MarlinFirmware/Marlin/src/lcd/extui_anycubic_i3mega_lcd.cpp

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

/**
 * extui_anycubic_i3mega_lcd.cpp
 */

#include "../inc/MarlinConfigPre.h"

#if ENABLED(ANYCUBIC_LCD_I3MEGA)

#include "extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h"
#include "extui/ui_api.h"

#include <Arduino.h>    // for the ::tone() call

namespace ExtUI {

  void onStartup()        { AnycubicTFT.OnSetup(); }
  void onIdle()           { AnycubicTFT.OnCommandScan(); }
  void onPrinterKilled(PGM_P const error, PGM_P const component) { AnycubicTFT.OnKillTFT(); }
  void onMediaInserted()  { AnycubicTFT.OnSDCardStateChange(true); }
  void onMediaError()     { AnycubicTFT.OnSDCardError(); }
  void onMediaRemoved()   { AnycubicTFT.OnSDCardStateChange(false); }
  void onPlayTone(const uint16_t frequency, const uint16_t duration) {
    #if ENABLED(SPEAKER)
      ::tone(BEEPER_PIN, frequency, duration);
    #endif
  }
  void onPrintTimerStarted()  { AnycubicTFT.OnPrintTimerStarted(); }
  void onPrintTimerPaused()   { AnycubicTFT.OnPrintTimerPaused(); }
  void onPrintTimerStopped()  { AnycubicTFT.OnPrintTimerStopped(); }
  void onFilamentRunout(const extruder_t extruder)   { AnycubicTFT.OnFilamentRunout(); }
  void onUserConfirmRequired(const char * const msg) { AnycubicTFT.OnUserConfirmRequired(msg); }
  void onStatusChanged(const char * const msg) {}
  void onFactoryReset() {}

  void onStoreSettings(char *buff) {
    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
    // permanent data to be stored, it can write up to eeprom_data_size bytes
    // into buff.

    // Example:
    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
    //  memcpy(buff, &myDataStruct, sizeof(myDataStruct));
  }

  void onLoadSettings(const char *buff) {
    // Called while loading settings from EEPROM. If the ExtUI
    // needs to retrieve data, it should copy up to eeprom_data_size bytes
    // from buff

    // Example:
    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
    //  memcpy(&myDataStruct, buff, sizeof(myDataStruct));
  }

  void onConfigurationStoreWritten(bool success) {
    // Called after the entire EEPROM has been written,
    // whether successful or not.
  }

  void onConfigurationStoreRead(bool success) {
    // Called after the entire EEPROM has been read,
    // whether successful or not.
  }

  void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
    // Called when any mesh points are updated
  }

  #if ENABLED(POWER_LOSS_RECOVERY)
    void onPowerLossResume() {
      // Called on resume from power-loss
    }
  #endif

  #if HAS_PID_HEATING
    void onPidTuning(const result_t rst) {
      // Called for temperature PID tuning result
    }
  #endif
}

#endif // ANYCUBIC_LCD_I3MEGA