3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-17 01:27:55 +00:00
Code Issues Releases Wiki Activity

Geeetech A10T/A20T config patches

Browse source
This commit is contained in:
Scott Lahteine 2020-02-24 06:34:45 -06:00
parent 1607ee5007
commit ca9e06994d
2 changed files with 9 additions and 9 deletions
Download patch file Download diff file Expand all files Collapse all files

10
config/examples/Geeetech/A10T/Configuration.h
View file

@ -930,14 +930,14 @@
* *
* Specify a Probe position as { X, Y, Z } * Specify a Probe position as { X, Y, Z }
*/ */
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } #define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
// X and Y axis travel speed (mm/m) between probes // X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000 #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@ -979,7 +979,7 @@
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -5 #define Z_PROBE_OFFSET_RANGE_MIN -20
#define Z_PROBE_OFFSET_RANGE_MAX 0 #define Z_PROBE_OFFSET_RANGE_MAX 0
// Enable the M48 repeatability test to test probe accuracy // Enable the M48 repeatability test to test probe accuracy
@ -1070,8 +1070,8 @@
#define Y_BED_SIZE 230 #define Y_BED_SIZE 230
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS -10 #define X_MIN_POS -5
#define Y_MIN_POS -5 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE

8
config/examples/Geeetech/A20T/Configuration.h
View file

@ -930,14 +930,14 @@
* *
* Specify a Probe position as { X, Y, Z } * Specify a Probe position as { X, Y, Z }
*/ */
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } #define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
// X and Y axis travel speed (mm/m) between probes // X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000 #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@ -1070,8 +1070,8 @@
#define Y_BED_SIZE 255 #define Y_BED_SIZE 255
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS -10 #define X_MIN_POS -5
#define Y_MIN_POS -5 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE