3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-26 04:05:23 +00:00
Code Issues Releases Wiki Activity
01a7b5cc97
MarlinFirmware/ArduinoAddons/Arduino_0.xx/Sanguino/boards.txt

100 lines
2.9 KiB
Plaintext
Raw Normal View History

Added modified Sanguino files
2011-11-14 17:27:47 +00:00
##############################################################
sanguino.name=Sanguino
sanguino.upload.protocol=stk500
sanguino.upload.maximum_size=63488
sanguino.upload.speed=38400
sanguino.bootloader.low_fuses=0xFF
sanguino.bootloader.high_fuses=0xDC
sanguino.bootloader.extended_fuses=0xFD
sanguino.bootloader.path=atmega644p
sanguino.bootloader.file=ATmegaBOOT_644P.hex
sanguino.bootloader.unlock_bits=0x3F
sanguino.bootloader.lock_bits=0x0F
sanguino.build.mcu=atmega644p
sanguino.build.f_cpu=16000000L
sanguino.build.core=arduino
Add additional Sanguino bard versions to boards.txt ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 21:17:42 +00:00
##############################################################
atmega644.name=Sanguino W/ ATmega644P
atmega644.upload.protocol=stk500
atmega644.upload.maximum_size=63488
atmega644.upload.speed=57600
atmega644.bootloader.low_fuses=0xFF
atmega644.bootloader.high_fuses=0x9A
atmega644.bootloader.extended_fuses=0xFF
atmega644.bootloader.path=atmega
atmega644.bootloader.file=ATmegaBOOT_168_atmega644p.hex
#atmega644.bootloader.file=ATmegaBOOT_644P.hex
atmega644.bootloader.unlock_bits=0x3F
atmega644.bootloader.lock_bits=0x0F
atmega644.build.mcu=atmega644p
atmega644.build.f_cpu=16000000L
atmega644.build.core=arduino
##############################################################
atmega12848m.name=Sanguino W/ ATmega1284p 8mhz
atmega12848m.upload.protocol=stk500
atmega12848m.upload.maximum_size=131072
atmega12848m.upload.speed=19200
Changed 1284p fuse setting for 8, 16 and 20 Mhz Symtopns: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-02 13:13:15 +00:00
atmega12848m.bootloader.low_fuses=0xD6
atmega12848m.bootloader.high_fuses=0xDA
atmega12848m.bootloader.extended_fuses=0xFD
Add additional Sanguino bard versions to boards.txt ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 21:17:42 +00:00
atmega12848m.bootloader.path=atmega
atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
atmega12848m.bootloader.unlock_bits=0x3F
atmega12848m.bootloader.lock_bits=0x0F
atmega12848m.build.mcu=atmega1284p
atmega12848m.build.f_cpu=8000000L
atmega12848m.build.core=arduino
##############################################################
atmega1284.name=Sanguino W/ ATmega1284p 16mhz
atmega1284.upload.protocol=stk500
atmega1284.upload.maximum_size=131072
atmega1284.upload.speed=57600
Changed 1284p fuse setting for 8, 16 and 20 Mhz Symtopns: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-02 13:13:15 +00:00
atmega1284.bootloader.low_fuses=0xD6
atmega1284.bootloader.high_fuses=0xDA
atmega1284.bootloader.extended_fuses=0xFD
Add additional Sanguino bard versions to boards.txt ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 21:17:42 +00:00
atmega1284.bootloader.path=atmega
atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
atmega1284.bootloader.unlock_bits=0x3F
atmega1284.bootloader.lock_bits=0x0F
atmega1284.build.mcu=atmega1284p
atmega1284.build.f_cpu=16000000L
atmega1284.build.core=arduino
##############################################################
atmega1284s.name=Sanguino W/ ATmega1284p 20mhz
atmega1284s.upload.protocol=stk500
atmega1284s.upload.maximum_size=131072
atmega1284s.upload.speed=57600
Changed 1284p fuse setting for 8, 16 and 20 Mhz Symtopns: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay
2014-02-02 13:13:15 +00:00
atmega1284s.bootloader.low_fuses=0xD6
atmega1284s.bootloader.high_fuses=0xDA
atmega1284s.bootloader.extended_fuses=0xFD
Add additional Sanguino bard versions to boards.txt ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 21:17:42 +00:00
atmega1284s.bootloader.path=atmega
atmega1284s.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
atmega1284s.bootloader.unlock_bits=0x3F
atmega1284s.bootloader.lock_bits=0x0F
atmega1284s.build.mcu=atmega1284p
atmega1284s.build.f_cpu=20000000L
atmega1284s.build.core=arduino
#
Reference in New Issue Copy Permalink