MarlinFirmware/Marlin/src/lcd/dogm/status_screen_DOGM.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * status_screen_DOGM.h
 *
 * Standard Status Screen for Graphical Display
 */

#ifndef _STATUS_SCREEN_DOGM_H_
#define _STATUS_SCREEN_DOGM_H_

FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) {
  const char * const str = itostr3(temp);
  lcd_moveto(x - (str[0] != ' ' ? 0 : str[1] != ' ' ? 1 : 2) * DOG_CHAR_WIDTH / 2, y);
  lcd_put_u8str(str);
  lcd_put_u8str_rom(PSTR(LCD_STR_DEGREE " "));
}

#ifndef HEAT_INDICATOR_X
  #define HEAT_INDICATOR_X 8
#endif

FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) {
  #if !HEATER_IDLE_HANDLER
    UNUSED(blink);
  #endif

  #if HAS_TEMP_BED
    const bool isBed = heater < 0;
  #else
    constexpr bool isBed = false;
  #endif

  if (PAGE_UNDER(7)) {
    #if HEATER_IDLE_HANDLER
      const bool is_idle = (!isBed ? thermalManager.is_heater_idle(heater) :
        #if HAS_TEMP_BED
          thermalManager.is_bed_idle()
        #else
          false
        #endif
      );

      if (blink || !is_idle)
    #endif
    _draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7); }

  if (PAGE_CONTAINS(21, 28))
    _draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28);

  if (PAGE_CONTAINS(17, 20)) {
    const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X,
                  y = isBed ? 18 : 17;
    if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) {
      u8g.setColorIndex(0); // white on black
      u8g.drawBox(x + h, y, 2, 2);
      u8g.setColorIndex(1); // black on white
    }
    else {
      u8g.drawBox(x + h, y, 2, 2);
    }
  }
}

FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) {
  if (blink)
    lcd_put_u8str_rom(pstr);
  else {
    if (!axis_homed[axis])
      lcd_put_wchar('?');
    else {
      #if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
        if (!axis_known_position[axis])
          lcd_put_wchar(' ');
        else
      #endif
          lcd_put_u8str_rom(pstr);
    }
  }
}

inline void lcd_implementation_status_message(const bool blink) {
  #if ENABLED(STATUS_MESSAGE_SCROLLING)
    static bool last_blink = false;
    const uint8_t slen = utf8_strlen(lcd_status_message);
    const char *stat = lcd_status_message + status_scroll_pos;
    if (slen <= LCD_WIDTH)
      lcd_put_u8str(stat);                                      // The string isn't scrolling
    else {
      if (status_scroll_pos <= slen - LCD_WIDTH)
        lcd_put_u8str(stat);                                    // The string fills the screen
      else {
        uint8_t chars = LCD_WIDTH;
        if (status_scroll_pos < slen) {                         // First string still visible
          lcd_put_u8str(stat);                                  // The string leaves space
          chars -= slen - status_scroll_pos;                    // Amount of space left
        }
        lcd_put_wchar('.');                                         // Always at 1+ spaces left, draw a dot
        if (--chars) {
          if (status_scroll_pos < slen + 1)                     // Draw a second dot if there's space
            --chars, lcd_put_wchar('.');
          if (chars) lcd_put_u8str_max(lcd_status_message, chars);  // Print a second copy of the message
        }
      }
      if (last_blink != blink) {
        last_blink = blink;
        // Skip any non-printing bytes
        if (status_scroll_pos < slen) while (!PRINTABLE(lcd_status_message[status_scroll_pos])) status_scroll_pos++;
        if (++status_scroll_pos >= slen + 2) status_scroll_pos = 0;
      }
    }
  #else
    UNUSED(blink);
    lcd_put_u8str(lcd_status_message);
  #endif
}

static void lcd_implementation_status_screen() {

  const bool blink = lcd_blink();

  #if FAN_ANIM_FRAMES > 2
    static bool old_blink;
    static uint8_t fan_frame;
    if (old_blink != blink) {
      old_blink = blink;
      if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0;
    }
  #endif

  // Status Menu Font
  lcd_setFont(FONT_STATUSMENU);

  //
  // Fan Animation
  //
  // Draws the whole heading image as a B/W bitmap rather than
  // drawing the elements separately.
  // This was done as an optimization, as it was slower to draw
  // multiple parts compared to a single bitmap.
  //
  // The bitmap:
  // - May be offset in X
  // - Includes all nozzle(s), bed(s), and the fan.
  //
  // TODO:
  //
  // - Only draw the whole header on the first
  //   entry to the status screen. Nozzle, bed, and
  //   fan outline bits don't change.
  //
  if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {

    u8g.drawBitmapP(
      STATUS_SCREEN_X, STATUS_SCREEN_Y,
      (STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT,
      #if HAS_FAN0
        #if FAN_ANIM_FRAMES > 2
          fan_frame == 1 ? status_screen1_bmp :
          fan_frame == 2 ? status_screen2_bmp :
          #if FAN_ANIM_FRAMES > 3
            fan_frame == 3 ? status_screen3_bmp :
          #endif
        #else
          blink && fanSpeeds[0] ? status_screen1_bmp :
        #endif
      #endif
      status_screen0_bmp
    );

  }

  //
  // Temperature Graphics and Info
  //

  if (PAGE_UNDER(28)) {
    // Extruders
    HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink);

    // Heated bed
    #if HOTENDS < 4 && HAS_TEMP_BED
      _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink);
    #endif

    #if HAS_FAN0
      if (PAGE_CONTAINS(20, 27)) {
        // Fan
        const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
        if (per) {
          lcd_moveto(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y);
          lcd_put_u8str(itostr3(per));
          lcd_put_wchar('%');
        }
      }
    #endif
  }

  #if ENABLED(SDSUPPORT)
    //
    // SD Card Symbol
    //
    if (card.isFileOpen() && PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) {
      // Upper box
      u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7);     // 42-48 (or 41-47)
      // Right edge
      u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5);     // 44-48 (or 43-47)
      // Bottom hollow box
      u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4);  // 49-52 (or 48-51)
      // Corner pixel
      u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION));         // 43 (or 42)
    }
  #endif // SDSUPPORT

  #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
    //
    // Progress bar frame
    //
    #define PROGRESS_BAR_X 54
    #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)

    if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION)))       // 49-52 (or 49-51)
      u8g.drawFrame(
        PROGRESS_BAR_X, 49,
        PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION)
      );

    #if DISABLED(LCD_SET_PROGRESS_MANUALLY)
      const uint8_t progress_bar_percent = card.percentDone();
    #endif

    if (progress_bar_percent > 1) {

      //
      // Progress bar solid part
      //

      if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION)))     // 50-51 (or just 50)
        u8g.drawBox(
          PROGRESS_BAR_X + 1, 50,
          (uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress_bar_percent * 0.01), 2 - (TALL_FONT_CORRECTION)
        );

      //
      // SD Percent Complete
      //

      #if ENABLED(DOGM_SD_PERCENT)
        if (PAGE_CONTAINS(41, 48)) {
          // Percent complete
          lcd_moveto(55, 48);
          lcd_put_u8str(itostr3(progress_bar_percent));
          lcd_put_wchar('%');
        }
      #endif
    }

    //
    // Elapsed Time
    //

    #if DISABLED(DOGM_SD_PERCENT)
      #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2))
    #else
      #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH)
    #endif

    if (PAGE_CONTAINS(41, 48)) {
      char buffer[10];
      duration_t elapsed = print_job_timer.duration();
      bool has_days = (elapsed.value >= 60*60*24L);
      uint8_t len = elapsed.toDigital(buffer, has_days);
      lcd_moveto(SD_DURATION_X, 48);
      lcd_put_u8str(buffer);
    }

  #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY

  //
  // XYZ Coordinates
  //

  #define XYZ_BASELINE (30 + INFO_FONT_HEIGHT)

  #define X_LABEL_POS  3
  #define X_VALUE_POS 11
  #define XYZ_SPACING 40

  #if ENABLED(XYZ_HOLLOW_FRAME)
    #define XYZ_FRAME_TOP 29
    #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3
  #else
    #define XYZ_FRAME_TOP 30
    #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1
  #endif

  // Before homing the axis letters are blinking 'X' <-> '?'.
  // When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
  // When everything is ok you see a constant 'X'.

  static char xstring[5], ystring[5], zstring[7];
  #if ENABLED(FILAMENT_LCD_DISPLAY)
    static char wstring[5], mstring[4];
  #endif

  // At the first page, regenerate the XYZ strings
  if (page.page == 0) {
    strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS])));
    strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS])));
    strcpy(zstring, ftostr52sp(FIXFLOAT(LOGICAL_Z_POSITION(current_position[Z_AXIS]))));
    #if ENABLED(FILAMENT_LCD_DISPLAY)
      strcpy(wstring, ftostr12ns(filament_width_meas));
      strcpy(mstring, itostr3(100.0 * (
          parser.volumetric_enabled
            ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
            : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
        )
      ));
    #endif
  }

  if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) {

    #if ENABLED(XYZ_HOLLOW_FRAME)
      u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40  7: 29-39
    #else
      u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT);   // 8: 30-39  7: 30-37
    #endif

    if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) {

      #if DISABLED(XYZ_HOLLOW_FRAME)
        u8g.setColorIndex(0); // white on black
      #endif

      lcd_moveto(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(X_AXIS, PSTR(MSG_X), blink);
      lcd_moveto(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_put_u8str(xstring);

      lcd_moveto(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink);
      lcd_moveto(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_put_u8str(ystring);

      lcd_moveto(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink);
      lcd_moveto(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_put_u8str(zstring);

      #if DISABLED(XYZ_HOLLOW_FRAME)
        u8g.setColorIndex(1); // black on white
      #endif
    }
  }

  //
  // Feedrate
  //

  if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) {
    lcd_setFont(FONT_MENU);
    lcd_moveto(3, 50);
    lcd_put_wchar(LCD_STR_FEEDRATE[0]);

    lcd_setFont(FONT_STATUSMENU);
    lcd_moveto(12, 50);
    lcd_put_u8str(itostr3(feedrate_percentage));
    lcd_put_wchar('%');

    //
    // Filament sensor display if SD is disabled
    //
    #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT)
      lcd_moveto(56, 50);
      lcd_put_u8str(wstring);
      lcd_moveto(102, 50);
      lcd_put_u8str(mstring);
      lcd_put_wchar('%');
      lcd_setFont(FONT_MENU);
      lcd_moveto(47, 50);
      lcd_put_wchar(LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_rom(PSTR(LCD_STR_FILAM_DIA));
      lcd_moveto(93, 50);
      lcd_put_wchar(LCD_STR_FILAM_MUL[0]);
    #endif
  }

  //
  // Status line
  //

  #define STATUS_BASELINE (55 + INFO_FONT_HEIGHT)

  if (PAGE_CONTAINS(STATUS_BASELINE - (INFO_FONT_HEIGHT - 1), STATUS_BASELINE)) {
    lcd_moveto(0, STATUS_BASELINE);

    #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
      if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) {  //Display both Status message line and Filament display on the last line
        lcd_implementation_status_message(blink);
      }
      else {
        lcd_put_u8str_rom(PSTR(LCD_STR_FILAM_DIA));
        lcd_put_wchar(':');
        lcd_put_u8str(wstring);
        lcd_put_u8str_rom(PSTR("  " LCD_STR_FILAM_MUL));
        lcd_put_wchar(':');
        lcd_put_u8str(mstring);
        lcd_put_wchar('%');
      }
    #else
      lcd_implementation_status_message(blink);
    #endif
  }
}

#endif // _STATUS_SCREEN_DOGM_H_