h | 3 -- .../MK3S-BigTreeTech-BTT002/Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- config/examples/Qidi/Qidi 1/Configuration.h | 35 ++++++++++------- .../examples/Qidi/Qidi 1/Configuration_adv.h | 3 -- config/examples/Raiscube/A8r/Configuration.h | 35 ++++++++++------- .../examples/Raiscube/A8r/Configuration_adv.h | 3 -- .../examples/RapideLite/RL200/Configuration.h | 35 ++++++++++------- .../RapideLite/RL200/Configuration_adv.h | 3 -- .../examples/Renkforce/RF100/Configuration.h | 35 ++++++++++------- .../Renkforce/RF100/Configuration_adv.h | 3 -- .../Renkforce/RF100XL/Configuration.h | 35 ++++++++++------- .../Renkforce/RF100XL/Configuration_adv.h | 3 -- .../Renkforce/RF100v2/Configuration.h | 35 ++++++++++------- .../Renkforce/RF100v2/Configuration_adv.h | 3 -- .../examples/RepRapPro/Huxley/Configuration.h | 35 ++++++++++------- .../RepRapWorld/Megatronics/Configuration.h | 35 ++++++++++------- config/examples/RigidBot/Configuration.h | 35 ++++++++++------- config/examples/RigidBot/Configuration_adv.h | 3 -- config/examples/Robo3D/R1+/Configuration.h | 35 ++++++++++------- .../examples/SCARA/MP_SCARA/Configuration.h | 35 ++++++++++------- .../SCARA/MP_SCARA/Configuration_adv.h | 3 -- config/examples/SCARA/Morgan/Configuration.h | 35 ++++++++++------- .../examples/SCARA/Morgan/Configuration_adv.h | 3 -- .../STM32/Black_STM32F407VET6/Configuration.h | 35 ++++++++++------- .../Black_STM32F407VET6/Configuration_adv.h | 3 -- .../STM32/STM32F103RE/Configuration.h | 35 ++++++++++------- config/examples/STM32/STM32F4/Configuration.h | 35 ++++++++++------- config/examples/Sanguinololu/Configuration.h | 35 ++++++++++------- .../examples/Sanguinololu/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Sovol/SV-01/CrealityV22/Configuration.h | 35 ++++++++++------- .../SV-01/CrealityV22/Configuration_adv.h | 3 -- .../Sovol/SV-01/CrealityV221/Configuration.h | 35 ++++++++++------- .../SV-01/CrealityV221/Configuration_adv.h | 3 -- .../examples/TPARA/AXEL_TPARA/Configuration.h | 35 ++++++++++------- .../TPARA/AXEL_TPARA/Configuration_adv.h | 3 -- .../Tevo/Michelangelo/Configuration.h | 35 ++++++++++------- .../Tevo/Michelangelo/Configuration_adv.h | 3 -- config/examples/Tevo/Nereus/Configuration.h | 35 ++++++++++------- .../examples/Tevo/Nereus/Configuration_adv.h | 3 -- .../Tevo/Tarantula Pro/Configuration.h | 35 ++++++++++------- .../Tevo/Tarantula Pro/Configuration_adv.h | 3 -- .../Tornado/V1 (MKS Base)/Configuration.h | 35 ++++++++++------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 3 -- .../Tornado/V2 (MKS GEN-L)/Configuration.h | 35 ++++++++++------- .../V2 (MKS GEN-L)/Configuration_adv.h | 3 -- config/examples/TheBorg/Configuration.h | 35 ++++++++++------- config/examples/TheBorg/Configuration_adv.h | 3 -- config/examples/TinyBoy2/Configuration.h | 35 ++++++++++------- config/examples/TinyBoy2/Configuration_adv.h | 3 -- config/examples/Tronxy/X1/Configuration.h | 35 ++++++++++------- config/examples/Tronxy/X3A/Configuration.h | 35 ++++++++++------- .../examples/Tronxy/X3A/Configuration_adv.h | 3 -- config/examples/Tronxy/X5S-2E/Configuration.h | 35 ++++++++++------- .../Tronxy/X5S-2E/Configuration_adv.h | 3 -- config/examples/Tronxy/X5S/Configuration.h | 35 ++++++++++------- config/examples/Tronxy/X5SA/Configuration.h | 35 ++++++++++------- .../examples/Tronxy/X5SA/Configuration_adv.h | 3 -- config/examples/Tronxy/XY100/Configuration.h | 35 ++++++++++------- .../Two Trees/BlueR Plus/Configuration.h | 35 ++++++++++------- .../Two Trees/BlueR Plus/Configuration_adv.h | 3 -- .../Two Trees/BlueR/BlueR V1/Configuration.h | 35 ++++++++++------- .../BlueR/BlueR V1/Configuration_adv.h | 3 -- .../Two Trees/BlueR/BlueR V2/Configuration.h | 35 ++++++++++------- .../BlueR/BlueR V2/Configuration_adv.h | 3 -- .../Two Trees/BlueR/BlueR V3/Configuration.h | 35 ++++++++++------- .../BlueR/BlueR V3/Configuration_adv.h | 3 -- .../Sapphire Plus V2/Configuration.h | 39 +++++++++++-------- .../Sapphire Plus V2/Configuration_adv.h | 3 -- .../Two Trees/Sapphire Pro/Configuration.h | 35 ++++++++++------- .../Sapphire Pro/Configuration_adv.h | 3 -- .../UltiMachine/Archim1/Configuration.h | 35 ++++++++++------- .../UltiMachine/Archim1/Configuration_adv.h | 3 -- .../UltiMachine/Archim2/Configuration.h | 35 ++++++++++------- .../UltiMachine/Archim2/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- config/examples/VORONDesign/Configuration.h | 35 ++++++++++------- .../examples/VORONDesign/Configuration_adv.h | 3 -- .../examples/Velleman/K8200/Configuration.h | 35 ++++++++++------- .../Velleman/K8200/Configuration_adv.h | 3 -- .../Velleman/K8400/Dual-head/Configuration.h | 35 ++++++++++------- .../K8400/Dual-head/Configuration_adv.h | 3 -- .../K8400/Single-head/Configuration.h | 35 ++++++++++------- .../K8400/Single-head/Configuration_adv.h | 3 -- .../examples/WASP/PowerWASP/Configuration.h | 27 +++++++------ .../WASP/PowerWASP/Configuration_adv.h | 3 -- .../Wanhao/Duplicator 4S/Configuration.h | 35 ++++++++++------- .../Wanhao/Duplicator 4S/Configuration_adv.h | 3 -- .../Wanhao/Duplicator 6/Configuration.h | 35 ++++++++++------- .../Wanhao/Duplicator 6/Configuration_adv.h | 3 -- .../Wanhao/Duplicator i3 2.1/Configuration.h | 35 ++++++++++------- .../Duplicator i3 2.1/Configuration_adv.h | 3 -- .../Wanhao/Duplicator i3 Mini/Configuration.h | 35 ++++++++++------- .../Duplicator i3 Mini/Configuration_adv.h | 3 -- config/examples/Weistek/wt150/Configuration.h | 35 ++++++++++------- .../Weistek/wt150/Configuration_adv.h | 3 -- .../examples/Zonestar/P802M/Configuration.h | 35 ++++++++++------- .../Zonestar/P802M/Configuration_adv.h | 3 -- .../Configuration.h | 35 ++++++++++------- .../Configuration_adv.h | 3 -- .../Kossel Linear Plus/Configuration.h | 35 ++++++++++------- .../Kossel Linear Plus/Configuration_adv.h | 3 -- .../delta/Anycubic/Kossel/Configuration.h | 35 ++++++++++------- .../delta/Anycubic/Kossel/Configuration_adv.h | 3 -- .../delta/Anycubic/Predator/Configuration.h | 35 ++++++++++------- .../Anycubic/Predator/Configuration_adv.h | 3 -- .../delta/Dreammaker/Overlord/Configuration.h | 35 ++++++++++------- .../Dreammaker/Overlord/Configuration_adv.h | 3 -- .../Dreammaker/Overlord_Pro/Configuration.h | 35 ++++++++++------- .../Overlord_Pro/Configuration_adv.h | 3 -- .../delta/FLSUN/Q5-nano_v1/Configuration.h | 35 ++++++++++------- .../FLSUN/Q5-nano_v1/Configuration_adv.h | 3 -- .../delta/FLSUN/Q5-nano_v2/Configuration.h | 35 ++++++++++------- .../examples/delta/FLSUN/QQ-S/Configuration.h | 35 ++++++++++------- .../delta/FLSUN/QQ-S/Configuration_adv.h | 3 -- .../delta/FLSUN/QQS-Pro/Configuration.h | 35 ++++++++++------- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 3 -- .../FLSUN/auto_calibrate/Configuration.h | 35 ++++++++++------- .../FLSUN/auto_calibrate/Configuration_adv.h | 3 -- .../delta/FLSUN/kossel/Configuration.h | 35 ++++++++++------- .../delta/FLSUN/kossel/Configuration_adv.h | 3 -- .../delta/FLSUN/kossel_mini/Configuration.h | 35 ++++++++++------- .../FLSUN/kossel_mini/Configuration_adv.h | 3 -- .../delta/Geeetech/G2/Configuration.h | 35 ++++++++++------- .../delta/Geeetech/G2/Configuration_adv.h | 3 -- .../delta/Geeetech/G2Pro/Configuration.h | 35 ++++++++++------- .../delta/Geeetech/G2Pro/Configuration_adv.h | 3 -- .../delta/Geeetech/G2S/Configuration.h | 35 ++++++++++------- .../delta/Geeetech/G2S/Configuration_adv.h | 3 -- .../delta/Geeetech/G2SPro/Configuration.h | 35 ++++++++++------- .../delta/Geeetech/G2SPro/Configuration_adv.h | 3 -- .../Geeetech/Rostock 301/Configuration.h | 35 ++++++++++------- .../Geeetech/Rostock 301/Configuration_adv.h | 3 -- .../delta/Hatchbox_Alpha/Configuration.h | 35 ++++++++++------- .../delta/Hatchbox_Alpha/Configuration_adv.h | 3 -- .../examples/delta/MKS/SBASE/Configuration.h | 35 ++++++++++------- .../delta/MKS/SBASE/Configuration_adv.h | 3 -- .../delta/Malyan M300/Configuration.h | 35 ++++++++++------- .../delta/Malyan M300/Configuration_adv.h | 3 -- .../delta/Tevo Little Monster/Configuration.h | 35 ++++++++++------- .../Tevo Little Monster/Configuration_adv.h | 3 -- config/examples/delta/generic/Configuration.h | 35 ++++++++++------- .../delta/generic/Configuration_adv.h | 3 -- .../delta/kossel_clear/Configuration.h | 35 ++++++++++------- .../delta/kossel_clear/Configuration_adv.h | 3 -- .../delta/kossel_mini/Configuration.h | 35 ++++++++++------- .../examples/delta/kossel_pro/Configuration.h | 35 ++++++++++------- .../examples/delta/kossel_xl/Configuration.h | 35 ++++++++++------- .../delta/kossel_xl/Configuration_adv.h | 3 -- .../examples/gCreate/gMax1.5+/Configuration.h | 35 ++++++++++------- .../gCreate/gMax1.5+/Configuration_adv.h | 3 -- config/examples/makibox/Configuration.h | 35 ++++++++++------- config/examples/makibox/Configuration_adv.h | 3 -- config/examples/tvrrug/Round2/Configuration.h | 35 ++++++++++------- .../tvrrug/Round2/Configuration_adv.h | 3 -- 506 files changed, 5336 insertions(+), 4718 deletions(-) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index d5bd8fe89d..f720ff512a 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 49a91b259f..58afecc851 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index f8fe803165..ffc1a9d273 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -106,21 +106,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -129,6 +117,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index e1bbff2f2a..49eed3c62b 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 537d3c7167..703cac5f77 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 1584c0b807..e3fb0630b0 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 43905605a4..bed6f2d069 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index d271d574a0..5cc96b9d57 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index c3f06c9641..623936c2ee 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 91ff618f41..a5e89e8b83 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 65774d0a5b..89a92adb6f 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -130,21 +130,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 2 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -153,6 +141,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 2 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 538e043dfd..954c5766ef 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2127,9 +2127,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 75589b6166..788e0980ea 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -130,21 +130,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 2 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -153,6 +141,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 2 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 451d7835f9..1256e5f8f5 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 492efb5172..b11a5dd687 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index bf50b9964d..80b72eddcf 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index c923563db8..115241226b 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 11062fee08..e63d1e937e 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 482dcbe8a2..eef016507b 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 58254ec77e..35acf5bed9 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 482dcbe8a2..eef016507b 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 729bd0a2e8..427f519fe3 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 4606f8048d..6766b68bb5 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 64158fe1d7..85f56d579a 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 134e0572e2..b6fde67283 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index d5ae9bd31f..348a3bfa1f 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 51b9bb50b6..ea08538dbe 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 1ca8603e78..848f0867b8 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index dc5ba38017..2b38b17a88 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index e38c778d4d..042a42fcab 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 9245f0c7cf..97994c8e08 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index cc35b3849b..984969bafc 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index e98b12958a..976ecaad44 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 32b5aab67e..24e57999c6 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 4ac3ec375b..c5efaee8c1 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index ce36201741..c0819da5ac 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index bd5d896a84..eb576a17d1 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index c4a0221f82..f0e7e4ea74 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index bd5d896a84..eb576a17d1 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index ae17a90b2b..afdd343df0 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 991aff9e40..69370d4484 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index b5c625a265..1bdda7e215 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 991aff9e40..69370d4484 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 1f60a27323..07bc01ee69 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 0108c01d9b..bb3ab78c7b 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 9db7247320..6e38a3b827 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 0108c01d9b..bb3ab78c7b 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index bff26e2434..680076a715 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 0108c01d9b..bb3ab78c7b 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index bfb109f093..7ca4c9ee6a 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 4f830c2487..79a477c0b8 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 92506af5bb..197a0c626b 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 6dd366269b..aeb5916958 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index a22900c677..00beb52741 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 75152b5d62..4f9ca2e280 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 5e15f9aa66..a32750b4e7 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 8a8374b387..49abad417e 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 7ba0ce8dba..f8dfac1ab2 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -108,21 +108,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -131,6 +119,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index cf5ecad789..b1ea468905 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 31d0a062de..eee3af2e0d 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 47b372de93..9bf6896b77 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 1396d79e01..1e15f01cf5 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 3 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 3 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 6b2b897d20..5499ca22b4 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2120,9 +2120,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 1f3e87fc71..0b9d35ce32 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 2ab9567bc1..b0222b19f8 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index dc0909eba7..14420db5e9 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 2ab9567bc1..b0222b19f8 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index e0efca14db..d06181ddfb 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 052139e299..46584663a3 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 4a1062236b..ccb3f01366 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 49a91b259f..58afecc851 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 449c321135..d39efd2065 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 56c659eb5e..76ba87e888 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 18c6323098..2f971be80e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index b0b9538f88..4debb23cd4 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2109,9 +2109,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index ea86685494..98f1b0b594 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 4cfe973b4c..f500c91ca9 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 0fdb195c98..487d537600 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index bbd46136f5..7169d60770 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index e4aa16193c..aa3468a292 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 7d1cf37e15..7af5aaf5c2 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index a2e2d0e19a..cab2dc7dcd 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -113,21 +113,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -136,6 +124,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 9406dd7609..a369096663 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2124,9 +2124,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index f917786288..d455561186 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 7d1cf37e15..7af5aaf5c2 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 7dfab147cf..24f687ba79 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 0efad29f3f..07a0d6bc35 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 87f6bd764a..f4a8126e8e 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 2e52edfe3c..80f5b3c8ac 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 08abc65984..d2f2a278bb 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index ab1713d78f..68401d2b47 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 166ecb2c4e..eaeba207ab 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -114,21 +114,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -137,6 +125,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9f27f37ea2..3fd9053030 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index b37af078a8..09c05d5926 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -114,21 +114,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -137,6 +125,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 890296f9a2..6f1af415e2 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 007dcb1e5a..0857b0da68 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 9e9db367a1..e46c41b5ef 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index c69148a688..34389d0e2f 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 5818de75bc..24f97284ff 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index a987032b2d..6fb0b364e3 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 5818de75bc..24f97284ff 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index ae7aa681b2..948e458151 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -112,21 +112,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -135,6 +123,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index a43660c811..a074af8755 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2119,9 +2119,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 4234cbb326..bbf8b2311b 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -112,21 +112,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -135,6 +123,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 6b3e2efc12..702cb15109 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -2120,9 +2120,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 593a57ece8..ed0a99992a 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f40ba967a4..3908491914 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index fc096a42d0..3c84573ee5 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 1d82194628..5aecd79380 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index ab9f7a5d78..42d3719236 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index b34cd7ed78..587918d553 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index c7bfe31b5d..ccc89a2f05 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3739024cea..df9ed3ef11 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 3dd574df52..45c79f89f1 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index a8af405ec8..973b504b15 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 59d759c252..146d9797be 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6fa53d018d..5a5eab7901 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 18e1ec20fe..748ec63f5e 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 9f63486498..8dbd06b821 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 5605d13250..dd9b9f53d2 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 34cde3b7f1..74a805ab09 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 21f385017e..9e7f56c445 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 3 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 3 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index f0c582e1f7..eb7869a002 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 5c07f23ae6..06e0a4d88a 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 09854631ab..1858a5e381 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 48fd72a426..55adbc32f2 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 4fee0a737c..17bdc5ea37 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index db20e52d4d..4efc22eaad 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 7d7481621b..08c22b83b3 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 1810b80ef6..170a6bc536 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 619e6981b6..ed428687fd 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 3243addc57..6392205cae 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 19e7402401..cd35a2ce98 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 0d6951600e..95a919bc96 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1d757c73b3..8a89d8d1ca 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index c5ad1c4229..742a058bd9 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 23ae4634d1..808201c69d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index dad1f9bd3d..29fdc239f8 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index f775ce026f..b9429a307b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 9d2b4cecad..895520869d 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 3 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 3 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 8b4ab3da18..e449db3872 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 75177a96db..9980ad4f0f 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index e94bd3e0b4..05b832b54b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index 086f531567..d0cb93702f 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 26787d443b..ff4cc64f9f 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index d9db021f75..444fe0d005 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 2ccc266723..e343e79903 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 70c8c68df0..47395218ae 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 48de206540..ce4536a015 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 75175998c7..4786e2bf89 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index a261be735c..3b94781d3e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 5465d79935..6b4e6e5a86 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 48de206540..ce4536a015 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 1d2d0b6e9e..a9d13b5ee3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index a4eb909a94..e73cce41a5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 332776dab2..dd5fa70169 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 2ac3154af1..c62f00ecd2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index b8a31286cb..848080edab 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index c71afe4b34..4ebfade371 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9b4b460abc..3632fcb729 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6ce29aa2ac..7ac47b05a7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 6f78896ec7..ba1e578d51 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 78fb4f716c..6dbefafe24 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 233608096d..c48f23f777 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 78fb4f716c..6dbefafe24 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index c3a82b74f9..e39ecf3c16 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 235ac08d34..e5ddec6e06 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index bdfb3b3ce2..8ac10c847d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 6e08bd0de4..4faaa9536d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 02285173db..0b947e63e7 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 6e08bd0de4..4faaa9536d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 1b050ab014..0db684fb69 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 6e08bd0de4..4faaa9536d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 245a6ec476..706ddffa40 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 6e08bd0de4..4faaa9536d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 00e81ecfa4..0aa93b6410 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 12077b661e..3332027493 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 4956e836b2..8de91c16e9 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 79d722a74a..afc9910e64 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index ccd53a6ebf..fb3052b37a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index ccfdfd5b53..ab1541794e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index a4df0b1aee..5ca3417be9 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index df064885d1..fe08f8a99c 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 94562f0416..b19035a492 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index f3f6f36af8..feea142618 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 2ffc0ffe95..65c64c6592 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 6cf4b77880..47047e9d0b 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index d0a194d63c..6c0f03f5e0 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 312acd9ebb..eb6abcec93 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 0acca52bb5..4ab128bfad 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index d599ca0ea0..9b370cdbfa 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 4c0d83dbec..76f4c6a86c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 2 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 2 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1af76c3799..2c57e1c342 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index b9a434befa..ec4fb5b452 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 44b2d543f5..85374293ef 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 65a7252d8d..27d1497361 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index b4562495e6..dd8e301150 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 22938474b1..8675581df3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 6cc52b42ef..66418ab186 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 282aff433c..9a9cfcd8b0 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index b4562495e6..dd8e301150 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index f9e62591ca..8d41119053 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -111,21 +111,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -134,6 +122,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 2ace1cd047..a21f6d77f4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2120,9 +2120,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index cbb723be88..f3fc7b13a1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 312acd9ebb..eb6abcec93 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 8a559652b5..7ce4e911e6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index d599ca0ea0..9b370cdbfa 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index be1e569111..3d0a652473 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index c71afe4b34..4ebfade371 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0c78b7c539..cd4a098921 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b331aec673..d6a078df8e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 6e737ffb13..55f0d07fb6 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 87082fae79..84a9673a31 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index d05c894653..a23f8fb42c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 87082fae79..84a9673a31 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 00cf3acac8..581f776111 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -108,21 +108,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -131,6 +119,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 429cec54ac..0eb18935ef 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index f8fc620382..e963b103c3 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index f8c7ce11bd..94cb6cbd8d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 22a8d2541e..278c418266 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index ebdf60a09b..49450b25c3 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 73605f8860..d24cca252f 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index ea4b7b2e48..bb6fa4d0aa 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 0f95701b53..2af75d985b 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index a6e086e641..986de73b51 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index a2aa93c3ad..95122c9eec 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -107,21 +107,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -130,6 +118,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index a4a4d6d07a..880fad0594 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2122,9 +2122,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 32b9ca38d4..12b4eebfbc 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -107,21 +107,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -130,6 +118,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index e9755176c6..ca1ff104d0 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2122,9 +2122,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 3e50076d1e..859e450404 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index def0be23d3..79eacd84fb 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 252e17bea7..b179cfbf86 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index fe3fd83441..f6d46adce7 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 5f3272dd1b..7fa90e4462 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 349f0ca0b3..3900767fde 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 0d05f378d0..9aec2e2811 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 386d4963f3..dc6c5de6b3 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 2121358b28..5b6611140c 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 386d4963f3..dc6c5de6b3 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 70a7e7c959..1b32f9e2ad 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index d3de0fd550..ba25e20bf8 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 77f685ddac..2f75f38c5b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 98bcbd0de8..733e8ceb6d 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2115,9 +2115,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index e9e8fec2f4..5f3d02bd72 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index b67bca651b..1c006e6262 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2119,9 +2119,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 06ecb3d12a..f74c1e5899 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 3c09ecccfc..36b9b7971d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index f8bc50f09c..2e9b0c64d0 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -148,21 +148,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -171,6 +159,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index ce0cd7e409..3166b84e6f 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 2a20fbaf72..50403b37ee 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 119a89bb68..04c2b32c69 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 8f6e636a4f..104816f65f 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -108,21 +108,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -131,6 +119,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 13c2838553..7b6fe727b2 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -2120,9 +2120,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 445fa0d559..1f7f87901e 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index c14c05607d..938d5b8631 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 10c8d977a5..9ea3156659 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index f037e2ed0e..2cbc66d8de 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 5f7b700ce1..3111861b23 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index dddf3d0001..a04cdc3964 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 1eadc76f10..d0877907b1 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 1077a6ea8f..91248101a1 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index c14c05607d..938d5b8631 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 5f7b700ce1..3111861b23 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index d7fbf8cd2d..50bf342991 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 1ce4ee44c1..3d2ee87512 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 00e3585b8b..5b5353f48e 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 14b52d376c..8da0d74a0c 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 8d7a7388ee..95de38e3ad 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 14b52d376c..8da0d74a0c 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 6c0da06447..09007419c6 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 14b52d376c..8da0d74a0c 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index c3194364ac..823ab4f576 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 93d73a8194..922265ed9b 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 0c92eba153..995447f72e 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 93d73a8194..922265ed9b 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index edf3ae7f95..110a1bbfa2 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 93d73a8194..922265ed9b 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index a4f02f6858..9f63f454a1 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index fb70fecaa3..40094c4392 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index ce75b434d2..e40af60438 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 349f0ca0b3..3900767fde 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 140000525a..2263bc42a4 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 93d73a8194..922265ed9b 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 4fc1023e34..40e90c7db2 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 25b309cb26..37771b8900 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 3f5d5cd7b3..08608c8631 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index fb70fecaa3..40094c4392 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index dc5619b68f..e6db65abf4 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 75c4e8e841..6e4d0c15f4 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2115,9 +2115,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 1f156f33e8..13526bc186 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 349f0ca0b3..3900767fde 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index fc693eae81..4bfe8b6528 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index eca9eb1a3a..1155eff756 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 45c3ccbd3d..ff1b5a8c62 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index c6a1dae25e..6ec973b38e 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 0356d1ed56..104a0831f4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 09be8eb280..4f17fbac71 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index c1891fe4c5..d7dee8f7b3 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index c14c05607d..938d5b8631 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index b73d7e5c6c..177b7f7646 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index c14c05607d..938d5b8631 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 98aa7299c9..d39c6acace 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index eb983a9310..c464286dec 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2116,9 +2116,6 @@ #define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index c078613edd..4789d666b4 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index aaac69360d..390b1d95f3 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 339e655953..887435b2c0 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 207dcfca99..fe604b932f 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2115,9 +2115,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 0376f11dae..2cfee133f5 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -106,21 +106,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -129,6 +117,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 96ba933946..eae7706461 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2121,9 +2121,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 8f40df0bd6..15ae0d1a18 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index abc3f32104..be67fc06a0 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -110,21 +110,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -133,6 +121,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 9cc413fce4..ec2edd5f01 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index a5d84196e0..912d02209a 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -106,21 +106,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -129,6 +117,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 96ba933946..eae7706461 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2121,9 +2121,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index e7fe5b5f21..ef8e32a58f 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 8d091ab8b3..c9ecae43a3 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 0d3bdef867..b97dabbb47 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index c1e69c3dec..3b5bd06aa9 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index bd9da08170..cf55cd5044 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index bd5d896a84..eb576a17d1 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 3a23aaa14b..183f9e9b4f 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index aaa87c6572..f342650a82 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index fe88290a4b..0c92016243 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 7973a5c3f9..ec2d1467cc 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2110,9 +2110,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index a5dce711c1..a36a03a05f 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index af6f10c514..cab93a6a9d 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2116,9 +2116,6 @@ #define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index b755cdfd4f..b5670b7ad7 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -110,21 +110,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -133,6 +121,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 6e110a05b3..88380cac69 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index ad29b939f3..acaf6dec0c 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 500000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 7bf1333470..4a20f3ee62 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 89881992ee..7f3a5b3648 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index b61be26da1..b508bcfbec 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index d39379f39d..ef2e0e52d1 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 67c6347cfc..5ea67f47f6 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 49a91b259f..58afecc851 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 84f436a0b4..371ab7db70 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -104,6 +104,20 @@ */ #define SERIAL_PORT -1 +/** + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. @@ -117,6 +131,7 @@ // MKS SGEN_L AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 // MKS Robin Nano USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 #define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE /** * Select a third serial port on the board to use for communication with the host. @@ -124,17 +139,7 @@ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ //#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 056c855f97..3c65ba28c0 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -106,22 +106,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -// Serial port 1 connects to the MKS Robin Pro Wifi connector -//#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -130,6 +117,24 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +// Serial port 1 connects to the MKS Robin Pro Wifi connector +//#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 68d11be917..030caccc4d 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 0 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 0 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index b829806e1a..ddae92aa80 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 101cd40488..172f91e414 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 1297a84225..a288d8818e 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index fea07fc246..283e06f654 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index b03e158044..3ce30e2aef 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index cbc85b914c..bbd93af218 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 0cb3d5c3ed..a1ea8dde38 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index c666c9e8a9..67762d23bf 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -105,22 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -// For programming port do NOT define -#define SERIAL_PORT_2 0 // For native port - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -129,6 +116,24 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +// For programming port do NOT define +#define SERIAL_PORT_2 0 // For native port +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index dbbac80f6f..eb8ffe6de6 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 605b0fafc0..91a1bb6d49 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -120,21 +120,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -147,6 +135,23 @@ #else #define BAUDRATE 250000 #endif +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 14bc4c7c99..ed8728ad81 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2091,9 +2091,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 84be2d8079..262aa293fb 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index f0a474ae3a..b9b89bacf1 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 876e3cbcee..9f8d051aa4 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 7026da29cb..5c84793dec 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 0e62564a80..4d157bd62a 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 4606f8048d..6766b68bb5 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 213deefd7a..e2680b501f 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 16a92b82c4..f8e297ee13 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index b9baf6d392..1d6ffea581 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 0f2b9bd083..1537e47944 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 37db9a7d27..31c1b52c4c 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 0f2b9bd083..1537e47944 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 6a4c96dff9..08bb76b774 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 0f2b9bd083..1537e47944 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 7afd3cd56a..52c348aefa 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 114201dba2..6c370853c1 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index ba2111d4de..2db7536e2b 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index c257329dd1..dd4fb8fdaf 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 1ab0d58d26..44f3f2a6d0 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 94970ddb17..122e9c311e 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -150,21 +150,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -173,6 +161,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index edb3bb25bf..a657fcb044 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2113,9 +2113,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 6aaef182db..74e1a34ef5 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -150,21 +150,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -173,6 +161,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 96785dd555..40e02bee4f 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2113,9 +2113,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index b0d1e03ea2..c3c07cd589 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 39b9b8b089..3b0f826917 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 5e12ce7ffb..0cf2830b75 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index c1a57e53ef..ee4c1f7053 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 465f142d0b..87116310fd 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 96b72734d3..c6ad362879 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index dea807086d..235b8401c1 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 2 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a6234ed14d..79a4af1ea5 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 297a693b95..f65ee1d1d4 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 5524732316..f2a5b664c1 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2114,9 +2114,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 2e2d53f063..e30b5791dc 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 20c38576b2..2d30eb57e3 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2114,9 +2114,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 054b6dbbab..546b5dd081 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -125,21 +125,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -148,6 +136,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index b3093c4a2c..a50b22216c 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 7519001374..355bc883c4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index be048566b5..a51c880ba7 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index be9b5db7b1..39c18ddca8 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index bb49874ca7..c42226af06 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 43a772d7d0..efd3936f93 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index a1c1c3529d..c8595c2f7b 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 72c599f1b1..51b3c2cc63 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 267a22a10f..4816d64a11 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 8e41f993c8..46c2781136 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 267a22a10f..4816d64a11 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index ce961614fa..c51ff49272 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 5 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 5 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 69b5176e6d..3ce1d463a1 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 6fefe5ecbd..d32241f842 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -121,21 +121,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -144,6 +132,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 5b6b52e84b..39c04c14e6 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 0d6568ef75..1f6a820045 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 240bc45477..51c9a1d7ae 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 4edcae5854..e092f1c5db 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index e0c67b2389..a8e56c3b15 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index aaea9b4f78..15e6f6e7ee 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 7e80ca3f96..e4b60a78e9 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 2c187bfaf5..5664e003ee 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 3 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 3 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 40df9442f2..b5a36ea7a6 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 0891d54837..61bda7199d 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index dafdb77b0d..db04a73b6d 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -106,21 +106,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -129,6 +117,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 463a66099d..987b73c45b 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2117,9 +2117,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index a9bf9f08f2..89defe1a96 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -108,21 +108,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -131,6 +119,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index daf34711d8..87dc99ad61 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index c0b493ebee..05f931139d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -109,21 +109,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -132,6 +120,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index daf34711d8..87dc99ad61 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 682fa92d00..28406f1963 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -108,21 +108,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -131,6 +119,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index daf34711d8..87dc99ad61 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 70d6982257..c10d4d52a3 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -109,23 +109,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#if DISABLED(SAPPHIRE_PLUS_TMC_UART) - #define SERIAL_PORT_2 1 -#endif - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -134,6 +120,25 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#if DISABLED(SAPPHIRE_PLUS_TMC_UART) + #define SERIAL_PORT_2 1 +#endif +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 5925371a3c..66a3597eaa 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2122,9 +2122,6 @@ #define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index b9e11b592d..f4163d9266 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -109,21 +109,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -132,6 +120,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 53e49f9f79..bf2f02368c 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 081a787c67..9d2969c2c4 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index b8b6a1d478..f585099ea9 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index cde6cabdc3..d809be456e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c586f40140..6850c8f5bf 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index ffd21a24de..eebf9c5d24 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 422c4ec3be..633ae7141a 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index da5bee09ce..e8e6a1bdcb 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 291dcea3cc..a490c99740 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 081ef6b3b3..26ed515cb0 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -121,21 +121,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -144,6 +132,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 03099f83b2..7df4e7ff2c 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2129,9 +2129,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index ba94e28f01..d6435d5f2a 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index fc542eeb20..55460f4288 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 863fa21e83..4f9e1bc4cf 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index fc542eeb20..55460f4288 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index f58eedb724..8014accb8f 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -104,6 +104,20 @@ */ #define SERIAL_PORT 0 +/** + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. @@ -123,6 +137,7 @@ * | | [O] RX | * `------------´---------------------´ */ +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE /** * Select a third serial port on the board to use for communication with the host. @@ -130,17 +145,7 @@ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ //#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 6674bc9e70..b871f55cb5 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 313da5e753..d1aae3e1ba 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 828d007f4e..70f376df34 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 4a9f93f560..6a41d6a517 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 9586674428..43b6d31db4 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index fa455ffab7..046ea68e2a 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index ccef16502f..588a0f93a6 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index b7e6d56ad7..0621f160d5 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 62ade58359..5bd2b8fe40 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 614ba76fac..4d790e3367 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index f14e4b57a1..34007abd93 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 9fcfed3045..a230320b2b 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index c85db15d0f..afc3ab69ff 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 5ea6908db2..8eb84bc7cd 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -107,21 +107,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 // enables the TFT24 touchscreen mode - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -130,6 +118,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 // enables the TFT24 touchscreen mode +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index e689e63f4a..0a06d3fdbc 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 71ade800ee..6772c0e037 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -117,21 +117,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -140,6 +128,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 25ef10f840..02dc3d5df6 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2119,9 +2119,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 94ec97c709..e53d833a16 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -120,21 +120,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -143,6 +131,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 61dbccc951..ae4cb7ce53 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 8d55a3d528..c35de695a8 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 3 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 3 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index e6ea8db25c..caad169304 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2119,9 +2119,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 29b942e2fe..e8bfa1ea2b 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 46a40f51ec..bc97f8cf26 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 5e7675592d..d03f22a7c4 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 46a40f51ec..bc97f8cf26 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index a719938e7a..75ad6b50ef 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index b71677cb8e..7d9b3615c5 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 5f0d1ec22b..6cf9670e05 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 87b97a0b7f..5765b630be 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index ab63eebc50..87f9d222c4 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index f37bc87da5..d4b12828f1 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 3 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 1bd2aaa8a8..386c25f5af 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2119,9 +2119,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index f37ccf1ff2..2157b0a960 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 6334471382..20a42f063b 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 1d97ccab9a..a736e60a33 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 6334471382..20a42f063b 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 8ca34f2188..90f81e1318 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index e7c1d96d39..e0c3892e66 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index f3be863f82..6e4a5995b8 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index dc8acca676..c2e1308487 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index f8ce73fb49..99c12ec4b4 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 1e4b7596d0..c16346727c 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 85b1ae3770..0cf50c0e0a 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 1e4b7596d0..c16346727c 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 91206e5fdc..a84e0c95db 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 1e4b7596d0..c16346727c 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 76733c4b31..362f93cedd 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index fa2d0361ad..cd99a8b8d9 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 5a4c94b315..fa5ef1edfd 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -110,21 +110,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -133,6 +121,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index df313022db..ddbc475414 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index f84610a9c3..d88fe09495 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 72b3b6a7b1..a043fd56d5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index c05d30fcb7..586b0cb08f 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT -1 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 85c9a673f1..e48f07cfad 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 9a26d3af53..1b72427399 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 520b59e951..158cef92a3 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 089724e117..6206bbbef0 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index e7c1d96d39..e0c3892e66 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index cc237f32a0..08459748f0 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 29334fa881..2678be605d 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 5ebb2e4948..314b722a02 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index ded362437f..f2d93c4e92 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -109,21 +109,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -132,6 +120,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 115200 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index f6a9c43f73..8d0b167079 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 1a4e52493a..4d2d34fb69 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2118,9 +2118,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 6b336002e4..9d46ccc831 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 331e989625..5b3ba8ea88 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index ae04af21a7..2c6ad8be7c 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 443521fe11..1b157f640b 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 0aa50c32b2..b77e220e97 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -105,21 +105,9 @@ #define SERIAL_PORT 0 /** - * Select a secondary serial port on the board to use for communication with the host. - * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. - * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * Select a third serial port on the board to use for communication with the host. - * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_3 1 - -/** - * This setting determines the communication speed of the printer. + * Serial Port Baud Rate + * This is the default communication speed for all serial ports. + * Set the baud rate defaults for additional serial ports below. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. @@ -128,6 +116,23 @@ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000 +//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate + +/** + * Select a secondary serial port on the board to use for communication with the host. + * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. + * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 +//#define BAUDRATE_2 250000 // Enable to override BAUDRATE + +/** + * Select a third serial port on the board to use for communication with the host. + * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1 + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_3 1 +//#define BAUDRATE_3 250000 // Enable to override BAUDRATE // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 51f34b61cd..24182f51a8 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2116,9 +2116,6 @@ //#define SERIAL_XON_XOFF #endif -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD.