3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-17 17:47:57 +00:00
Code Issues Releases Wiki Activity

✨ FILAMENT_MOTION_DISTANCE_MM

Browse source 
MarlinFirmware/Marlin#27812
This commit is contained in:
Scott Lahteine 2025-04-22 14:31:51 -05:00
parent 23cce511a5
commit f01c64b9d1
382 changed files with 1910 additions and 764 deletions
Download patch file Download diff file Expand all files Collapse all files

7
config/examples/Creality/CR-10 Max/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2049,8 +2049,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2086,7 +2089,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2049,8 +2049,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2086,7 +2089,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
View file

@ -2050,8 +2050,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2087,7 +2090,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h
View file

@ -2045,8 +2045,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2082,7 +2085,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -2061,8 +2061,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2098,7 +2101,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h
View file

@ -2064,8 +2064,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2101,7 +2104,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V3/Stock/Configuration.h
View file

@ -2064,8 +2064,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2101,7 +2104,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/CrealityV1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S Pro/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/CrealityV1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20/Stock/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-30 PrintMill/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-6 SE/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-8/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Max Neo/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Max/Configuration.h
View file

@ -2045,8 +2045,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2082,7 +2085,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Neo/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 S1 Plus/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 S1 Pro/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h
View file

@ -2038,8 +2038,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2075,7 +2078,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/Creality free-runs/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/CrealityV1/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/CrealityV422/Configuration.h
View file

@ -2048,8 +2048,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2085,7 +2088,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/CrealityV427/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
View file

@ -2047,8 +2047,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2084,7 +2087,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-4/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h
View file

@ -2051,8 +2051,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2088,7 +2091,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h
View file

@ -2051,8 +2051,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2088,7 +2091,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h
View file

@ -2049,8 +2049,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2086,7 +2089,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h
View file

@ -2055,8 +2055,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2092,7 +2095,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-5 S1/Configuration.h
View file

@ -2083,8 +2083,11 @@
//#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION
//#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1
@ -2120,7 +2123,7 @@
//#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR

Some files were not shown because too many files have changed in this diff Show more