mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-09-16 09:10:32 +00:00
✨ Sovol SV01 / SKR Mini E3 V3 (#745)
This commit is contained in:
0Hertz
GitHub
parent
9e93858ad3
commit
c96d8ea793
5 changed files with 7747 additions and 0 deletions
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -0,0 +1,12 @@
|
|||
## SKR Mini E3 V3 Board
|
||||
|
||||
These files configure Marlin for a Sovol SV01 with `MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0` board installed with silent stepper drivers and a Fixed Probe.
|
||||
The probe is configured to use the Z endstop port on the board.
|
||||
|
||||
This Is For test only.
|
||||
|
||||
!!!! caution !!! use at your own risk
|
||||
|
||||
### Nozzle to Probe Offsets
|
||||
|
||||
You'll need to to adjust the `NOZZLE_TO_PROBE_OFFSET` values according to your probe's mounting location.
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue