3DPrinting/MarlinFirmware-Configurations
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-17 09:37:57 +00:00
Code Issues Releases Wiki Activity
MarlinFirmware-Configurations/config/examples/AnyCubic/Vyper
History
Scott Lahteine 1292d42804 ✨ GCODE_VARIABLES 
MarlinFirmware/Marlin#24654
2024-01-22 18:05:27 -06:00
..
LCD files/English_Chinese 🚸 Compress DWIN sets 2023-12-23 18:25:30 -06:00
Configuration.h ✨ BIQU_MICROPROBE_V1/V2 2024-01-21 06:00:25 -06:00
Configuration_adv.h ✨ GCODE_VARIABLES 2024-01-22 18:05:27 -06:00
README.md ✨ AnyCubic Vyper (#905) 2023-03-22 02:41:29 -05:00

README.md

Anycubic Vyper Support

This configuration is based on the published firmware v2.4.5 from Anycubic. It is not the authoritative source, but has been carefully re-built by looking at their firmware.

LCD Languages

The stock Vyper LCD supports English and Chinese. This firmware is located in the English_Chinese folder. This folder was downloaded from the Anycubic site.

An English and German version is available in the English_German folder. To switch, copy the entire DWIN_SET folder to the top level of an SD card, insert the SD card into the LCD and power cycle the LCD.