MarlinFirmware/Marlin/thermistortable_6.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
const short temptable_6[][2] PROGMEM = {
  { OV(   1), 350 },
  { OV(  28), 250 }, // top rating 250C
  { OV(  31), 245 },
  { OV(  35), 240 },
  { OV(  39), 235 },
  { OV(  42), 230 },
  { OV(  44), 225 },
  { OV(  49), 220 },
  { OV(  53), 215 },
  { OV(  62), 210 },
  { OV(  71), 205 }, // fitted graphically
  { OV(  78), 200 }, // fitted graphically
  { OV(  94), 190 },
  { OV( 102), 185 },
  { OV( 116), 170 },
  { OV( 143), 160 },
  { OV( 183), 150 },
  { OV( 223), 140 },
  { OV( 270), 130 },
  { OV( 318), 120 },
  { OV( 383), 110 },
  { OV( 413), 105 },
  { OV( 439), 100 },
  { OV( 484),  95 },
  { OV( 513),  90 },
  { OV( 607),  80 },
  { OV( 664),  70 },
  { OV( 781),  60 },
  { OV( 810),  55 },
  { OV( 849),  50 },
  { OV( 914),  45 },
  { OV( 914),  40 },
  { OV( 935),  35 },
  { OV( 954),  30 },
  { OV( 970),  25 },
  { OV( 978),  22 },
  { OV(1008),   3 },
  { OV(1023),   0 } // to allow internal 0 degrees C
};