3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-03-25 15:42:16 +00:00
Code Issues Releases Wiki Activity
MarlinFirmware-Configurations/config/examples/linear_axes/RAMPS 5 LINEAR_AXES
History
Exact
GitHub Actions 40748f3972 Examples Extras
2025-03-24 06:14:05 +00:00
..
Configuration.h Examples Customizations 2025-03-24 06:14:03 +00:00
Configuration_adv.h Examples Customizations 2025-03-24 06:14:03 +00:00
README.md Examples Extras 2025-03-24 06:14:05 +00:00

README.md

RAMPS with 5 Linear Axes (no extruders)

The axes are controlled with parameters X, Y, Z, U, and V.

All axes in this example are given the same steps/mm, acceleration, etc.

Note

Internal to Marlin the first three additional axes are called I, J, and K. However, the G-code parameters for extra axes are assigned using AXIS4_NAME, AXIS5_NAME, AXIS6_NAME, etc.

In this example Marlin automatically maps the extra axes to the unused E0 and E1 stepper ports. Endstop pins must be assigned manually, so this example assigns I_STOP_PIN and J_STOP_PIN to pins 65 and 66 on the AUX-2 port.