1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-05 02:19:14 +00:00
MarlinFirmware/Marlin/src/pins/pins_RAMPS_DUO.h

124 lines
3.2 KiB
C
Raw Normal View History

2017-07-18 23:29:06 +00:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega or Due with RAMPS Duo pin assignments
*
* Applies to the following boards:
*
* RAMPS_DUO_EFB (Hotend, Fan, Bed)
* RAMPS_DUO_EEB (Hotend0, Hotend1, Bed)
* RAMPS_DUO_EFF (Hotend, Fan0, Fan1)
* RAMPS_DUO_EEF (Hotend0, Hotend1, Fan)
* RAMPS_DUO_SF (Spindle, Controller Fan)
*
* Differences between
* RAMPS_14 | RAMPS_DUO
* A9/D63 | A12/D66
* A10/D64 | A13/D67
* A11/D65 | A14/D68
* A12/D66 | A15/D69
* A13 | A9
* A14 | A10
* A15 | A11
*/
#if !defined(__SAM3X8E__) && !defined(__AVR_ATmega2560__)
#error "Oops! Make sure you have 'Arduino Due' or 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS Duo"
#endif
#define IS_RAMPS_DUO
#include "pins_RAMPS.h"
//
// Temperature Sensors
//
#undef TEMP_0_PIN
#define TEMP_0_PIN 9 // Analog Input
#undef TEMP_1_PIN
#define TEMP_1_PIN 11 // Analog Input
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 10 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 69 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 69 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#undef LCD_PINS_D4
#define LCD_PINS_D4 68
#undef LCD_PINS_D5
#define LCD_PINS_D5 69
#undef LCD_PINS_D7
#define LCD_PINS_D7 67
#endif
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#undef BTN_EN1
#define BTN_EN1 67
#undef BTN_ENC
#define BTN_ENC 66
#elif ENABLED(MINIPANEL)
#undef DOGLCD_CS
#define DOGLCD_CS 69
#undef LCD_BACKLIGHT_PIN
#define LCD_BACKLIGHT_PIN 68 // backlight LED on A14/D68
#undef KILL_PIN
#define KILL_PIN 67
#undef BTN_EN2
#define BTN_EN2 66
#else
#if ENABLED(REPRAPWORLD_KEYPAD)
#undef BTN_EN1
#define BTN_EN1 67 // encoder
#undef BTN_ENC
#define BTN_ENC 66 // enter button
#elif ENABLED(PANEL_ONE)
#undef BTN_EN2
#define BTN_EN2 66 // AUX2 PIN 4
#endif
#endif
#endif // NEWPANEL
#endif // ULTRA_LCD