mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-13 15:50:04 +00:00

History

GitHub Actions 65e624a894 Examples Extras		2025-09-07 02:50:43 +00:00
..
Configuration.h	Examples Customizations	2025-09-07 02:50:42 +00:00
Configuration_adv.h	Examples Customizations	2025-09-07 02:50:42 +00:00
README.md	Examples Extras	2025-09-07 02:50:43 +00:00

CR-10 MAX Configurations for Marlin Firmware

Marlin DGUS UI "Reloaded" Instructions

To use DGUS_LCD_UI RELOADED the stock LCD must be flashed with custom firmware.

Download the DWIN_SET archive from https://github.com/Neo2003/DGUS-reloaded/releases/download/1.0.3/DWIN_SET.tar.gz
Extract the contents of the archive. You should now have a folder called DWIN_SET.

Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
Copy the DWIN_SET folder to the root of the Micro-SD card.
Unmount and unplug your Micro-SD card.

Turn off and unplug your printer (both power and USB).
You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
Insert the Micro-SD card into the screen SD slot.
Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
After a few seconds the screen background will turn blue and the firmware flash will begin. Do not cut power to the printer while the procedure is running!
When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
The touch-screen firmware is now up-to-date.