1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-12 21:41:34 +00:00
MarlinFirmware/Marlin/src/feature/power.cpp

221 lines
5.8 KiB
C++
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 14:00:57 +00:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 04:57:50 +00:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 03:20:14 +00:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* power.cpp - power control
*/
#include "../inc/MarlinConfig.h"
#include "power.h"
2019-09-01 00:44:45 +00:00
#include "../module/stepper/indirection.h"
#include "../MarlinCore.h"
2021-06-25 19:50:09 +00:00
#if ENABLED(PS_OFF_SOUND)
#include "../libs/buzzer.h"
#endif
#if defined(PSU_POWERUP_GCODE) || defined(PSU_POWEROFF_GCODE)
#include "../gcode/gcode.h"
#endif
#if EITHER(PSU_CONTROL, AUTO_POWER_CONTROL)
2020-07-09 00:21:04 +00:00
Power powerManager;
bool Power::psu_on;
#if ENABLED(AUTO_POWER_CONTROL)
#include "../module/temperature.h"
#if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN)
#include "controllerfan.h"
#endif
millis_t Power::lastPowerOn;
#endif
/**
* Initialize pins & state for the power manager.
*
*/
void Power::init() {
psu_on = ENABLED(PSU_DEFAULT_OFF); // Set opposite state to get full power_off/on
TERN(PSU_DEFAULT_OFF, power_off(), power_on());
}
/**
* Power on if the power is currently off.
* Restores stepper drivers and processes any PSU_POWERUP_GCODE.
*
*/
void Power::power_on() {
#if ENABLED(AUTO_POWER_CONTROL)
const millis_t now = millis();
lastPowerOn = now + !now;
#endif
if (psu_on) return;
OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE);
psu_on = true;
safe_delay(PSU_POWERUP_DELAY);
restore_stepper_drivers();
TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY));
#ifdef PSU_POWERUP_GCODE
GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWERUP_GCODE));
#endif
}
/**
* Power off if the power is currently on.
* Processes any PSU_POWEROFF_GCODE and makes a PS_OFF_SOUND if enabled.
*
*/
void Power::power_off() {
if (!psu_on) return;
#ifdef PSU_POWEROFF_GCODE
GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWEROFF_GCODE));
#endif
#if ENABLED(PS_OFF_SOUND)
BUZZ(1000, 659);
#endif
OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE);
psu_on = false;
}
#if ENABLED(AUTO_POWER_CONTROL)
#ifndef POWER_TIMEOUT
#define POWER_TIMEOUT 0
#endif
/**
* Check all conditions that would signal power needing to be on.
*
* @returns bool if power is needed
*/
bool Power::is_power_needed() {
if (printJobOngoing() || printingIsPaused()) return true;
#if ENABLED(AUTO_POWER_FANS)
FANS_LOOP(i) if (thermalManager.fan_speed[i]) return true;
#endif
#if ENABLED(AUTO_POWER_E_FANS)
HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true;
#endif
#if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN)
if (controllerFan.state()) return true;
#endif
if (TERN0(AUTO_POWER_CHAMBER_FAN, thermalManager.chamberfan_speed))
return true;
if (TERN0(AUTO_POWER_COOLER_FAN, thermalManager.coolerfan_speed))
return true;
// If any of the drivers or the bed are enabled...
if (X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON || Z_ENABLE_READ() == Z_ENABLE_ON
#if HAS_X2_ENABLE
|| X2_ENABLE_READ() == X_ENABLE_ON
#endif
#if HAS_Y2_ENABLE
|| Y2_ENABLE_READ() == Y_ENABLE_ON
#endif
#if HAS_Z2_ENABLE
|| Z2_ENABLE_READ() == Z_ENABLE_ON
#endif
#if E_STEPPERS
#define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON
REPEAT(E_STEPPERS, _OR_ENABLED_E)
#endif
) return true;
#if HAS_HOTEND
HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0 || thermalManager.temp_hotend[e].soft_pwm_amount > 0) return true;
#endif
if (TERN0(HAS_HEATED_BED, thermalManager.degTargetBed() > 0 || thermalManager.temp_bed.soft_pwm_amount > 0)) return true;
#if HAS_HOTEND && AUTO_POWER_E_TEMP
HOTEND_LOOP() if (thermalManager.degHotend(e) >= (AUTO_POWER_E_TEMP)) return true;
#endif
#if HAS_HEATED_CHAMBER && AUTO_POWER_CHAMBER_TEMP
if (thermalManager.degChamber() >= (AUTO_POWER_CHAMBER_TEMP)) return true;
#endif
2021-06-25 19:50:09 +00:00
#if HAS_COOLER && AUTO_POWER_COOLER_TEMP
if (thermalManager.degCooler() >= (AUTO_POWER_COOLER_TEMP)) return true;
2021-06-25 19:50:09 +00:00
#endif
return false;
}
/**
* Check if we should power off automatically (POWER_TIMEOUT elapsed, !is_power_needed).
*
* @param pause pause the 'timer'
*/
void Power::check(const bool pause) {
static millis_t nextPowerCheck = 0;
const millis_t now = millis();
#if POWER_TIMEOUT > 0
static bool _pause = false;
if (pause != _pause) {
lastPowerOn = now + !now;
_pause = pause;
}
if (pause) return;
#endif
if (ELAPSED(now, nextPowerCheck)) {
nextPowerCheck = now + 2500UL;
if (is_power_needed())
power_on();
else if (!lastPowerOn || (POWER_TIMEOUT > 0 && ELAPSED(now, lastPowerOn + SEC_TO_MS(POWER_TIMEOUT))))
power_off();
}
}
#if POWER_OFF_DELAY > 0
/**
* Power off with a delay. Power off is triggered by check() after the delay.
*
*/
void Power::power_off_soon() {
lastPowerOn = millis() - SEC_TO_MS(POWER_TIMEOUT) + SEC_TO_MS(POWER_OFF_DELAY);
}
#endif
#endif // AUTO_POWER_CONTROL
#endif // PSU_CONTROL || AUTO_POWER_CONTROL