3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-14 06:21:44 +00:00
Code Issues Releases Wiki Activity
434a2dcbf2
MarlinFirmware/Marlin/src/lcd/dogm/dogm_bitmaps.h

587 lines
40 KiB
C
Raw Normal View History

Further cleanup of comments, partial Doxygen-style Following up on #3231
2016-03-25 06:19:46 +00:00
/**
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
Further cleanup of comments, partial Doxygen-style Following up on #3231
2016-03-25 06:19:46 +00:00
/**
Updates u8glib's bmp2hex converter
2016-07-19 02:16:30 +00:00
* Standard Marlin Bitmap for splashscreen
*
* You may use one of the following tools to generate the C++ bitmap array from
* a black and white image:
*
* - http://www.marlinfw.org/tools/u8glib/converter.html
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
*
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
* Please note that using the high-res version takes 402Bytes of PROGMEM.
*/
Make sure binary.h is included as needed
2018-02-01 10:12:45 +00:00
#include <binary.h>
Replaced some literal constants with defines Replaced calculation to centre bitmap with fixed values. Saved 20 bytes.
2015-02-03 08:52:29 +00:00
//#define START_BMPHIGH
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 17:32:23 +00:00
#if ENABLED(SHOW_BOOTSCREEN)
#if ENABLED(START_BMPHIGH)
#define START_BMPWIDTH 112
#define START_BMPHEIGHT 38
added high and low resolutions version of splash screen logo (saving code size)
2015-01-09 17:49:24 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char start_bmp[] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF,
0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF,
0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x3F, 0xFF,
0xC0, 0x0F, 0xC0, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x18, 0x00, 0x1F, 0xFF,
0xC0, 0x3F, 0xE1, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x0F, 0xFF,
0xC0, 0x7F, 0xF3, 0xFF, 0x80, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x07, 0xFF,
0xC0, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x03, 0xFF,
0xC1, 0xF8, 0x7F, 0x87, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x01, 0xFF,
0xC1, 0xF0, 0x3F, 0x03, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xFF,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x1F, 0x00, 0x03, 0xE0, 0x78, 0x3C, 0x03, 0xF0, 0x7F,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0xC0, 0x0F, 0xF8, 0x78, 0x3C, 0x07, 0xFC, 0x3F,
0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0xE0, 0x1F, 0xFC, 0x78, 0x3C, 0x0F, 0xFE, 0x1F,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0xF0, 0x3F, 0xFE, 0x78, 0x3C, 0x1F, 0xFE, 0x0F,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xF3, 0xF8, 0x3F, 0x3E, 0x78, 0x3C, 0x3F, 0x3F, 0x07,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xE0, 0xFC, 0x7C, 0x1F, 0x78, 0x3C, 0x3E, 0x1F, 0x07,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x7C, 0x7C, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x7C, 0x78, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xE0, 0x3C, 0x78, 0x00, 0x7C, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0x3F, 0xF8, 0x00, 0x7F, 0xBC, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0x3F, 0xF8, 0x00, 0x3F, 0xBF, 0xFC, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0xFF, 0x3F, 0xF8, 0x00, 0x1F, 0xBF, 0xFC, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0x3F, 0xF8, 0x00, 0x0F, 0xBF, 0xFC, 0x0F, 0x03,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E,
0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x80 };
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 17:32:23 +00:00
#else
#define START_BMPWIDTH 56
#define START_BMPHEIGHT 19
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char start_bmp[] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF,
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F,
0x83, 0xCF, 0x00, 0x00, 0x0C, 0x30, 0x3F,
0x87, 0xFF, 0x80, 0x00, 0x0C, 0x30, 0x1F,
0x86, 0x79, 0x80, 0x00, 0x0C, 0x00, 0x0F,
0x8C, 0x30, 0xC7, 0x83, 0x8C, 0x30, 0xE7,
0x8C, 0x30, 0xCF, 0xC7, 0xCC, 0x31, 0xF3,
0x8C, 0x30, 0xDC, 0xEC, 0xEC, 0x33, 0xB9,
0x8C, 0x30, 0xD8, 0x6C, 0x6C, 0x33, 0x19,
0x8C, 0x30, 0xD0, 0x6C, 0x0C, 0x33, 0x19,
0x8C, 0x30, 0xD8, 0x6C, 0x0C, 0x33, 0x19,
0x8C, 0x30, 0xDC, 0x6C, 0x0E, 0x3B, 0x19,
0x8C, 0x30, 0xCF, 0x7C, 0x07, 0x9F, 0x19,
0x8C, 0x30, 0xC7, 0x7C, 0x03, 0x8F, 0x19,
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8 };
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 17:32:23 +00:00
#endif
added missing #endif
2015-01-09 19:23:38 +00:00
#endif
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 18:57:35 +00:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
// Here comes a compile-time operation to match the extruder symbols
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 16:10:48 +00:00
// on the info screen to the set number of extruders in configuration.h
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
//
// When only one extruder is selected, the "1" on the symbol will not
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 16:10:48 +00:00
// be displayed.
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 18:57:35 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
#define STATUS_SCREENWIDTH 115 // Width in pixels
#define STATUS_SCREENHEIGHT 19 // Height in pixels
#if ENABLED(CUSTOM_STATUS_SCREEN_IMAGE)
Creality Ender board support
2018-01-15 09:14:23 +00:00
#undef STATUS_SCREENWIDTH
// This file must define STATUS_SCREENWIDTH and status_screen{0,1}_bmp.
// It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and
// STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations.
Followup to Ender config
2018-01-15 11:54:44 +00:00
#include "_Statusscreen.h"
Creality Ender board support
2018-01-15 09:14:23 +00:00
#elif HAS_TEMP_BED
Followup to Ender config
2018-01-15 11:54:44 +00:00
#if HOTENDS == 0
const unsigned char status_screen0_bmp[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
const unsigned char status_screen1_bmp[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
#elif HOTENDS == 1
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 16:10:48 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#elif HOTENDS == 2
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 16:10:48 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
#else
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Followup to Ender config
2018-01-15 11:54:44 +00:00
#endif // HOTENDS
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 16:10:48 +00:00
#else
Followup to Ender config
2018-01-15 11:54:44 +00:00
#if HOTENDS == 0
const unsigned char status_screen0_bmp[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
const unsigned char status_screen1_bmp[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
#elif HOTENDS == 1
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 18:57:35 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#elif HOTENDS == 2
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
#else
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen0_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 18:57:35 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char status_screen1_bmp[] PROGMEM = {
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 01:57:01 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
Followup to Ender config
2018-01-15 11:54:44 +00:00
#endif // HOTENDS
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
#endif // HAS_TEMP_BED
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 19:35:08 +00:00
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char cw_bmp[] PROGMEM = {
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x03,0xF8,0x00, // 000000111111100000000000
Bmp fix Clockwise arrow fixed
2018-01-06 18:02:36 +00:00
0x0F,0xFE,0x00, // 000011111111111000000000
0x1E,0x0F,0x00, // 000111100000111100000000
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x38,0x07,0x00, // 001110000000011100000000
0x38,0x03,0x80, // 001110000000001110000000
0x70,0x03,0x80, // 011100000000001110000000
0x70,0x0F,0xE0, // 011100000000111111100000
0x70,0x07,0xC0, // 011100000000011111000000
0x70,0x03,0x80, // 011100000000001110000000
0x70,0x01,0x00, // 011100000000000100000000
0x70,0x00,0x00, // 011100000000000000000000
Bmp fix Clockwise arrow fixed
2018-01-06 18:02:36 +00:00
0x38,0x00,0x00, // 001110000000000000000000
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x38,0x07,0x00, // 001110000000011100000000
Bmp fix Clockwise arrow fixed
2018-01-06 18:02:36 +00:00
0x1E,0x0F,0x00, // 000111100000111100000000
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x0F,0xFE,0x00, // 000011111111111000000000
0x03,0xF8,0x00 // 000000111111100000000000
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
};
Add Babystep Z graphic overlay See PR #7593
2017-09-27 05:58:46 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char ccw_bmp[] PROGMEM = {
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x00,0xFE,0x00, // 000000001111111000000000
0x03,0xFF,0x80, // 000000111111111110000000
0x07,0x83,0xC0, // 000001111000001111000000
0x0E,0x01,0xC0, // 000011100000000111000000
0x0E,0x00,0xE0, // 000011100000000011100000
0x1C,0x00,0xE0, // 000111000000000011100000
0x7F,0x00,0xE0, // 011111110000000011100000
0x3E,0x00,0xE0, // 001111100000000011100000
0x1C,0x00,0xE0, // 000111000000000011100000
0x08,0x00,0xE0, // 000010000000000011100000
0x00,0x00,0xE0, // 000000000000000011100000
0x00,0x01,0xC0, // 000000000000000111000000
0x0E,0x01,0xC0, // 000011100000000111000000
0x0F,0x07,0x80, // 000011110000011110000000
0x07,0xFF,0x00, // 000001111111111100000000
0x01,0xFC,0x00 // 000000011111110000000000
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
};
Add Babystep Z graphic overlay See PR #7593
2017-09-27 05:58:46 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char up_arrow_bmp[] PROGMEM = {
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x04,0x00, // 000001000000
0x0E,0x00, // 000011100000
0x1F,0x00, // 000111110000
0x3F,0x80, // 001111111000
0x7F,0xC0, // 011111111100
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00 // 000011100000
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
};
Add Babystep Z graphic overlay See PR #7593
2017-09-27 05:58:46 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char down_arrow_bmp[] PROGMEM = {
Phatter arrows for Z offset overlay
2017-11-24 20:46:12 +00:00
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x0E,0x00, // 000011100000
0x7F,0xC0, // 011111111100
0x3F,0x80, // 001111111000
0x1F,0x00, // 000111110000
0x0E,0x00, // 000011100000
0x04,0x00 // 000001000000
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
};
Add Babystep Z graphic overlay See PR #7593
2017-09-27 05:58:46 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char offset_bedline_bmp[] PROGMEM = {
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
0xFF,0xFF,0xFF // 111111111111111111111111
};
Add Babystep Z graphic overlay See PR #7593
2017-09-27 05:58:46 +00:00
Followup to Ender config
2018-01-15 11:54:44 +00:00
const unsigned char nozzle_bmp[] PROGMEM = {
Add GFX overlay to UBL mesh edit (#8038) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.
2017-10-24 19:14:03 +00:00
0x7F,0x80, // 0111111110000000
0xFF,0xC0, // 1111111111000000
0xFF,0xC0, // 1111111111000000
0xFF,0xC0, // 1111111111000000
0x7F,0x80, // 0111111110000000
0x7F,0x80, // 0111111110000000
0xFF,0xC0, // 1111111111000000
0xFF,0xC0, // 1111111111000000
0xFF,0xC0, // 1111111111000000
0x3F,0x00, // 0011111100000000
0x1E,0x00, // 0001111000000000
0x0C,0x00 // 0000110000000000
};
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 19:35:08 +00:00
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
Creality Ender board support
2018-01-15 09:14:23 +00:00
#ifndef STATUS_SCREEN_X
#define STATUS_SCREEN_X 9
#endif
#ifndef STATUS_SCREEN_HOTEND_TEXT_X
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25)
#endif
#ifndef STATUS_SCREEN_BED_TEXT_X
#define STATUS_SCREEN_BED_TEXT_X 81
#endif
#ifndef STATUS_SCREEN_FAN_TEXT_X
#define STATUS_SCREEN_FAN_TEXT_X 104
#endif
Reference in New Issue Copy Permalink