1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-14 06:21:44 +00:00
MarlinFirmware/Marlin/src/pins/pins_FYSETC_F6_13.h

195 lines
4.4 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Fysetc F6 pin assignments
//
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'FYSETC_F6' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "FYSETC_F6_13"
#endif
//
// Limit Switches
//
#define X_MIN_PIN 63
#define X_MAX_PIN 64
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 12
#define Z_MAX_PIN 9
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 10
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 9 // Servos pin
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#ifndef X_CS_PIN
#define X_CS_PIN 70
#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#ifndef Y_CS_PIN
#define Y_CS_PIN 39
#endif
#define Z_STEP_PIN 43
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 58
#ifndef Z_CS_PIN
#define Z_CS_PIN 74
#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#ifndef E0_CS_PIN
#define E0_CS_PIN 47
#endif
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#ifndef E1_CS_PIN
#define E1_CS_PIN 32
#endif
#define E2_STEP_PIN 59
#define E2_DIR_PIN 57
#define E2_ENABLE_PIN 40
#ifndef E2_CS_PIN
#define E2_CS_PIN 42
#endif
//
// Sensorless homing DIAG pin is not directly connected to the MCU. Close
// the jumper next to the limit switch socket when using sensorless homing.
//
#define X_TMC2130_DIAG -1
#define Y_TMC2130_DIAG -1
#define Z_TMC2130_DIAG -1
#define E0_TMC2130_DIAG -1
#define E1_TMC2130_DIAG -1
#define E2_TMC2130_DIAG -1
#if HAS_DRIVER(TMC2208)
// Software serial
#define X_SERIAL_RX_PIN 71
#define X_SERIAL_TX_PIN 72
#define Y_SERIAL_RX_PIN 73
#define Y_SERIAL_TX_PIN 75
#define Z_SERIAL_RX_PIN 78
#define Z_SERIAL_TX_PIN 79
#define E0_SERIAL_RX_PIN 76
#define E0_SERIAL_TX_PIN 77
#define E1_SERIAL_RX_PIN 80
#define E1_SERIAL_TX_PIN 81
#define E2_SERIAL_RX_PIN 22
#define E2_SERIAL_TX_PIN 83
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 12 // Analog Input
#define TEMP_1_PIN 13 // Analog Input
#define TEMP_2_PIN 14 // Analog Input
#define TEMP_BED_PIN 15 // Analog Input
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 9 // Analog Input on X+ endstop
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 5
#define HEATER_1_PIN 6
#define HEATER_2_PIN 7
#define HEATER_BED_PIN 8
#define FAN_PIN 44
#define FAN1_PIN 45
#define FAN2_PIN 46
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define KILL_PIN 41
#ifndef PS_ON_PIN
#define PS_ON_PIN 11 // Servos pin
#endif
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 3
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 4
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 9
#endif
#ifndef RGB_LED_W_PIN
#define RGB_LED_W_PIN -1
#endif
//
// LCDs and Controllers
//
#define BEEPER_PIN 37
#define SD_DETECT_PIN 49
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(NEWPANEL)
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#endif