3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-02-02 06:28:40 +00:00
Code Issues Releases Wiki Activity
MarlinFirmware-Configurations/config/examples/BIQU/BX
History
Scott Lahteine 8022d74a46 Examples Extras
2025-01-16 12:55:34 -06:00
..
Configuration.h Examples Customizations 2025-01-16 12:55:33 -06:00
Configuration_adv.h Examples Customizations 2025-01-16 12:55:33 -06:00
README.md Examples Extras 2025-01-16 12:55:34 -06:00

README.md

BIQU BX Configuration

In Configuration.h enable the MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3 option at the top to specify the BTT SKR SE BX V3.0 motherboard, otherwise the V2.0 board will be applied (slightly farther down).

Enable the BX_ALL_METAL_HOTEND option to permit higher printing temperatures for the newer H2 extruder with an all-metal heatbreak.

Enable the BX_SWAP_ZM_E1M option to swap Z and E1 motors if they swapped from the factory. This will fix potential issues with G34 - Z Steppers Auto-Alignment not working correctly.

Homing with a Probe

This configuration retains the use of homing with a Z limit switch. If you If you want to home with the inductive probe, remove your Z limit switch & bracket and enable (uncomment) USE_PROBE_FOR_Z_HOMING and Z_SAFE_HOMING.